Homeliness, Building
How to pull a net-netting on a fence: a step-by-step description, recommendations and feedback
If it is necessary to install the fence, the owners of private areas think about the question of how to make an inexpensive and reliable fence. For this purpose, the mesh-netting is perfect. Anyone can do this installation by installing a minimal set of tools.
Observing the installation technology and choosing the right material, you can make a fence that will last about 20 years. It is important to ask what types of mesh can be found today. The master needs to study the technology in detail to avoid mistakes.
Varieties of mesh-rabitsy
Before pulling the mesh-netting on the fence, it is important to understand its varieties. This material is made of galvanized and black wire, so the quality of the products may vary. The material of the black wire is quite cheap, but it is short-lived and eventually becomes rusty, which can happen after the first rain or fog, whereas in 4 years the material can become completely useless.
Extend the life of galvanized steel can, covering it with liquid rubber or paint. It is necessary to do this before the installation of the canvas, and after that it is necessary to update the protective layer from time to time. Before pulling the mesh-netting on the fence, you should also learn that the material made of non-galvanized steel is not afraid of corrosion, so it's ready to last longer. This grid is a little more expensive, but does not need any processing.
Fences made of galvanized steel look attractive and neat. Classify the grid is also possible by the size of the cells, the height of the roll and the thickness of the wire. As for the cells, they can have dimensions that range from 10 to 65 mm, while the wire diameter varies from 1 to 5 mm. The height of the roll can be from 0,8 to 2 m. However, the most popular material is the one whose height is 1.5 m. The standard length of the roll is 10 m. You can purchase rolls of 20 m under the order. The material costs more than the smaller mesh , Because it increases the consumption of raw materials.
How to draw a grid: a step-by-step description. Welding of hooks to supports
If you are thinking about the question of how to pull the net-mesh to the fence, then it is necessary to start work with the welding of hooks to the supports. When the concrete is compacted, what happens in about a week, you can continue to work. The grid can be fixed with clamps or wire, but hooks are most convenient.
On sale you can find profile pipes with welded hooks, but if you have a welding machine available, it will be cheaper to manufacture them yourself. To do this, use steel rod pieces, nails, screws or thick wire. Anything that can be welded to the pipe and bent is suitable. Three hooks will need to be installed on a 2 m high support. The distance from the ground of the first hook should be 15 cm. The other will be placed with an indent from the top at 10 cm, while the third one is in the center.
Grid fixing
If you are faced with the task of how to pull the net-mesh to the fence, then the next step should be to fix it. To do this, the roll is installed near the corner support, there it is necessary to unwind the material and put on the hooks of the cell. At the same time, the edge of the grid must be securely fixed. After that, the armature is attached to the pipe and welded. When the roll is tensioned, the mesh will not bend.
When its end is fixed, the roll can be transferred to the next support, and then gently unwrap it. With a ledge from the junction of the mesh with the pipe 15 cm into the mesh is threaded a steel rod. This time it is not necessary to weld it. It will allow to stretch the grid evenly.
As soon as it is put on the hook, the rod is removed, and the roll is unwound for one more span, now you need to take the reinforcement again. If you are pondering the question of how to properly pull the grid-mantle to the fence, then the above scheme should be used until you reach the end of the fence. In order to connect two webs, you should use a wire from the extreme vertical row.
How to avoid sagging the canvas
Even if the grid is able to pull well, it may hang over time. Therefore, during the installation phase, it is necessary to take care of the additional fixation of the slab between the supports. For this, 6 mm wire and a welding machine are used. If you are also one of those who thought about the problem of how to stretch the net-netting with your own hands, then it is necessary to pass the wire into the second or third rows of cells horizontally. The element should be located along the entire fence.
In those places where the rabitsa will be adjacent to the poles, the wire must be welded. The lower edge of the rabitsa is strengthened in the same way. At the final stage, the hooks must be folded. The fabric of the fence should be tightly fixed on the supports, while the grid will not sag and sag.
The final stage
Once the fence is ready, you can complete the finishing touches. To do this, plastic plugs are put on the pipes, the poles are painted, and the upper antennae of the grid twists into 2 turns and bends down. On this we can assume that the installation of the fence is completed.
The device of a fence from rabitsa
If you are interested in a fence pick-up device, then you need to know that in the first stage you need to equip the sections. For this purpose, the poles are mounted. You can do this after cleaning the area of vegetation. The area is leveled, the master should determine the location of the outriggers. Pipes for them should have a larger cross section than intermediate pipes. It is necessary to deepen them more.
For intermediate supports, a square pipe with a side of 40 mm is usually used. But for corner supports it is better to take a pipe, the cross section of which is equal to 60 x 40 mm. In addition, they should be longer by 20 cm. If you are faced with the task of how to properly install a fence from the mesh-netting, you should clean the pipes of oil stains and scale, primed them and left to dry. Using a hand drill in the ground holes are made, a pillow of sand is poured onto the bottom and compacts well. Next, profile tubes are inserted, which should be set according to the level.
The space in the pits is filled with crushed stone, which must first be mixed with the soil. Filling should be carried out at 2/3 of the depth. The remaining space is poured with concrete mortar. Vertical poles at this stage should be checked again and aligned if necessary. Once the solution has solidified, the spacers can be removed and proceed to the markings for the intermediate posts.
Installation of intermediate supports
Between the corner posts, pull the rope, 15 cm from the ground. The line is divided into equal segments, which will correspond to the width of the span. The optimal width for the fence is 2.5 m. If this parameter is increased, the grid will hang.
How is the correct installation, how to stretch the net-rabitsu, you can find out if you get acquainted with the article. In place of pegs that are installed in the marking phase, you should drill the holes for the intermediate pillars and prepare a pillow for them in the manner described above. In order to be more comfortable to control the upper edge of the supports, you can pull a rope between the last posts. Now you need to install the pipes, align them vertically and height, pour the soil and rubble, and top the concrete and level the surface.
Conclusion
The fence from the mesh-netting in the suburban area will be the most profitable solution. Such a fence will not obscure cultivated plants. In addition, climbing over such a fence is quite difficult, which will allow you to prevent the penetration of unauthorized persons into the territory. Use of such fences can also be used for zoning on the site. The installation can be done independently, which will save you money.
Similar articles
Trending Now