HomelinessRepairs

PF 115 paint: specifications, prices, composition, manufacturer

PF 115 paint, whose technical characteristics make it possible to judge it as one of the best paint materials on the domestic market, can be used for finishing surfaces of wood and metal both on the street and in the premises. This is a modern tool, resistant to the effects of technical oils and detergents, moisture and weatherproof.

Composition

It is a paint PF 115, the technical characteristics of which will be considered in detail below, alkyd enamel. This type of paintwork creates a much more durable and durable film on the surface of the workpiece than oil and water-based products. The composition of the enamel paint PF 115 includes the following substances:

  • White pigment (rutile form of titanium dioxide) ,
  • Varnish semi-finished PF 060,
  • Color pigments,
  • Fillers (microcalcite, microtalc).

Varnishes marked with the letters "PF", are made on the basis of pentaphthalic resin, which has been modified by oil. Add this ingredient in enamel PF 115 to give it a gloss.

Paint enamel PF 115: characteristic, price

Alkyd enamel of this brand is used for painting steel, cast iron and wood with preliminary priming of the surface. Since the film produced by it is distinguished by its strength and elasticity, it is usually not necessary to apply a large number of layers. Most often enough one - three. Enamel PF 115 is both matte and glossy. The color scheme of this tool is very wide, so you can easily choose the option that is suitable for any interior or exterior.

One of the undoubted advantages of enamel PF 115 is its low cost. This product is sold in containers of different volumes. The most popular with the consumer is put up in cans of 1.9, 0.9, 2.7 kg enamel PF 115. Prices for PF 115 paint (per kilogram) can fluctuate within 110-130 rubles. When carrying out painting works of a large volume, it is more expedient to buy a product in containers, for example, 20 kg each. For one bucket in this case it is necessary to pay about 2500-2600 rubles.

The only drawback of enamel PF 115 is that it ignites very quickly. Therefore, it is impossible to paint metal surfaces exposed to open fire.

Specifications

A well-thought-out, well-balanced composition determines the excellent performance properties of such a varnish as paint PF 115. The technical characteristics of this product are presented in the table.

Parameter

Characteristic

Viscosity

60-120 min.

Drying time

Day

Content of non-volatile substances

50-70%

Elasticity

Bending up to 1 mm

Shine

50 %

Hardness

0.10 units.

Adhesion

Not more than 1 point

Moisture resistance

Not less than 2 hours

Resistance to the influence of transformer oils

24 hours

Resistance to detergents (0.05%)

15 minutes.

Strength

40 centimeters

Life time

5 years

Working temperature

-50 ... +160 о С

Temperature at application

5-30 degrees

Consumption

80 g / m 2

Scope of use

Usually enamel (paint PF 115), the technical characteristics of which, as you can see, are quite good, is used to cover central heating batteries, windows and doors. It is also used for painting benches, arbours, hozblocks, verandas, etc. It is simply ideal for the finishing of window frames and door frames outside the building. Due to the increased moisture resistance, the film created by this enamel will never go bubbles and will not exfoliate. Another advantage of this paint is its resistance to ultraviolet radiation. Painted surfaces do not fade and do not fade.

Many manufacturers of this tool recommend applying it not only to metal or wood, but also to drywall, brick and concrete.

Mode of application

Thus, very good even has enamel PF 115 characteristics. Application (the composition of this material determines its high adhesive properties), however, it is possible only on previously prepared surfaces. Do not apply this product to dirty or oil-stained products or structural elements of buildings. Exfoliate old paint should be cleaned with a spatula. It is desirable to sand the wooden surface before applying the paint. Usually, for this purpose, nadzhachka 4-5 is used.

Since the wood absorbs the paint very well, it must first be primed with alkyd. You can use for this and the very enamel PF 115, diluted with white spirit (no more than 15% of the mass of the paint). It is also possible to use universal primers. The most suitable for the enamel of this type of primer - when processing wooden surfaces - is linseed oil. It is this tool that advises the manufacturer to do the primary processing. In the event that the surface is prepared correctly, the paint PF 115 will lie on it in a smooth, monophonic, neat layer.

Priming is necessary and metal surfaces. This is necessary to extend the life of the paintwork. Preparation of the surface should be carried out in this case. Pre-metal products are cleaned from rust traces and washed with a soap solution for degreasing. Staining is performed after the surface has dried completely.

Than to put or render

To handle products with PF 115 paint, you can use absolutely any painting tools. Large surface areas are usually stained using a roller. To perform finishing in hard-to-reach places, you can use brushes of different widths. Purify tools with white spirit, xylene, nefrasom or solvent.

Very often enamel PF 115 is applied to the surface by means of a spray gun. In this case, a bit of white spirit must first be added to the paint. Before application - when using any tools - paint should be kept indoors at a temperature of 20 degrees during the day. The can is opened with a screwdriver or knife, the contents are thoroughly mixed. Work on painting is performed with open window pane, in rubber gloves. The alkyd enamels smell when applied not too well.

Paint manufacturers

Many domestic companies produce such a tool as paint PF 115. Manufacturer "Yaroslavl color" produces this LCP in the widest range of colors. The mentioned company delivers on the market enamel PF 115 forty different colors. Quality of the company "Norma", "Boss" and Profilux is also of good quality.

In any case, you should only purchase funds from certified manufacturers. PF 115 paint must comply with GOST 6465-76. Information on this is indicated on the label. To date, for the enamel PF 115 must comply with the standard of at least 50 shades. But most manufacturers of this rule, unfortunately, do not adhere. In most cases, the assortment is represented by paints of 15-30 shades.

Storage conditions

Since the paint PF 115 is a fuel, it is prohibited to place cans with it near an open flame. Store this enamel in rooms at an air temperature of -40 ... +40 gr. Do not let direct sunlight or water get on the cans. Guarantees for enamel PF 115 manufacturers give in 12 months. Of course, this storage period can be valid only if the containers are tightly closed. Otherwise, the enamel will simply dry up.

Those who decided to make inexpensive repairs in the apartment or paint any building in the yard of the house, it is worth thinking about the purchase of such a varnish of paint as the paint PF 115. The technical characteristics of this tool are simply excellent. The price for it, as you could see, is not high. The enamel of this brand is truly a "folk" remedy and is used universally.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.