Alarm Starline A91: autostart how to turn on? Car alarm: manual, reviews

Each vehicle owner takes all necessary measures to protect his car from theft, burglary or other unforeseen troubles. Domestic drivers of different brands of cars have long known the alarm system Starline A91. How to enable autorun and use other useful features will help to understand the advice of experts.

Computer support of the system was created on the basis of the latest scientific developments in the field of signal coding. Thanks to this, information is exchanged according to a special type. This approach excludes the possibility of hacking the system. Application for managing two-way communication between the keyfob and the on-board computer makes the operation of the equipment comfortable and simple.

Characteristics of the system

Signaling "Starline A91" has in its system the function of autorun. It is designed for different types of cars. The price of signaling Starline A91 is about 8,5 thousand rubles.

The system has a two-way communication type of the computer and remote control. The signal range is 1800 m on the terrain without obstacles. If there are trees, buildings and other obstacles between the machine and the keyfob, this figure is almost halved.

The encoding follows a dynamic principle. The system notifies the owner of various changes in the state of the car by sound and vibration. The equipment can be installed on a car with a diesel, gasoline, turbocharged engine. The transmission can be any.

terms of Use

According to users and professional auto mechanics, the price of the Starline A91 signaling is quite acceptable. The quality of the equipment is recognized as high, but in order for the system to perform its functions fully, it is necessary to pay special attention to its installation and programming.

Experienced experts claim that the installation of all elements of car alarms should be performed by professional mechanics. Only in a specialized service center the whole process is performed correctly. The signaling in this case is given a guarantee. If the user himself makes the installation of the system, he can make mistakes. This will affect the security qualities.

The encoding of the signal can not be hacked. It is transmitted over a 128-channel radio link. The onboard computer has more than 60 programs. The electrical system must support a voltage of 12V. The equipment operates correctly at an ambient temperature of +85 to -45 ° C. This is a reliable, resistant to unfavorable conditions equipment.

Expert Reviews

To ensure the correct operating conditions of the system, experts recommend that you carefully study the Starline A91 signaling instruction. In this case, all its elements will work seamlessly and reliably. Breakdown of the equipment presented is extremely rare. The operation of the system is recognized as durable and effective.

If necessary, you can change the production program. You can control the settings using the key fobs that come with the package. The first console has a liquid crystal display - it is considered the main one. With its help you can evaluate the state of all machine systems. The second keyfob (optional) does not have a screen, only the buttons control.

The program is fully Russified. It's easy to use the key fob. In addition, you can add 2 more key fobs to the system memory. In total, the computer remembers 4 consoles. With their help, all functions are managed. Signaling Starline A91, reviews about which are exceptionally positive, are recognized as reliable and easy to manage.

Trinket

The Starline A91 Alarm Trigger allows you to configure any program. To do this, it is recommended to use a remote with a screen. However, and with the help of a button device you can control most of the car's functions.

The main keychain has three buttons. If several control panels with a display are attached to the control unit, information about the settings changes will be displayed on the one from which the command was sent to the computer.

To get started, read the Starline A91 signaling manual. This will avoid troubles in the management of its functions. Then the battery is installed in the device (it comes with the equipment). After this, you can perform the necessary settings for the operation of the equipment.

Safety regulations

Before making the Starline A91 signaling settings, you should review the safety rules. They are specified by the equipment manufacturer and clearly stated in the instructions.

To ensure a high radio range, the vehicle must be left in an open area. The review should not cover trees, foreign objects and structures. The machine must be installed on the handbrake. If it has a manual transmission, the transmission is put into neutral position. For the automatic box, set the PARK mode.

When you configure and control the alarm system, the car must be in good working order. It should have a sufficient level of lubrication and fuel. When you turn on the autorun in the immediate vicinity of the car should not be people, animals or foreign objects. Keep the key fobs out of the reach of children. People who are not familiar with the rules for using alarms should not use the remote control.

