Painting wallpaper - painting technology

Wallpaper for painting - one of the most popular finishing materials. The buyer, first of all, attracts the possibility of an independent choice of a color solution. You can not discount the fact that reusable painting of the wallpaper significantly saves money and time. I must say that the technology of finishing in this case differs little from the usual. First, clean the walls of the old coating, apply putty, then glue the wallpaper. To top it off, apply two coats of paint.

Thanks to the fact that the painting of the wallpaper can be made in a wide variety of techniques (spraying, gilding, feathering), there is a huge scope for imagination. The simplicity with which you can turn boring walls into the decoration of any home is amazing.

Make wallpaper for painting from nonwoven, paper, vinyl and fiberglass. The surface of the canvas can be embossed or smooth. In the first case, a beautiful solution is to paint the wallpaper in several shades. How to implement this in practice, we'll talk a little later.

As for the choice of suitable wallpapers, we note that the most popular materials are non-woven and vinyl. Paper does not do very well with the task. Recolor these wallpapers will be, at best, a couple of times. Fiberglass is quite expensive and not suitable for every room. Although of all these options looks most presentable.
The original color of the wallpaper for painting should be necessarily white. Otherwise, it is difficult to predict the final result.

If the walls in the room are not ideal, it is not at all necessary to bring them to perfection with putty and cycle. Just use a two-layer non-woven wallpaper. They successfully hide the small flaws. Pay attention to a series of finishing materials Patent Decor from Marburg (Germany). These wallpapers fully meet all the requirements of high-quality wall coverings.

Now a little about how to paint the wallpaper for painting. The technology of finishing involves the use of water-based materials, so-called emulsions. On the label of such a paint is labeled VD. Depending on the ingredients included in the composition, the emulsions are divided into polyvinyl acetate, latex and acrylic. The first ones are inexpensive, but this does not mean that their quality leaves much to be desired. Just such a paint is used only in a dry room. Its operating properties are somewhat lower, in comparison with latex and acrylic emulsions. In a more accessible language, the polyvinyl acetate dye quickly fades under direct sunlight. So, the wall will have to be repainted every two to three years. In addition, using a water-emulsion paint based on surfactant can only get a matte surface.
Best of all, this coating is suitable for wallpaper of paper and nonwoven.

Paints based on latex are the most expensive in their segment. Their cost is affected by high-tech additives, which determine the excellent performance of the finished coating. Latex paints are resistant to moisture and ultraviolet, can be used for any kind of wallpaper. Since they have an increased coefficient of elasticity, they are especially recommended for relief surfaces.

Acrylic paints are a versatile option. They are suitable for any type of work, including such as painting the wallpaper on the walls or the ceiling.

Painting the wallpaper is done with a conventional paint roller in two layers. Before starting the painting, the adhesive must dry completely. Before applying the paint on the wall, its excess from the roller is carefully removed. To avoid staining the ceiling, it is recommended to use a brush. With its help, first apply a strip of sufficient width along the entire perimeter of the room and after that already work as a roller. The direction of movement can be different, but the last strokes are directed from the top down to create the effect of a neatly colored vertical surface.

In conclusion, some tips on how to color the wallpaper in several colors.

Method one: the paint on the wallpaper is applied with a roller or brush on the reverse side. Due to the different density of the substrate and the relief pattern, the same dye acquires different shades. As you can see, the idea is simple, but rather laborious.

Method two: the excess paint is washed off with a damp sponge. This option is much simpler than the previous one. The non-woven base absorbs the paint almost immediately, while from the foamed areas the color can easily be erased.

So you can get wallpaper with an interesting texture. The design solution, playing the nuances of one tone, always looks elegant, fashionable and relevant.

Coloring the wallpaper in two colors is also not difficult. First, apply the substrate, and then use a sponge with a lighter shade. In this case, you can use bright contrasting colors, silvery or golden paint. Give vent to your imagination, because wallpaper for painting allows you to implement any ideas.