How is tinted parquet

Parquet is a beautiful, eco-friendly floor covering. And the technology that allows to give it a unique look is the toning of the parquet. About him and will be discussed in this article.

In the modern classification by size and characteristics, the following types of parquet are present:

1. Parquet, laid by the piece. Small wooden plates, lacquered or artistically decorated on one side, and connected with each other by special fastening.

2. Parquet board. This form of parquet is made of piece boards, pre-fastened to each other in shields of various sizes.

3. Parquet board. A set of small glued wooden planks. The design principle was created in the middle of the 20th century.

4. Massive boards. This design resembles a simple wooden floor. Boards of solid wood length of 1.5-2 meters are connected together. It is also important that even with a small damage, you have to change the whole board.

5. Mosaic parquet. Everything is simple here - the parquet is laid in mosaic in the form of a pre-planned drawing, usually it has clear geometric simple lines.

6. The parquet is a palace. So noblely called parquet, which when assembled is laid out in the picture.

Mosaic and palace parquet to avoid mistakes when laying the picture are not collected on the floor, but in workshops, and are stacked with ready-made canvases.

Prices for such products vary greatly, which directly depends on the manufacturer's company and the materials used. For example, coniferous parquet is the cheapest. Often, buying parquet from pine wood, I want it to look like the texture and color of a more expensive exotic tree, for example, from Africa or South America. Toning parquet can come to the aid - inexpensive effective procedure with which help you can get the desired result.

Tinting of parquet is necessary and in the process of its repair, only preliminary it should be otsiklevat. Toning will not take more than 4 days for a room of 30 sq.m.

In the technology of imparting a certain color to the parquet, there are two directions: tinting the parquet with varnish compositions - it presupposes a superficial application and color rendering due to the formed color film; Toning by oil composition - is carried out by impregnation and coloring of wood fibers.

Toning of parquet requires a qualified approach, its surface after the cycle should be extremely flat for a better distribution of the coloring paste. Installation of parquet is made directly on cement or concrete by gluing. For these purposes, a special mastic is needed. Mastic for parquet can be cold and hot. It has adhesive properties, properties of protection against damage, properties of sealant. You can also make mastic in order to rub the parquet in order to prevent shrinkage or deformation. The composition is spread like adhesive, after thickening it resembles rubber, it serves up to 20 years, under different climates it shows its properties in a certain way, in Moscow it is stored in well-ventilated warehouses, for example.