Cages for broilers themselves: drawings, photos and sizes

The conditions in which broiler chickens should be kept are completely different from those in which laying hens are kept. To get a huge number of eggs, you need heat, a secluded place and darkness. But the cages for broilers should be very light and spacious enough.

Advantages of cellular content

Many poultry farmers know that broilers can be grown by several methods: ordinary floor and cell. On large farms, hens are usually kept in spacious rooms on removable bedding. It is replaced after each batch.

But at home, this kind of broiler farming is unacceptable. Therefore, many owners are thinking about how to build cages for broilers with their own hands. Drawings of such structures are understandable even to beginning poultry farmers. Cellular cultivation in this case allows to achieve certain successes. In small light houses, chickens gain weight very quickly. In addition , the cell allows you to keep birds clean, and also save on the stern. It is worth noting that the increase in meat in chickens belonging to the first category is almost 95%.

What should the cell be?

Before you start building small houses, it is worthwhile to figure out what the cages for broilers should be. First of all, they should be convenient in terms of service. Recently, large enterprises use fully automated cells. These houses are equipped with a feed system and, of course, water. In addition, they have a more functional form of the battery. It should be noted that it is not difficult to make such cages for broilers by oneself. After all, this design allows you to save on the stern, litter and space. At the moment there are several types of such cells: KK-10 for ten heads, KK-20 for 20 heads and KK-30 for 30 broilers.

Make such houses mostly from the grid. This allows you to constantly monitor the chicks. In this case, birds have free access to water and feed. When building cells, it is worth considering that broilers do not need a lot of space. In winter it is better to keep up to 10 heads on one square meter.

Some recommendations for building cells

When creating a cage for broilers with their own hands, it is worth remembering that this species of birds should be kept in not very spacious houses. After all, the main task is to increase meat, as well as rapid growth. Therefore housing for broilers should be light and small.

In addition, the cell should be made more durable, as in time the number of birds per square meter increases. If you are engaged in the self-manufacturing of a mesh, then the design for welding should be strengthened with additional points. When constructing a cage for layers, you can use a floorboard with a thickness of 1.5 centimeters. For broilers, this option is not suitable. Floor construction is better done from boards in the thickness of 2 centimeters. It is worth remembering that with sufficient care and good nutrition, the weight of one bird can be more than five kilograms. Naturally, the load on the floor increases with time.

As for the grid, it is better to take the product with sufficiently large cells (cell size 4-7 centimeters). In addition, their cost is much lower than the cost of the lattice, designed for the arrangement of the henhouse for laying hens.

The roof is best made of materials that do not allow moisture to pass through. At the same time, the roof must be attached to the structure in a qualitative way.

Manufacturing of houses for poultry

How to build cages for broilers with your own hands. Drawings in this case greatly facilitate the work. They immediately show how much material is needed. So, for the cell you need:

1. Screws.
2. Grid.
3. Wooden slats.
4. Plates made of metal.
5. Plywood.

How to build

By itself, the process of making cages for broilers is not that complicated. To begin with, you need to make 6 racks 165 centimeters long. At the same time, they should all be 7 by 2 centimeters in size. After that, all racks should be connected to the frame. To do this, you need 6 parts with a cross section of 3 by 2 cm, three parts - 10 by 2 cm and 2 parts - 5 by 2 cm. Each length of the rake should be 1.4 meters.

To make the side walls, it is better to use plywood sheets. They should be 57.5 by 30.5 centimeters. There are several such sheets.

As for metal plates, with their help it is possible to easily equip special pallets to remove manure and other debris. Their dimensions: length - 30.5 cm, width - 20 cm, height - 67 cm.

The roof of such a cell should be 70 by 140.7 centimeters. Open the sides of the product should be made mesh. This will create a light cage for broilers. To make it more convenient to move such a house, you can install several wheels on its bottom.

As you can see, you can easily and quickly make cages for broilers yourself. The photo of the finished products allows you to clearly imagine what the house should be for this kind of poultry.

Of course, do not forget about the arrangement of cells. A drinking bowl is better to install a nipple. This will reduce the cost of litter and keep the water clean for several days. As for the feeder, it should be mounted on brackets. In principle, you can make cages for broilers yourself. The main thing is to observe all the rules and some recommendations.

What you need to install in a cage

If you have made cages for broilers with your own hands, then you can start their equipment with various useful adaptations. First of all, you should think about drinking water. For their manufacture, you can use ordinary plastic bottles, equipped with a nipple. In this case, they should be slightly below the head of broilers. Otherwise, they will be uncomfortable to drink.

For the preparation of drinkers it is better to use a capacity of at least five liters. This will not worry about the presence of water in birds for several days. In addition, in the place where the shelf is fixed, it is necessary to ensure a more reliable fastening of the entire structure. After all, as a result of constant loads, the grid can be deformed.

As for feeding troughs, they should be installed so that only ¼ of the inside of the cage is located, and the rest is outside. This will allow them to be easily cleaned and filled with fresh food.

To produce feeders is best of plastic pipes, the diameter of which is 30 centimeters. Anchorages should be done along the entire length.

That's all, homemade cages for broilers are ready.