Palma from a plastic bottle with your own hands is easy and simple

A palm from a plastic bottle, created by oneself, a simple and at the same time elegant decoration for a playground and an infield. To tasks of increased complexity, its construction can not be attributed in any case. Each novice master can deal with this matter. To do this, just follow the instructions below, and you will get it right.

Prepare in advance

Palma from a plastic bottle with your own hands is made with the help of the following materials, devices and tools:

• Knife clerical.
• Scissors.
• A set of plastic containers of various sizes and colors (bottles with a volume of 1.5 and a maximum of 2 liters are best suited).
• Wire.
• Pipe 1/4 (suitable for both metal and metal-plastic).
• Pliers.
• Side cutters.
• Marker.
• Ruler.
• A sledgehammer or a hammer.
• Awl.
• Lekalo (needed at the stage of cutting out the green leaves of the tree).
• Electric drill and set of drills for metal.

All this is better to prepare in advance, that a beautiful palm from a plastic bottle, made with your own hands, start flaunting as quickly as possible on your backyard or playground where your kids play.

Preparatory work

At the first stage, we make palm leaves from plastic bottles. For their production we will need a template, a marker, a stationery knife, an awl and plastic green containers (in extreme cases, you can use a container and a different color, but then you will need to cover them with green paint). Further we make marking on the container surface with the use of a marker and patterns (if you want, you can make a template from paper and then use it for these purposes). On the marked marking, we cut out the leaves. To further fix the resulting parts on the trunk of the tree, make holes with an awl. At the next stage we proceed to the trunk. Here we need a similar set, only with the difference that brown containers (or another color, but at the end they will have to be opened with brown paint) will be needed. All bottles, except one, are cut off the bottom. In the lid an opening of this diameter is made, So that the pipe passed. For these purposes, a drill and a set of drill bits for metal are used. In a single whole bottle, an awl is prepared for the holes for fastening the leaves.

Collect the palm

Now proceed directly to the creation of the craft. First you need to use a hammer or a sledgehammer to hammer the pipe into the soil. It should be very firmly installed, in order to exclude the fall of the tree in the future. Bottles with a cut-off bottom are put on it. The latter should be put on a whole container. Then a green part of the tree is attached to it with the help of wire, pliers and side cutters - leaves. To avoid possible injuries, the ends of the wire are wrapped with tape or tape. Everything, our palm from a plastic bottle with our own hands is made. As can be seen from all the above, there is nothing difficult to create such an article. You just need the time and desire. With the rest of the problems should not arise.

Conclusion

This article describes the algorithm by which a palm can be made from plastic bottles. The scheme is simple enough, and each master will cope with it regardless of the level of his preparation. As a result of the work carried out, an excellent decoration for children or an infield will be obtained.