How to remove the handle from the interior door: the necessary tools, instructions

It will be useful for any owner to know how to disassemble the handle on the door, especially the interior. This furniture is subjected to a serious test by all tenants, so one day it will fail, and it will be necessary to replace it with another one. In this case, you do not need to call specialists, you can manage on your own, saving at the same time on the payment of labor of an employee. Moreover, this case does not require great skill, but only a few skills. The dismantling process may differ depending on the type of handle, but the whole process should not cause special difficulties. How to remove the handle from the interior door? Before proceeding with the analysis of the mechanism, it is necessary to find out what kind of classification it refers to. The division takes place according to several criteria. Described below is suitable for parsing the handle, because it has a classification of the design features.

Types of pens

Pressing. Such a handle is attached on both sides of the door leaf and has an L-shape. Opening is due to the load on the handle, after which the tongue is set in motion. The disadvantage of this hardware is that it is very traumatic.

Swivel. The way of opening is the same as for pressing, only the tongue is set in motion not by pressing the handle, but by turning it. Such models are often not very convenient, because to scroll it, hands must be dry, otherwise they will slip. When replacing them, a reasonable question arises as to how to unscrew the interior door handle.

Stationary. Such a handle does not have a latch. It is fixed with screws to the door leaf. It can be single- or double-sided, with an axial connecting element.

Reason for handle parsing

Disassemble any of the models of door handles is not so difficult, because they have a similar design.

At the same time, it is extremely rare to analyze this hardware. What reasons can lead to this? How to remove the handle from the interior door?

The first reason is failure. It occurs most often. Frequently, cheap Chinese models are subject to breakage, which are not designed for constant and rough load. If the prevention of certain elements is not observed, the fittings will become unusable. It should be repaired, and sometimes completely replaced the whole element.

The next reason is the need for a replacement. Every year the market is replenished with new and improved models. At the same time, you can choose the color range suitable for the interior, or put a new, more functional and reliable model.

Repair in the room often implies a change of style. Do not ignore the door handles. Therefore, the question often arises as to how to disassemble the door handle.

Another reason is a spoiled appearance. If the part is made of low-quality material, then it will very soon be visible scratches and scratches, which negatively affects the entire interior.

Remove the pressure knob

How to remove the handle from the interior door of the pressure type? This mechanism is more complicated for disassembly, because in its design there is an axis of the shaft, due to which the handle holds. It is tightened by a tetrahedron.

The process of parsing the handle must begin with the removal of the plugs around it. They are fixed with screws or tightly pressed. They are very simply removed with a minus screwdriver.

Next, you need a tetrahedron, which will reduce the strength of the rod.

On one side of the door, you need to unscrew the hardware and remove it. Then, the second part, on which the axis rod remains, is removed.

If the handle with a lock for interior doors, it is also removed.

Observance of consistency and accuracy will make it possible to remove the mechanism without problems, without damaging the details and creating unnecessary troubles.

How to remove the handle from the interior swivel door with a socket?

When the swivel type hardware does not have a hole in the side where a key or screwdriver can be inserted, the elements are disconnected manually. Both parts of the handle should be scrolled in different directions and gradually removed from the thread. On one of them there will be an axial rod. Similarly, remove the socket and unscrew the screws. When the axis is removed, you can tackle the following elements - a latch or lock, if necessary. When the decorative parts are removed, you need to monitor the use of your strength, because overdoing, you can damage the elements.

Remove the rotary knob

The handle with the lock for interroom doors of rotary type is removed as follows.

To do this, you need a key for clamping the spring mechanism. Often it is not included in the package with the product, but it can easily replace a nail or other thin object.

First of all, you need to remove the decorative plates, which you can just poke a sharp object.

With the key or nail, push the spring-loaded pin out by inserting the tool into the process opening on the side. At the same time, pull the handle and remove it with the cap.

Then the decorative flange is removed. For this purpose, the latch is pushed.

After that, remove the fastening screws located on the plate. Then the two parts of the handle will be released with the axle.

It is not difficult to assemble the handles for round doors, only all the steps have to be done in the reverse order. First comes the installation of the lock, which is fixed by the plate, then the axis is inserted, fasteners are put on it. Decorative inserts are mounted last. The main thing is not to forget that the decorative flange is first passed, and then the main part of the handle is attached.

Remove stationary pen

How to disassemble a stationary door handle ? They are the least likely to break or deform. This is due to the lack of moving elements in it. Often, door handles of this type after removal do not repair, but change entirely. The process of removal is as follows:

1. Screwdrivers are untwisted.
2. One part is unscrewed from the rod, and the second is removed with it.

Such a design may lack a central core, this greatly reduces the process. It will only be necessary to select the correct screwdriver to unscrew the screws of a certain diameter.

Remove the handle with the latch

First of all, when the handle-latch for interior doors with an automatic lock is dismantled, it is necessary to remove the screws with a screwdriver. Then unfasten the overhead elements. Using a wrench, unscrew the rod. After this, pull out the swivel mechanism, wound by a spring.

A popular way

There are several ways in which the handle-latch for the interior doors of a circular shape with a lock is removed. Here is the most popular of them.

Decorative pads should be removed with a screwdriver, first with the part where the locking device is located. On the opened stopper it is necessary to press and simultaneously to pull to itself the handle.

Then, the two screws are unscrewed, after which the parts of the latch are removed.

Then the latch is pulled out, for which the screws are loosened, after the latch is released.

Thus, to disassemble any door handle with your own hands is not a big difficulty.