Polyfoam: how to paint it? Technology of work

Polyfoam is a popular material used in almost all spheres of human life. It is known in construction, where it is often used to create ceiling tiles, curbs and plinths. These elements are produced in white color. Therefore, consumers often have questions about polystyrene foam: how to paint this material, how to apply the technology of applying paint?

Advantages of staining foam

Products made of this material are usually used in various rooms of the room. They are characterized by durability, but after a few years they may lose their original appearance. Therefore, the color will update the ceiling tile or baguette. In general, we can distinguish the following advantages of staining the foam:

• Protect new items from dust, moisture, grease stains. Especially if the tile is used in the kitchen.
• Refreshes with time the yellowed foam.
• It will facilitate the care of the coating, allowing it to be cleaned without difficulty.

To paint tiles from a foam plastic it is possible in any color: in classical white or in the basic shade of an interior. In this case, the room will become a complete view.

Paint for foam

Foam plastic products are very sensitive to all kinds of solvents, so you have to approach the choice of paint carefully. The quality of the selected product determines not only the appearance of the tiles or plinth, but also the term of their use. The foam coating should meet the following requirements:

1. High adhesion to the surface of the surface.
2. Moisture resistance.
3. Dense structure.
4. Resistant to various detergents.
5. The ability not to burn out under the action of direct sunlight.

The paint must be water-based. Well, if it does not have in its composition of solvents, white spirit and acetone, detrimental to the foam. Than to paint this material, to solve easily, as only two kinds of paints meet all necessary requirements. It's about acrylic or water-based products.

Acrylic paint

This type of coating positively proved itself among the substances of the water-dispersed group. It has the following advantages:

• Protects from ultraviolet radiation.
• Characterized by a long period of operation.
• It dries quickly.
• Is safe for human health.
• It has no smell.
• It's just applied.
• Resistant to dirt, easy to clean.
• Not afraid of high temperatures.
• It differs in a variety of shades.

Among the shortcomings, it should be noted the high price of acrylic paints: the better the product, the higher the cost. However, this negative easily overlaps with the positive qualities that the water-dispersed material possesses.

Water-based paint

Asking the question about what can be painted foam, it is worth paying attention to the water-based coating, characterized by the following advantages:

1. Exactly lies on the surface.
2. Is ecological.
3. It has no smell.
4. It has a vapor permeability.
5. Well-tinted in a variety of shades.
6. Has a low price.

However, water-based paint has drawbacks. This paint is unstable to dirt, poorly tolerates wet cleaning. In addition, the coating is washed off with water over time, and can exfoliate if applied abundantly. Despite these drawbacks, water-based paint is the most popular among the substances of the water-dispersed group.

Recommendations for the coloring of tiles

Knowing what to paint a ceiling tile from a foam plastic, it is possible to start active actions. The technology of works consists of several stages: preparation of the room and tools, preparation of foam elements, actual painting. The first stage involves the following actions: it is necessary to remove or cover furniture, to lay the floor and walls, if they are not updated. You also need to wear protective clothing, special eyewear, a headscarf. From the tools you need: rollers, brushes of different sizes, stepladder, container for paint.

At the second stage, it is important to consider whether a new or old one has a styrofoam than to paint it better, which is worth considering. If the tile is new, then it is necessary to carefully seal all the joints with the sealant or putty, check whether the elements are glued on everywhere, glued in the event of a corner departure. It is recommended to clean the old tiles from dust. It should be washed with a foam sponge, if necessary, renew the joints. Before painting, the ceiling tile is well primed with a water-based solution.

The third stage is the direct staining of the foam. It includes the following important points:

• From tools you can use a roller, brush or spray gun.
• The relief surfaces must first be painted with a brush.
• Do not put too much paint on the roller, so that there are no streaks and thick layers.
• Near the walls it is recommended to use a small brush, in order to avoid unwanted spots on them.
• Painting is necessary in one direction. It is better to start from the window.
• The second layer is applied perpendicular to the first after it has completely dried.

Thus, it is important to know when decorating a foam, than to color this material, what kind of preparatory work to produce. The technique of staining has been described in the article, so use these tips when carrying out such work.