HomelinessRepairs

Decorating the steam room with your own hands

It is very pleasant after a tiring and tense week of work to relax in your own bath. However, to stay in it was really healing, the room should be properly equipped. Particular importance is the internal finish of the steam bath.

General information

After the completion of the work on the construction of the foundation, the log house and the roof, the finishing of the bath and the steam room begins. This is necessary not only for aesthetic purposes. Finishing bath, steam room will provide additional tightness in the premises. Carefully done work on the arrangement of rooms will prevent the appearance of dampness and, as a consequence, decay of surfaces. If the internal finish of the steam room is not carried out correctly, the room temperature will not be maintained at the proper level. As a result, no pleasure from the visit will not, let alone relaxation. Next, consider the main options for finishing the steam room.

Materials

Decorating the steam room with your own hands as a whole is not accompanied by difficulties. However, some knowledge and skills are needed. Therefore, if experience is not enough, it is advisable to consult with knowledgeable people. Finishing of Russian pairs is carried out taking into account the features of temperature and humidity conditions. The materials used must be environmentally friendly, otherwise, when heated, harmful impurities may enter the air. This corresponds to a tree. The decoration of the steam room, made with the use of this material, also looks very aesthetic. This, in turn, sets up relaxation and relaxation. Particular importance is the insulation of the room. For this special materials are used. First, a thermal insulation layer made of mineral wool is arranged. It is available in rolls or plates.

Selection of wood

Before you finish the pair with your own hands, you need to purchase the material. When selecting wood, you should pay attention to the quality of the elements. If it is supposed to finish with a pair of lining, then it must comply with the existing standards today. This material is classified according to grades in accordance with the presence of natural defects. To the flaws, in particular, include darkened, ingrown or dropped knots, fungus, resin pockets and stuff. It should be assumed that the smaller the defect in the cladding and the higher the quality, the more aesthetic the material looks. This, in turn, enhances the pleasure of staying in the bathhouse in general and the steam room in particular. Professionals recommend using hardwood lining, as they do not emit tar.

Linden

Healing properties are not only in honey and flowers. The wood itself under the influence of high temperature spreads a pleasant smell. The lime board emits essential oils into the air. They have anti-inflammatory and bactericidal properties. Due to the high humidity in the room, the useful qualities of wood are preserved for an extended period. It should be said that the essential oils emitted by the linden are hypoallergenic. This makes wood a very valuable material. During the finishing and subsequent operation, other advantages of the material are revealed. In particular, the linden is easy to process, has almost absolute water resistance and low density.

Aspen

This wood is characterized by a pleasant light shade, moisture resistance, hygiene. Aspen is also not subject to deformation. It is considered an excellent material for finishing the steam room. Wood is not susceptible to rotting in wet conditions. Aspen has a pleasant smell. At elevated temperatures, tar is not emitted from it. In addition, the material has the ability to clean the room from the "old" couple.

Alder

This breed of wood has been used for a long time. It was used in bridge construction in the manufacture of piles, in shipbuilding. This material is also carried out and finishing the steam room. Wood is very attractive externally. Alder has a light coffee shade, which is "diluted" with marble veins. The room, finished with this material, becomes exclusive and stylish.

Abashi

This is a fairly expensive breed of African wood. The finishing of the steam room with this material is durable and reliable. Wood is resistant to moisture and high temperatures. The undoubted advantage of the material is the variety of its shades. They range from cream to light yellow. The shades are pleasing to the eye, and the interior in general looks stylish and interesting. Abashi wood is resistant to deformation and rotting, it has high strength and low density. Due to reduced thermal conductivity, the material, even when heated, does not burn the body.

Softwoods

This wood can also be used in finishing the steam room. Typically, choose those varieties that emit as few pitches as possible. For example, the finish of the steam room can be carried out by the Canadian cedar. This is a solid and expensive material, which has, among other things, antiseptic properties. When heated, dense wood with a complex coffee tint and original texture spreads a delicate aroma that can soothe, relieve stress and fatigue, relax. In this paired body is filled with strength. Canadian cedar differs thermal and moisture resistance. Wood is perfect for elite finishing.

Combined options

The original combination of several species of wood in decoration. For example, a combination of dark alder and light wood of abash, aspen or lime looks great. Choosing this or that combination, you can achieve different results. The main thing is to use high-quality materials that are resistant to environmental factors.

Ceramic tiles on the floor

When finishing the base, the main task is to arrange the slope of the surface towards the drain. Otherwise, the water will stagnate indoors. As a rule, ceramic tiles are used for finishing the floor. This is quite an economical and convenient option. First of all, we should note the simplicity in the care of the tile. It should be washed regularly using traditional means. Also, ceramic tiles are resistant to high temperature and humidity. The material has all the properties that should be in the coating in the steam room. To prevent slipping on top of the tiles, provide a removable wooden flooring, cork panels, mats made of natural fibers. The use of synthetic materials in this case is undesirable, because when heated, toxic compounds can be released into the air.

Wooden floor in the steam room

Initially, the foundation is poured with concrete. On a coupler after its drying up establish brick columns, section which 25х25. Instead of concrete, there can also be a normal underlying layer of sand. The logs are laid logs. For flooring, use edging or sheet piling boards. They are laid on logs. Wooden elements must be impregnated with antiseptic compounds. Treatment will prevent the rotting process. In the steam room is arranged 15 cm higher than in the washing room. Wooden flooring undoubtedly has many advantages. First, it's warm. Secondly, the wooden floor is non-slip (unlike the ceramic coating). In addition, the flooring will perfectly match with the facing of the walls. However, it has a wooden cover and a minus. The material, in contrast to the same ceramic, wears out quickly enough.

Interior

An integral part of quality rest is aesthetic pleasure. In this regard, the finish of the steam room should be, among other things, beautiful. The original design can be created independently or attracted to this professional. In addition, you need to think carefully and the lighting system. For a small steam room, one luminaire in a sealed enclosure will suffice. Do not install switches and sockets in the room itself. They must be mounted outside of it. To reduce the probability of ignition of the wiring due to a short circuit, the luminaires are built into the ceiling.

Special protection of materials

The stitching of the steam room, which is in a constant humidity and high temperature, requires additional processing. For this, special impregnations are used. They contain safe ingredients that are harmless to the human body. Quality compounds do not affect the appearance of coatings. Under the influence of moisture and temperature, impregnation does not release harmful compounds into the air. During processing and after it, during the operation, unpleasant odors do not emanate from the formulations.

What is not recommended for decoration?

Absolutely not suitable for premises such materials as plastic, wood plates, pine boards, linoleum. All of them are categorically not recommended in the decoration of the steam room. For example, linoleum and plastic begin to release harmful compounds, and pine - resin at elevated temperatures. Fibreboard and chipboard are also not suitable for the steam room due to its hygroscopicity and fire instability.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.