HomelinessDo it yourself

Household trolleys for the transport of goods by hand

Staying in the garden is always accompanied by a lot of cases. Sometimes it is necessary to transfer something heavy from one place to another, and it is not always possible to do it on your own. In order to make a stay in a suburban area a pleasure, you need to abandon the dragging of weights in your own hands. In this, as a rule, help trolleys for the transport of goods. With their own hands, such designs are made by house masters quite often. In this case, you can do with improvised materials, getting a product that will become an assistant for the period of harvesting, construction and other works. To carry out manipulation will not need special skills or special materials, as well as tools.

Making a wooden wheelbarrow

Of course, you can buy in the store trolleys for the transport of goods. By their own hands, however, such constructions will be made simply, and money for this is not needed at all. When making a wooden object, you need to choose hard woods, among them you can select maple, birch or oak. Such material will last for a long time, and also will show reliability in operation. It is preferable to refuse from coniferous species.

Work on the mounting frame

In a suburban farm, trolleys for the transport of goods are simply irreplaceable. With their own hands, such designs are made by specialists and home-made craftsmen often. Using planed planks, it will be possible to assemble a box that will form the basis of the product. Dimensions should be chosen, taking into account the physical characteristics of the one who will most often use the wheelbarrow. It is important to keep the proportions. In the example, the width of the box will be 46 cm, while the length is equivalent to 56 cm.

Similar trolleys for cargo transportation by their own hands are manufactured using a certain technology, which involves the implementation of several stages. The wheel and the box are fixed to the mounting frame, which acts as the main support. For its formation, it is necessary to prepare two bars, the thickness of which can vary from 3 to 5 cm. The length of each of them should be equal to 120 cm. These bars should also be used for handles. For the ends it will be convenient to hold to move the structure across the site.

Production features

When a two-wheeled trolley is manufactured by one's own hands, at the initial stage the bars should be laid on a flat surface, connecting the ends to each other. The opposite ends should be moved apart, which will be equal to the width of the shoulders of the master. On the connecting ends at the top, you should fix the bar of a less impressive diameter. It must be drawn with a marker and a pencil in such a way that parallel lines are left on the bars of the frame. Thus, it will be possible to mark out a place where in the future the wheel will be strengthened. On the planned lines of bars should be made to cut with a circular saw or a hacksaw.

Work on the wheel

When a manual trolley is used to transport goods by one's own hands, the next step is to manufacture the wheel. It will have a diameter of 28 cm, and also be made of wood. To do this, prepare well planed boards, the number of which should be equal to 6. Their size is equivalent to 30x1x2 cm. The workpiece data must be glued into a square, using the PVA glue. In this state, the elements are held under the press for 24 hours, this effect on the workpiece is necessary until the adhesive dries completely. On the surface of the square, you should mark the circle. The future wheel should be additionally fixed using wood screws. Given the outer part of the marking, it is necessary to drill the wheel. The next step is to treat the rough surface of the rim with a rasp.

Wheel and frame installation

A homemade trolley for the transport of goods in this case will have one wheel. The next step is to return to the mounting frame. Two bars should be joined together by means of a spacer. It is installed in such a way that you can put the wheel, which is located between the front ends of the bars. In this case, we are talking about elements that are cut from the inside. The wheel will have a width of 6 cm, and between the ends of the bars should be a distance equivalent to 9 cm. Given these conditions, it is necessary to determine the dimensions of the spacer. Its ends should be sawed and attached to the bar with the help of self-tapping screws. When a trolley for the transport of small loads is manufactured, the wheel must be locked using metal studs that are threaded. The length of the latter can vary from 150 to 200 millimeters. This assembly requires four washers and four nuts. At the ends of the bars should drill a hole to install the stud. In the central part of the wooden wheel, you need to make a hole, the diameter of which will be greater than the corresponding parameter characteristic of the hairpin.

Nuances of works

You can make a trolley for the carriage of goods three-wheeled. It is necessary to be guided by the same technology, but in this case the design should be stripped of supports. One end of the hairpin should be threaded into the hole located on one of the bars. Next, the washer is installed on the pin, and then the nut is attached. Next is the wheel, and then another nut and washer. The hairpin should be threaded through the second bar. The wheel should be fixed from the outside of the bars by means of nuts and washers. The stud is rigidly fixed on the bars, so tightening the fastener should be done using two wrenches.

Assembling the finished product

If you are using such a technology for a truck for the transport of goods with your own hands, you can consider the photo of the construction in the article. On the inverted box, you must install the mounting frame, which is equipped with a wheel. The latter should not touch the box. The position of the frame should be noted on the body with a pencil. Now the master makes two wedges for the entire length of the box. Their thickness should be equal to 5 centimeters, while the width - 10 cm. They are laid on the line and fixed to the bottom of the box with the help of self-tapping screws. Perform these work on the reverse side of the structure. With the help of all the same screws, the frame with the wheel is strengthened, this approach will be the most constructive.

Final work

If a trolley is to be manufactured for the transport of goods by hand, the drawings should be considered well in advance. The staple supports are made in such a way that the wheelbarrow is convenient for carrying out work. Their length should be matched so that the installation of the box assumes a parallel arrangement of the latter with respect to the ground. Rigid connection of racks will guarantee a bar-spacer. It should be secured to the cart. A folding trolley for the transport of goods will be obtained if the subcortex is made on ordinary furniture canopies.

How to extend the life of the structure?

In order for the household wheelbarrow to last as long as possible, after manufacture or before assembly, its elements must first be sanded, free of burrs, and then covered with linseed oil. You can use weatherproof paint, which will allow to leave products outdoors all year round. This is especially true in the event that there is no premises for storage of inventory in the suburban area.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.