How to properly tape a tape? Tips and Tricks

When performing repair work in the water supply system, there are problems with water leakage. This is due to the fact that the connected parts can not fit tightly against each other, since they have a small tolerance in size. Due to this tolerance, the parts can be freely twisted and twisted (that is, replaced by separate nodes in the event of a breakdown). To avoid water leakage, use tape tape, which came to replace the usual pakle. Also worth noting is one feature, which has a fum-tape - the price and availability of purchase in almost any store of household and construction products.

Description and characteristics

The tape is made of high quality fluoroplastic, which provides a long service life. It also has heat-resistant characteristics, which allows it to be used in the repair of heating or hot water systems. The tape for water can withstand the negative effects of liquid, as it is made of a material that is completely neutral to water, that is, does not react, does not rot, does not rust, etc.

Application area

The tape is widely used for the creation of water supply systems, as well as when replacing individual water pipe units or repairing them. Using this tape allows you to quickly replace a particular node. Plumbers have long appreciated the convenience and ease of use of this tape. After all, learn and learn how to properly tape the tape, it's easy, it's enough to try and figure out how to do it better so that there are no water leaks.

Feeding sequence of tape fum

For those who want to learn how to properly tape the tape, there is a certain algorithm of action, the implementation of which will ensure a reliable connection:

• First of all, you need to choose the right width and thickness of the tape. For example, if the parts of the water pipe have significant wear, then the tape should be selected with a larger thickness, up to 0.2 mm.
• Next, you need to thoroughly clean the parts to be joined, so that there are no leftovers from the previous tapes, pakli, paint, rust remnants, etc.
• Then, it is necessary to carefully tape the tape on the part with a smaller diameter, that is, the one that will be screwed (or which will wind the second element of the threaded connection).
• Winding the tape should be strictly clockwise, because by our standards, almost all threaded connections (in plumbing in general all) have the right thread. This is done so that when twisting the joining details, the tape does not fold, but as it continues the winding together with the part. To understand how to properly tape a tape is easy enough. If you want, you can learn this in 30 minutes.

Using these basic rules, you will easily understand how to properly tape a tape with threaded connections of a water pipe. It is worth paying special attention to that the effort of twisting should be selected carefully. Especially this applies to parts of the water pipe made of bronze and other soft metals and alloys. The main thing is not to overtake! On how to properly tape the tape, the final result depends. The main parameter here is the repairman's skill, but for beginners it's enough to tighten without applying any special efforts. After starting the water, it is necessary to check the connection and, if necessary, tighten. If the water is still leaking, and pulling further is risky, then you need to close the water, unscrew the connection and add a couple of turns of the tape.

Which ribbon to choose?

So, how to properly tape the tape with a thread, we already know. Now you need to decide on a specific choice of a tape to repair your bathroom. The market presents a large number of tapes from different manufacturers. Also, it can differ in the width of the strip and the length of the coil. How to understand what kind of fum-tape you really need? The price depends on its quantity, so if you need minor repairs - take a small hank with a minimum thickness, the cost of which starts from 11 rubles. If you make a plumbing in an apartment from scratch, then you need to take a lot.

Also, the choice of a ribbon tape depends on the parts to be joined and their diameters. The larger the diameter, the more layers you need to wind up, respectively, the flow rate will increase. If after repair, the tape-tape will remain - it's okay. It does not deteriorate with long storage and will always be at your fingertips in the event of water pipe repair work.