Telescopic baton: permission. Telescopic baton: making your own hands

Telescopic batons are produced in factories and are intended for arming the police. In Russia, a telescopic truncheon, the permission for free use of which has only power structures, is an excellent shock weapon.

It has a high degree of efficiency and compactness. The basis of its action is very simple. It is a small tube made of metal.

Only the police use it

Remember that you can use this kind of weapon, being in close position from the opponent. In addition, a telescopic truncheon, a permit for which in the Russian Federation is given only to certain individuals, is not subject to storage, transfer and use by ordinary citizens. Permission can be obtained by police officers.

Nevertheless, there is still a way out of this situation. If you defended, then you will not be legally responsible. If the police find a club from a simple passer-by, then it is simply confiscated.

The design of a telescopic baton

The telescopic baton, the permission for which is only for power structures, consists of a series of cylindrical parts that are nested inside each other and move apart according to the principle of the telescope. This type of weapon is quickly opened by simply pressing a button or swinging a hand. The principle of operation is the same as that of a police baton. She for a while neutralizes a person who shows aggression towards you.

The telescopic baton is highly efficient. It is designed for permanent wearing when folded. The product consists of several cylinders, which in the combat state are extended by a length limited by internal stops.

There are three types of telescopic batons that can be made at home:

• Telescopic baton is plastic. The basis is plastic. The injuring part is a whip. At its end is welded a ball of metal.
• The key model. The basis is the castle, which fixes the links. The lock button is located in the end part. When pressed, the baton opens. The model that opens through turning is very rare.
• Telescopic truncheon spring. The basis of the product is an outer metal cylinder of 2-3 steel springs, which are nested inside each other.

Terms of use

A telescopic baton, which can not be obtained in the Russian Federation, is used in many countries as a means of arming the police.

The telescopic baton, which testifies that it is very convenient, due to its compactness and low visibility, is used when applying four techniques:

• Hit from the left;
• Hit from the right side;
• Blow from above;
• Blow from below.

Movement at impact is carried out gently, without tension. Brush your hand slightly delayed. Only if these conditions are met will the person's blow be palpable. The strength here is not the main thing. Pay attention to the smoothness.

The main condition is the appearance of a baton in the field of view of the enemy unexpectedly. She's disguised to the last. It should be opened immediately before striking. Targets for strikes are legs, thighs, knees, groin. They use a truncheon against a person who attacks you with a knife.

Model of the telescopic baton of the Czech company ESP

Telescopic baton ESP is intended for use at a professional level by the police and the armed forces.

In the production of batons of the ESP series, high-strength steel of the 4130 series is used. The pipes do not have a seam.

The telescopic baton ESP consists of three pipes. It is built on the principle of nesting dolls. The steel is hardened, so the club is not deformed. The hardness level of steel is 40-50 HRC.

Unified method of manufacturing batons in the home

The article will tell you how to make a telescoping baton Yourself from the materials that are at hand. The main manufacturing methods will be considered.

The telescopic baton with its own hands is made of ordinary water pipes made of steel with different diameters. This is done so that one pipe can enter another. In order for the pipe diameter to fit perfectly, apply the turning of the outer and inner circumference. This processing makes it possible to slide the pipes well into each other.

The end of each component is somewhat extended. The opposite end, on the contrary, assumes a narrow conical shape. This method of production achieves the effect of the lock, when the baton is opened from the swing of the hand, and the parts are tightly fixed with each other. The segment with the smallest thickness can be made not from a pipe, but from a single piece of metal reinforcement, at the end of which a thread is cut and a weighting agent is attached. In its role protrudes a blank - the tip of a round or cylindrical shape.

One of the tips of the segment with the largest thickness should be closed with a threaded plug for bludgeoning. It will also be possible to lubricate, clean and repair. The better the diameter of the truncheons is adjusted to each other, the more functional the product will have. He will not be skewed and jammed. To prevent the club from opening, a magnet is attached to the stub from the furniture, which can draw links to it.

Classical design of a telescopic baton

This model includes the following details:

• Castle;
• Stub;
• The first knee;
• The second knee.

The basis of the first elbow is a steel pipe, at the end of which there is a slot. It is inserted into the lock. The basis for the second knee is a metal armature. On one side of the rod is chamfered, so that the second knee does not scroll in the first.

Chamfer ensures the sliding of the lock snapping into the slots. It is located on its end. When the second knee extends, the lock falls into the groove and is fixed in the extended state.

A telescopic baton with your own hands can be composed in another way. It can be made of three or four parts. Accordingly, the number of locks increases.

The tail of the club closes with a stub, so that the inside of the knee does not fly out from the other side. The plug can be made of wood in the form of a cork or metal with the presence of thread.

Lathe manufacture

How to make a telescopic baton of high quality? Such a tool is made on a lathe made of ordinary steel. The advantage of this design is that no additional turning of internal and external surfaces is required. Grinding is also not needed.

In the event that there is no turner who can cut the whole object, you can order it in separate parts from several masters or in several receptions at one. But it will take a long time.

The level of effectiveness of this weapon is quite high. The blow to the limb is painful and for a time paralyzes the person. If you hit on the head or neck, then you can easily kill a person.

Transfer baton is also very convenient. It fits perfectly in the case from the mobile phone. In order to open the weapon, it is enough to take it and wave it with your hand.

The baton will open, and the links will be fixed. It is more difficult to form, since the components are fixed firmly. To fold the product, hit the thick end of the gun on a hard surface. Disclosing a baton affects the opponent and psychologically.

In the event of a fight, it is advised to keep the baton on the strap, which serves as a secure latch. So the enemy can not get her out of hand.

American baton model

Folding baton telescopic American model should be no more than half a meter. To make it, you need to prepare 4-5 tubes of 10 cm from steel with different diameters.

Make sure that each tube tightly enters the other. The inner part of the pipes must be sealed so that when opening, the one that is inside does not fall out. Also we need a weighting agent, located on the smallest tube. He looks like a knob. A very short baton is not very suitable for use.

Improving a club

If we talk about the methods of improving the folding telescopic baton, then the upper hollow segment can be filled with shot or sand. This will provide an easy swing. During the impact, the ballast inside will make the impact heavier. This truncheon is somewhat like a kisten.

Also in the telescoping baton you can mount the electric shock. It is produced in factories. It can be worn openly. The kit is supplied with a cover under the umbrella. The electric shock has a minus - it is somewhat fragile, because it is made of plastic.