How to glue a ceiling skirting board - tips and tricks

Modern renovation of the apartment can not be imagined without the use of a ceiling skirting board. It is used not only when it is supplied complete with ceiling slabs, but also as a separate decorative element. Ceiling plinth allows you to give the ceiling a finished look, make it elegant and neat. Self-assembly of the ceiling skirting requires the possession of some skills that will allow to do it correctly and qualitatively.

First of all, you need to determine the type of glue. Although the question of what to glue the ceiling skirting, in our time should not cause great difficulties. The market of finishing materials can offer a huge assortment of glue compositions, which allow to produce a qualitative installation of the plinth. This process does not require special knowledge, it is only necessary to approach this simple work responsibly.

An obligatory condition that must be met before gluing the ceiling skirting is the willingness of the ceiling: it must be plastered. It is also important how the wall covering will be. If painting of walls is supposed , then it is best to make the fillet assembly after painting. When choosing wallpaper as wallpaper for walls, there are two options: you can glue the ceiling skirting to the pasting of walls or after it. In the first case, it is required to accurately fit the edges of the wallpaper in places where they are adjacent to the skirting board. When choosing the second option, you need special care, since you can spoil the wallpaper with glue. At the same time, this option has its advantages, as it allows to hide the defects of the wall abutment to the ceiling. In this case, there is no need to spend time on the exact adjustment of the wallpaper under the lower end of the plinth.

Before gluing the ceiling skirting, it is necessary to prepare the appropriate tools for the work. Necessarily need a knife (it's best to use a painter with a sharp blade), a stool for trimming fillets at an angle of 90 and 45 degrees, an acrylic sealant and a hacksaw with a small tooth (you can use a hacksaw for metal).

Before gluing the ceiling skirting, you need to determine the angle from which the work will begin. This can be an arbitrary choice, but you can start from the far corner of the room. The angle design begins with sawing fillets at an angle of 45 degrees. For this we use a chair and a hacksaw. The knife is used in case of necessity of exact adjustment already directly on the ceiling. The glue is applied on two sides: the one that will be adjacent to the wall, and the one that is adjacent to the ceiling.

Before How to glue the ceiling skirting, it is recommended to check the evenness of the wall. If necessary, it can be leveled using putty. This will allow to perform the work more qualitatively, because the junction between the fillets in the places of abutment to the walls and ceiling will be almost invisible. In addition, it is possible to make additional processing of joints between fillets on both straight sections and in corners with fine-grained putty, which is then grinded - carefully, so as not to damage the surface of the plinth.

Acrylic sealant is used at the stage of completion of work. With the help of a pistol, we process slits that can be formed at the junction points, thus creating a monolithic structure where the walls, ceiling and ceiling skirting will look like a single whole. The use of a sealant makes it possible to give additional strength to the bonding of the plinth with two adjacent bases.

In the future, you can paint the ceiling skirting in one color range with walls or ceiling or in contrast color.