The Bergauf Bottom Floor: Species, Characteristics

Modern manufacturers of building mixtures offer customers their products in a wide range. But the company Bergauf was more original and entered the market of construction mixtures with a statement that their products are the most environmentally friendly, has high performance characteristics and is relatively inexpensive. This attracted consumers of many countries, including Russia.

Visiting a specialized store, you can learn more about the line of liquid floors of this company, which are represented by different types of mixtures that have certain characteristics. Some of them are designed to form a rough surface, while others are used to create a finish thin-layer coating.

The main types of flooring from Bergauf

The Bergauf flooring is available for sale in a wide range, among the varieties it is possible to distinguish the following: Boden Inter Gross, Easy Boden, Boden Zement Medium, Boden Turbo, Boden Zement Final, Boden Nivelir. The first variety is a quick-setting quality mixture that can be applied manually or with the help of special equipment. The composition is not shrinkable and is resistant to cracking.

The second of the listed varieties is intended for masters who do not have sufficient knowledge and experience to work with such mixtures. The composition after application quite quickly hardens, and it will be possible to move on it after 8 hours. Among its characteristics should be allocated resistance to the formation of cracks. Boden Zement Medium is made on a cement base, and its application can be carried out with a layer, the thickness of which varies from 5 to 60 millimeters. The composition can be used as a base with a heat-insulating layer. Moving on the coating is permissible after 4 hours.

The Bergauf floor can be applied up to a layer of 100 millimeters, it is a variant of the Boden Turbo. Among other things, the mixture is characterized by low consumption and has a self-leveling function.

On a cement basis, Boden Zement Final is also performed, which can be applied with a layer of up to 10 millimeters. Use the composition is recommended as a finishing base, which creates an ideally smooth floor surface. You can move on it in 6 hours. The final self-leveling mixture is the last of the above varieties, it is resistant to cracking and does not shrink during drying and operation.

Technical characteristics of Bergauf self-leveling floors

The Bergauf floor is now popular with consumers because it is easy to apply and easy to operate. Depending on the goals, you can choose a certain type of mixture, which is recommended for application with different thickness of the layer. In the end, it will be possible to obtain a floor covering that has certain characteristics. For example, Boden Inter Gross has a maximum compressive strength, which reaches 12.5 MPa. Such a characteristic should be expected after 28 days.

It is necessary to prepare such quantity of structure which you can work out for 30 minutes as after this time the mixture loses its qualities. On 1 square meter a layer of 10 millimeters will leave approximately 15 kilograms of dry composition. 7 days after completion of the application, you can fully exploit the surface.

Easy Boden can be applied in a layer from 6 to 60 millimeters, but operation is permissible 8 hours after application. After the same period of time, you can exploit the surface, which was equipped with the composition of the brand Boden Zement Medium. The consumption of the product will remain the same. Boden Nivelir can be applied with a minimum layer of 1 millimeter, while the maximum value is 10 millimeters. The material consumption can be somewhat larger - 18 kilograms per square meter with a layer of 10 millimeters.

Details of the filling floor Boden Inter Gross

If you decide to choose a mixture for the bathroom floor, then you can prefer Boden Inter Gross, which is used in high humidity conditions. The composition can be applied to the base screed, plasterboard, wood, expanded clay, reinforced concrete floor slabs, underfloor heating system or monolithic concrete. After full hardening of the surface, it is possible to equip the finish coat in the form of a parquet board, a laminate, floor tiles, carpet and linoleum. Among the ingredients contains sand, modifying polymer additives and mineral binders.

Preparation of the substrate before application

The above-described mixture for the floor should be applied to a previously prepared base, which is pre-cleaned, degreased and disposed of old flaking coatings. To improve the adhesion properties, the substrate can be coated with a primer of the same manufacturer.

Preparation of the solution

We fill the floor only after you have prepared the mixture. For this, the dry composition is closed by water, the temperature of which can vary from +50 to +25 degrees. Liquid in the volume of 0.31 liters will be needed for 1 kilogram of dry mixture.

With an increase in the mass of the composition to 25 kilograms, it is necessary to use liquid in the volume of 7.5 liters. The solution should be well mixed to a homogeneous mass, after it is left for a few minutes, and then again re-mixed. The "Bergauf" flooring floor, according to the manufacturer, will have high qualities only if all the mixing proportions and the order of mixture preparation are met.

Floor characteristics Bergauf Boden Street

If you are interested in self-leveling industrial floors, you can choose Bergauf Boden Street, which is recommended for application in terraces, garages, cellars, house areas and other rooms where there is often a temperature difference. With this composition, you can create a high-strength frost-resistant floor, which is suitable for use in industrial premises. The mixture is gray, and cement is used as the binder.

Among the ingredients is sand, the maximum fraction of which can reach 2.5 millimeters. Such bulk industrial floors are consumed in an amount of 20 kilograms per square meter, which is true with a layer of 10 millimeters. Apply the prepared composition can be a layer of thickness from 6 to 70 millimeters. After 28 days, the surface will reach a compressive strength in the range of 30 MPa. The composition corresponds to the frost resistance of F50.

Preparation before application Bergauf Boden Street

The Bergauf mixtures described above, which are intended for operation under difficult conditions, should be applied at a temperature ranging from +10 to +25 degrees. In the room should keep the above conditions for 3 days. If the base is low in strength, strong contaminants and high humidity, it is recommended to equip the floating screed using a separating layer in the form of a geotextile or a polyethylene film. This is true in the case where there is no possibility to clean the surface before carrying out the work. The thickness of the application of the floor in this case should be thirty millimeters or more.

If you want to fill such a floor with natural or bulk soil, you must first cut off the top layer of the turf, and then compact the surface with a vibration plate. If the soil has a strain modulus less than 5 MPa, then the floor should not be filled.

Cost

The Berghauf floor, whose price is quite acceptable, is available for sale in a wide range. For example, Bergauf Boden Inter Gross can be purchased by paying 270 rubles. For 20 kilograms. Zement Medium costs 380 rubles. For 25 kilograms, as for the Zement Gross, then it will have to pay 285 rubles. The basic leveler, which is known as Bergauf Base, costs 240 rubles. For 25 kilograms.

Conclusion

We fill the floor only after we make sure that the composition was prepared correctly. Otherwise, all efforts made during the work will be in vain.