Homeliness, Building
Impregnation for wood for interior work. Fireproof, antifouling impregnation: reviews, prices
Impregnation for wood for interior works is a composition that does not form a film on the surface of the material. In its consistency, it must be liquid and well absorbed into the body of the wood to the most impressive depth, which distinguishes it from varnishes and paints.
Features impregnation for wood
Choosing the compounds for processing elements from wood that are used indoors, do not expect that they will protect the surface from ultraviolet radiation. This is due to the fact that there are no strong biocides in such impregnations. However, impregnation for wood for internal work can have its own chemical composition, which determines the purpose.
Purpose impregnation for wood
Impregnation can be designed to protect against decay. The composition of such a bio-protective oil includes ingredients that prevent the appearance of fungus and mold. Wood is also afraid of insects. If there is a possibility that products from this material can be hit by bugs, then it is worth treating them with insecticides. Sometimes it becomes necessary to cover the material, which has already been affected by pests, then there is no way to do only surface treatment. The fireproof impregnation for wood perfectly saves products from ignition, however it is necessary to consider, that such structures are water-soluble. Completely non-combustible tree, of course, will not, but the period until the moment of ignition when exposed to fire will be increased.
If there is a need to reduce the paint coating consumption, which is intended to be used in the subsequent finishing of wood, then it is necessary to choose a primer impregnation with the appropriate purpose. After its application it is possible to use lacquers and glazes intended for wood for painting. After preparation by impregnation, the lacquer will lie more evenly, it will absorb well and does not form spots (this is confirmed by the feedback of many consumers). If you want to paint furniture, then you need to prepare their surface with impregnation without fail. Whereas when it comes to finishing works, for example, on the floor surface, the need for impregnation will be determined by the rules and features of the technological process.
Impregnation with linseed oil
Impregnation of wood linen oil is made if necessary to improve the appearance of the product. This composition is used as an independent decorative coating. After carrying out such treatment, the surface will not only look more aesthetic, but will also serve for a longer period of time. The surface will have the ability to repel dirt and water. In addition, the oil can be tinted in all possible shades.
Reviews say that the described impregnation for wood for interior works allows to achieve a natural shade of the surface. After carrying out the work, you will receive a product with a favorably selected relief and an attractive texture. The base will be protected from mold, fungi, bluish and rot. He will not lose the ability to breathe, but at the same time the product will acquire moisture repellent characteristics. Impregnation will give the product resistance to fading, peeling, drying, cracking. Coverage does not pose a hazard to human health.
Features of use
Impregnation for wood for interior work can be applied in several ways, one of which involves less impressive labor and involves applying two layers. After the first of them is on the surface, it is necessary to leave the base for two days. The product must be dried under the influence of a radiator or sunlight.
Fireproof impregnation for wood or any other, which has a different purpose, should be applied to the prematurely dried surface. In addition, the substrate must first be freed from the old coating. If it is supposed to work with wood that has an oil coating, then it is necessary to first process the sandpaper. Before you begin to apply linseed oil, it must first be boiled twice, which will speed up drying. Do not start using oil without mixing it.
The application should be done with a copious layer, using a brush. Movements should be directed along the fibers. The product should be slightly rubbed, which will ensure good penetration. After a certain time, when the compound is absorbed, but not more than 1 hour later, excess oil should be removed using rags. After the surface of the product is to be polished. Wood can be polished with natural wax, which will give a pleasant shine.
Tools and materials
Work on impregnation should be carried out by preparing some materials and tools, among them:
- Natural wax;
- impregnation;
- brush;
- A skin;
- Rags.
Cost of impregnation
Depending on what objectives you pursue in the processing of wood, you need to choose the impregnation with the appropriate characteristics. The mixture "Pinotex", the price of which varies depending on its destination, is produced in Estonia. The shade in this case can be different, as well as the composition. Choosing a wood protection product that is able to perfectly identify the invoice, you will have to pay about 1400 rubles. But the composition of this manufacturer with antiseptic characteristics costs from 1000 rubles.
If you need impregnation for wood, the price of which is slightly lower, then you can choose the composition of Serbian production. For it it is necessary to pay 281 rubles. The mixture has universal qualities. Impregnation can be glossy, its cost is 383 rubles. Such oil from the Serbian manufacturer can be used as an independent decorative composition. According to consumers' reviews, the impregnation of the brand "Pinotex", whose price is much higher than the analogues from other manufacturers, has excellent qualities, and you can buy oil in different volumes.
If you properly prepare the wood and apply impregnation according to all the rules, then the product will last a long time and will look very attractive.
Similar articles
Trending Now