HomelinessDo it yourself

Drip irrigation with your own hands from improvised materials. How to make a watering of the garden in the dacha with their own hands?

Quite often summer residents face the problem of lack or excess of moisture, which irrigates the plants. If we talk about the hottest season of the season, then the plants should be watered daily, it is desirable to perform such manipulations in the evening. However, it is not always possible to provide such an opportunity. In this case, it is recommended to equip drip irrigation with your own hands from improvised materials. This will help solve the problems voiced. Such a system not only saves time, but also forces, reducing the flow of water and providing a sufficient amount of moisture that will irrigate the plants.

Design features of drip irrigation

Before you start the work, you need to familiarize yourself with the technological features and prepare all the materials and tools. It is also important to plan the area for irrigation. The container with water should be located at a high distance from the ground surface, so that the liquid flows through the pipeline.

The main pipeline will connect to the tank, while water will flow from it through the tee. For the laying of the main pipeline, a plastic pipe with a diameter of 5 cm is required. A filter, tees intended for connecting the hoses, as well as fittings provided with cranes will be needed.

The master must take care of the presence of tape or irrigation hose. If drip irrigation with its own hands is made up of improvised materials, it is important to think about the volume of the water tank. This parameter depends on the area of the territory.

It is recommended to protect the container from ultraviolet light, otherwise water can be a favorable environment for the emergence and reproduction of algae that can clog the hoses.

Do not use as a tank a translucent plastic container, since it is most susceptible to the appearance of green algae. By equipping drip irrigation with your own hands from improvised materials, you should prepare plastic pipes, which will act as a watering hose. Such products are also suitable for the main pipeline. They have many advantages, including ease of installation, elimination of corrosion, plasticity and low cost.

Recommendation of the master

If you intend to use fertilizers for irrigation of cultivated plants, you should stock up with water-soluble compounds that are free of fine particles. If you do not take into account this rule, the irrigation system may become clogged.

Arrangement of drip irrigation system

If you will be equipped with drip irrigation with your own hands from improvised materials, it is first necessary to prepare the territory by marking it. After that you can start the installation work. The master must cut off the hose for mounting the main pipeline. By means of an adapter and a crane, the pipe is connected to the water supply system. The tap to the tank with water should be attached slightly above the level of the bottom so that debris or sediment can not get into the hose. At the end, the pipe must be closed with a crane.

If a faucet is used as a plug, this will allow the pipeline to be flushed if necessary. Between the tank with water and the central pipeline, you need to install a filter, it will hold the debris and sediment, preventing clogging.

Features of work

If you need drip irrigation, it is easy to equip such a system from improvised materials. The central hose must be drawn along the length of the section, perpendicular to the plantings. In the hose holes are made and by means of taps with gaskets watering tapes are installed for each bed. Tapes should be placed along the beds along the length.

After you make the connection, the elements are supplied with plugs at the ends. To do this, the most often prepared pieces of tape, whose diameter is 1 cm, are most often used. The tape should be bent at the end, after which the prepared pieces should be put on. Rings help fix the tape along the entire length of the system. If you make such a drip irrigation in the dacha with your own hands, it will allow watering tomatoes, cucumbers that are located in the greenhouse, or cultivated plants that are in the open air.

Alternative version of the drip irrigation system

To equip the described system, traditional plastic bottles can also be used. But this approach is optimal only for oversized territories. Such a system is capable of providing dosed irrigation of plants for 4 days. This technology, as a rule, resorts to summer residents, who have the opportunity to take care of the garden only on weekends. You can choose between two options. For installation, bottles should be prepared, the volume of which varies from 1.5 to 2.5 liters.

The first way

We continue to consider how to make drip irrigation with your own hands. The neck of the container should be closed with a lid, and on the sides make a few holes, their number will depend on the structure of the ground. If the soil is sandy, then there will be enough three holes, if the soil is clayey, then you should make 4 holes. Bottles are dug into the ground, while it should be 15 cm deep. The container is placed between the plantings with the neck up. Water will pour through the neck, holes will moisten the roots. It is recommended to make a hole in the lid, which will exclude the tightening of the container after water leakage.

The second way

Drip irrigation of the garden with their own hands can be arranged and the second technology, which is most suitable for plants that love warm water. Bottles should be suspended above the ground by means of wooden supports or wire. To do this, you need to dig up the poles along the edges of the bed, the first of which will be fixed bottles. At the base of the container, an opening is made, and then, with the help of a wire, the bottles are suspended, while the neck must be turned downward. Irrigation is realized through the holes in the lid, they can be located on the sides of the neck. If plants need a lot of water, then you can use five-liter bottles, in which to do one hole.

Conclusion

Homemade drip irrigation with their own hands is easy enough to equip. At the same time, you will not make a lot of effort, and money will not be needed at all. It is very easy to organize the process yourself, and among the advantages of the system, you can also highlight efficiency. Irrigation will be done in small portions, so the soil in sufficient quantity will gradually become impregnated with moisture. This device is able to facilitate work and reduce the time spent on harvesting. Many fans of working on the territory of the infield are choosing just drip irrigation, which has become a successful replacement for all other systems.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.