Remote control buttons

Trinket alarm Starline A91, as already mentioned above, has three buttons. When you press them or select a certain combination, you can set the desired mode of operation of the equipment.

The first button is the inclusion of program commands. To do this, press the button once. If it is held for a while, the motor will start or stop. The protection mode is also activated by the first button. For this, the engine must be switched on. Pressing and holding the first button for 3 seconds will activate the armed mode.

With the second button you can change the position of the cursor on the screen. To do this, press it quickly several times. When the second button is held for a long time, the trunk opens.

The third button also moves the cursor around the keyfob screen. With its help, turn off the warning signals of the timer, alarm clock. When the third button is pressed for a long time, the time indicators are set, as well as the energy-saving mode.

Binding of key rings

The alarm system with the start-up Starline A91 may require you to insert key fobs into the computer's memory. It is recommended to do this when buying a used car on which the system was previously installed. Also, in some cases, the system may stop responding to the console commands. In this case, you will need to bind them.

First you need to stop the motor. Next, using the instructions, we find the button for Valet settings. We press it seven times. The user then turns on the ignition. After that, 7 beeps should sound. This indicates that the system has entered the setup mode. The previous settings are automatically lost.

The third and second buttons of the key fob are simultaneously clamped. If the driver hears a beep, this means that the activation of the console has succeeded. The same technology binds the other key fobs. The interval between settings should not exceed 5 seconds. Then the ignition is switched off. If the procedure is successful, the parking lights will light up 5 times.

Time setting

After a thorough study of the instructions, many drivers may have a question: how to turn on the Starline A91 alarm startup? The fact is that the manual can be very confusing and difficult to perceive. In this case, the recommendations of experienced specialists will help.

Professional mechanics recommend setting the system time before setting up autorun. This procedure is performed in the presence of a key fob with a screen. Time programming takes place according to a simple scheme.

First press the third button on the remote control. The clock symbol flashes on the screen. If you press the first button, the number of hours will decrease. Increase the figure will help the second button. Then the correct minutes are set. The procedure is similar. After setting the time, you can use various additional functions.

Autostart by time

To understand how to enable the Starline A91 autostart, you need to listen to the advice of professional auto mechanics. This is an important function that increases the comfort of driving a vehicle. Using the keyfob, the parameters of this function are set.

It is possible to start the engine from a distance, extend its operation or set it to automatically start the timer. The motor can be switched on at regular intervals. Depending on the operating conditions, the interval can be 2, 3, 4 hours or 24 hours.

To set the start interval for the motor, press and hold the third button. First, the key ring will emit one beep. You can not release the button. Then the second signal will sound. The button needs to be released. By briefly pressing the cursor moves to the corresponding icon resembling a fan. Next, the first button is briefly pressed. After 10 seconds the mode will be activated.

Autostart by temperature

Car alarm Starline A91 can start the engine in temperature. It measures a special sensor. When a certain temperature is reached at the place of its installation, the motor will be started to warm up. The start can take place at a temperature of -25, -10, -18, -5º C. The heating can last 5 or 10 minutes.

Autostart by temperature is activated by pressing the third button. When the second beep sounds, select the third icon in the row. When it is activated, the temperature will appear on the clock. The icon on the display will be dark. This indicates the activation of the autorun mode.

The operating temperature will be as it was programmed by the manufacturer. When the system is connected to a car service, this indicator can be changed. The time and temperature parameters are set by the mechanic, who installs and adjusts the operation of the on-board computer.

Customer Reviews

Car alarm "Starline A91" is recognized as an effective and reliable system among domestic consumers. There is a low level of false positives. Equipment breakdowns are rare. If the Starline A91 alarm does not work, the cause may be incorrect installation or configuration of the system.

False activation of the siren can be caused by the high sensitivity of the sensor. This parameter must be properly configured. Sometimes the system unit does not perceive the signals of the key fobs, in this case they need to be tied to the on-board computer once more.

Having figured out what the Starline A91 alarm system is like, how to enable autorun and configure the basic functions, each user will be able to fully operate the presented system.