Metal siding "L-brus": characteristics, installation, manufacturers, customer reviews

Glory to progress. Now we have the opportunity to decorate our house with wooden siding. Rather, metal siding with the kind of tree. What is the difference? The most important advantage of such material as a timber-siding under the tree - there is no need for preventive works such as painting, grinding, impregnation, protection from insects, moisture, mold. In addition, the metal is much more durable and stronger than wood, and there will not be situations typical for wood - siding will not dry out under the scorching sun and will not swell from excessive dampness. The entire care of the metal facade is extremely simple - washing with a sponge with soap or simply removing dust and dirt with a soft brush. Of course, on closer examination it becomes clear that siding "L-cant" is just an imitation of a wooden covering, but nevertheless the building with this siding looks fine. Any frame house can be turned into a kind of elite, made of logs, and it will be much cheaper. The practical advantages of this material will also be considered below.

Facade decoration: buildings and materials that are used for this purpose, their advantages and disadvantages

Now there are two most popular materials used for exterior decoration of buildings - plastic and metal. But the variation with the wooden covering is also good and takes place, therefore, imitators have been created - the block house and the beam. Below is a photo that shows metal siding under a block house, which is no less attractive in price and appearance.

The construction of a house from natural wood is a very complicated matter, requiring a lot of knowledge and practical experience, while the wall covering using the same metal siding "L-cant" is easy, and, in fact, such a thing can do any The owner, who has hard-working hands and free time to carry out these works.

Why does the name of this siding contain the symbol L

The name siding "L-cant" material was received because of its physical characteristics. Siding itself is one-way and two-way. The second option is used for the "L-beam", and its name came from the shape of the bend of the fracture.

"L-beams" - metal siding under the tree, properties

The thickness of the metal sheet used in the manufacture is negligible - from 0.4 to 0.7 millimeters, which makes it light in weight and simplifies the installation process. But in this there is also a negative side - with a point impact, the profile will be deformed and will not return to its former form.

Covering the metal with a protective layer of zinc, as well as a polymer, they end up with a coating ready to serve for a period of fifteen to fifty years without losing their properties, with some amendments to the slowness of the person once or twice for the service.

The protective layer and the service life of the material - the direct dependence of factors

The durability of the service, which will carry the siding "L-cantilever", primarily affects the outer protective layer of the polymer. Polyester film, on the quality and thickness of which they decided to save, thereby selling the lining cheaper, will be able to remain in full condition for up to fifteen years. The minimum acceptable film thickness in this case is 25 μm. Further on the increasing - the higher the quality of the film, the more expensive the skin and the longer the service life. So, polyester 35 microns thick, which gives the siding a matt appearance, will provide you a carefree existence in terms of the need to provide a beautiful appearance for about 20 years. Pural with a thickness of fifty microns is characterized by the preservation of properties for up to thirty years, but the plasistol (also a polyester derivative, so to speak) can withstand the sun, frost and wind for more than forty years.

Another great advantage that siding metal "L-beams" (wood) or the same "timber-house" has - it can be any length. If compared with plastic siding, which has a fixed length, not exceeding four meters, the manufacturer can cut metal panels to any length at the customer's order from half a meter to six. Thus, you will be able to measure the length necessary in your case, and almost without waste, decorate the facade with quality long-lasting material.

The cost of metal siding: what does it depend on?

Prices for siding "L-beams" directly depend on the thickness of the coating with polyester material, and, of course, from the manufacturer. It's clear that brand options will cost more. The cheapest - 290-320 rubles per square meter (gloss 0.5 micron thick) and up to 490 rubles and more per square meter (a plas-tic coating).

What are the main points in the process of mounting the siding

Installation of the siding "L-cant" consists of three main activities. First of all, it is necessary to install a frame, to which the siding itself will be attached in the future. It must be level, so that the final surface is smooth and without kinks. For this, the level of the frame-lathing is regulated by means of brackets, which set the distance between the building wall and the lathing. The second point is the installation of the starting profile, as well as the details that will frame the door and window openings, the corners of the building.

And the final stage is actually fixing the siding panels to the frame. In this case, it is worth remembering an important detail: the slots for fixing the panels are made oval not just. The goal is first of all that when the material is heated in the sun, the material has the opportunity to expand, move slightly, so it's not worth it to fasten firmly. Otherwise, the appearance of convexity, which can deform the fasteners, from which the coating will not be very ideal. For the same reason, at installation leave gaps of 2-3 millimeters on each side.

You can additionally insulate your building by covering the heater with the same "L-beam"

Mounting of metal siding "L-beams" can be accompanied by the laying of a heater. It is most convenient to use for this case mineral wool plates. For this, in the first stage of fastening the crate onto the brackets, these very plates are put on, tightly pressing them against each other at the joints. On top of the heater it is necessary to lay a layer of waterproofing, because minivate with high humidity loses up to 80 percent of its properties. Thermal insulation, together with insulation from moisture and water, is fixed to the wall using dowels of the "umbrella" shape. Then there is already a fastening of the frame taking into account the need for a gap between the siding and the heater. The size of this gap should be about 5-7 centimeters - it will ensure free air circulation in this area and will prevent the accumulation of moisture in the form of condensate.

Reviews of the material from network users

Unfortunately, now it is impossible to find any detailed reports about the "L-bar". Either customers thank for fast delivery, or for her, only slow, scold. Regarding the quality characteristics, it is too early to expect any comments, because the sales through the sites are still gaining popularity on our expanses, and the operational period is up to 50 years, why feedback about the quality or compliance can be found a little later.