The roof is broken. It's not that difficult to build with your own hands

If you are building a house and want to make its top floor more spacious, a broken roof, built by your own hands, will be the ideal choice of design for your situation. This is not too complicated a project, even for implementation alone, and the result exceeds all expectations - an additional area and an elegant architectural solution can decorate any home.

What will be required for the construction?

So, your choice is a broken roof. It is not very difficult to make it with your own hands. To do this you will need to purchase edging boards, plywood, timber and fasteners. It is important to pay attention to the quality of materials, since the load on the elements of the system will be serious, and bad bars or boards can mean the rapid destruction of the roof. Also, the wood must be thoroughly dried and treated with fire and parasites. It is best if the tree, which became the basis for building materials, will be coniferous.

Roof installation with own hands

A broken roof, built by oneself over a cottage or a private house, is convenient not only for additional space, but for the relative simplicity of construction. For the erection does not need a heavy lifting equipment, because individual elements of the system can be prepared in parts. All the main parts need to be cut by the template, and the fastening is done with plywood and self-tapping screws. Prepare the roof sections in the order in which they will be on the roof, so they will be more convenient to lift them. The roof of the broken line with its own hands will be built in parts, beginning with the side sections. On how exactly they are installed, the rest of the structure depends. Fixing them, dock them to the top of the structure, fastening the sides together. The upper run will be the guide for the position of the rafter feet. After installing the beam-run it is necessary to fix the frame with the braces to maximize the strength and stability. Then proceed to install the vertical side racks. Then the outer side of the rafters is covered with plywood sheets. This stage is the last in the process of creating a rafter system. The roof broken by own hands is practically made and it remains only to make roofing work. For the roofing and roofing works, quality materials are also important, which exclude deformation and leakage of the roof. When all parts of the structure are ready, treat them with protective antifungal and flame retardants, if the wood has not been treated initially.

Insulation of the under-roof space

Due to the fact that the roof is broken, with its own hands is often made as an attic, insulation and waterproofing become especially important for comfort. Thermal insulation is important to think about even at the stage of the crate placement. Its step must correspond to the dimensions of the thermal insulation blocks. After all sections have been installed, you can lay a waterproofing film. It is best to choose a material that provides a vapor barrier, as a living room under the roof will create excess of moist air, which needs an exit. Then even heavy snow or rain will not disturb your peace of mind in a house built with your own strength with an excellent mansard sloping roof.