Roller blinds with their own hands - step by step instructions

Traditional curtains are not so popular in the home interior. Now it has become fashionable to use roller blinds as windows decor . Such their popularity is fully justified, as these curtains are extremely simple to handle and care. Do roller blinds with their own hands is not at all difficult, because they are a fabric or paper sheet that rolls into a roll. It is important only to correctly choose the design of such curtains, so that they harmoniously fit into the home interior.

Benefits

Roller blinds, manufactured by themselves, have many undeniable advantages. They not only perfectly fit into any interior, but also excellently protect from sunlight. You can choose from the rich assortment presented on the market, the model that will completely suit you. However, you can make roller blinds with your own hands, choosing a cloth and even paper as a cloth.

If you want to achieve maximum opacity, choose a more dense material that will prevent the sun from penetrating into the room. In addition, the air layer, created between the roller blind and the window, will save heat in the winter.

Ways of fastening

There are several methods of fastening the mechanisms of the roller blind. You can install them inside the window slope from above, above the frame, on the wall or on the ceiling. Everything depends only on individual preferences. Suppose, if you often open a window to ventilate a room, attach the mechanism to the frame. Anyone can try to do roller blinds with their own hands. A photo of the curtain data is presented in our article.

Mounting options

The design of such curtains can be open or closed. The first option is the cheapest and easiest. The principle of operation is as follows: the web is loosely wound on the shaft, and in the straightened form it is held by a rail attached from below. In the second variant, guides are additionally used, which protect the structure from possible deformation and ensure the closest fitting of the curtain to the window.

There are also two ways to install a roller blind on a window:

• With the help of glue or scotch tape;
• With the help of self-tapping screws.

If you decide to make a roller blind with your own hands, use the first option, because it is the most simple and suitable for installation of structures that have a low weight.

The remains of the wallpaper: everything is in order!

Many accessories for decorating the interior are quite easy to make with your own hands. Roller blinds refer specifically to such structures. I must say that it is very easy to make such curtains, you do not need to have any special skills for this. Time to make such a roller blind will go a little, and the result will be delicious!

Decorate the windows with paper rolls, which will look very creative in any apartment. If you still have wallpaper from the past repair, you can make such a curtain just in the evening. Do roller blinds with your own hands made of paper, because it's very simple.

Step number 1. First, measure the width and height of the glass.

Step 2. Draw a rectangle on the wallpaper. Its width will be equal to the width of the glass, and the length - by ¼ more than the length of the glass.

Step 3. Cut the rectangle and fold the accordion, forming folds no more than five centimeters.

Step # 4. By piercing holes through the entire middle of the paper web. Insert the cord. Straighten the canvas, fixing the garter knot in the upper part of the future curtains.

Step No. 5. We also glue the building adhesive tape (double-sided) and attach it to the frame.

Step No. 6. We make the five lower folds "peacock tail". For this, we glue them together with an adhesive tape on the inside.

Step number 7. Output the end of the cord inside out and insert the lock.

So our blinds are ready with their own hands from the wallpaper! The photo below will tell you how to do it right.

We train roller blinds with a barbell

Now we'll make a curtain of fabric. Prepare the following tools:

• Cut fabric;
• A pair of wooden bars;
• cord;
• Five rings-screws;
• Three hooks-screws;
• scissors.

How to do?

First, cut and sew the fabric in such a way that the bag will turn out. It will need to be unscrewed. Sew the remaining edge and iron it. For the strips you need to form some pockets. Do it this way: bend the edges of the roller blinds from the top to 3 cm, and from the bottom - to 1.5 cm. Stitch. In these pockets, insert the slats. Carefully screw in a pair of rings-screws on top of the bar and from the underside. Do this manipulation in the top bar. Step back from one ring from the front side 5 cm to the edge and screw in another ring.

Cut two cords. The length of one should be 3 curtain lengths, and the second should be longer than the first one by ½ the length of the curtain. Tie the cords on the rings. The one that is longer, attach to a separately screwed screw. Route the strings along the wrong side, place them behind the front side and once more pass through the rings. Then thread them through the common loop that is on the side, and tie it.

The original roller blind is ready, it only remains attached to the window. Screw the hooks into the frame 2 so that they are in front of the upper rings. Hang the design. The third hook is screwed from the side into the window frame. On it you will wind the cord, which will help to hold tightly and reliably to the roller.

Step-by-step manufacture of curtains with a lower shaft

Stage No. 1. Treat the two-sided fabric by bending the edges.

Step 2. Form the pocket from the bottom. He will serve as a weighting and shaft.

Step number 3. Stapler attach to the upper bar Velcro. Attach the second part of the roller blind at the top.

Step 4. Join the canvas with the bar and wrap it.

Stage number 5. Cut two cords. The length of each of them should be 2 lengths of curtains and another 20 cm.

Stage number 6. Throw the ties through the bar, which is located at the top, and attach to it a stapler.

A similar roller will roll down and be straightened manually. You can easily adjust the height of the knotted cords. Do not forget to additionally fix the bar with screws. If you set a goal, it will be easy to make roller blinds with your own hands. A step-by-step instruction will help you.

Redoing the shop blinds

Sometimes it is quite difficult to choose a roller blind for a particular interior design. If, however, you suddenly had such a problem, you can absolutely calmly purchase a ready-made design in the store and make it up to your own requests. How to build roller blinds with your own hands? The master class will help you in your implementation.

We will need the following tools and materials:

• Roller blind;
• Medium-density fabric (cotton, twill or canvas);
• Polyester thread;
• cutter;
• scissors;
• Scotch tape bilateral;
• roulette;
• sewing machine;
• iron.

Master Class

For each finished roller blind there is an instruction for fixing the attachment, so attach the mechanisms according to the recommendations. Remove the vinyl sheet from the cylinder and remove the weighting agent. Now measure the inside of the roll between the clamps. To this result, add 3 cm. Label this value with the letter A. Measure the distance from the window sill to the attachment mechanisms. Add 25 cm. This is the value of B. Take a piece of cloth and cut it. Its width is the value of A, the length is B. Cut off the sides of the cut by 1.5 cm and iron it. Stitch the seams side by side. From the lower edge, first lay a 1.5 centimeter, iron and lay another 5 cm. Stroke next. You have a pocket in which you put a weighting agent. Attach the finished curtain to the roll with the help of Scotch tape. Fix the fabric and twist it. Set the shade and insert the weighting agent.

How to care?

Everybody knows that dust accumulates quickly on such curtains. That's why they need to be constantly monitored and kept clean. Usually roller blinds are periodically vacuumed using a nozzle for furniture. Remove the canvas from the window is not worth it. It simply needs to be closed and cleaned with a vacuum cleaner. The same manipulations should be made from the wrong side. If you have roller blinds made of plastic, you can calmly wash them with water and add detergent. Perhaps, it will be more effective to clean the blinds with a cloth soaked in alcohol. Just wrap it with a rubber spatula and start the treatment. After completing the work, treat the dry cloth curtains with antistatic agent.

Just do not wash water with curtains. Of course, you will be offended to ruin the roller blinds, made with your own hands made of wallpaper. Clean them with a special paste designed for paper sheets. You can also use a stain remover that has a gentle action. Be sure to wear rubber gloves when working with this kind of tools.