Goose mans himself: detailed description, drawings

An irreplaceable means that will help in hunting for a goose, a duck, a hazel grouse, a fox, an elk and other animals is a decoy, a device that simulates the voices of various animals and birds.

Application of manki

The effectiveness of mangies is due to the biological characteristics and habits of animals. The sound produced by the device is similar to the signals for feeding or the sounds of courtship of an animal.

Significantly increases the likelihood of luck hunting goose with mango, because such a bird is rather cautious. Scientists do not have an unequivocal opinion, why geese cry during feeding. Some believe that in order to drive away competitors, others believe that they can attract relatives. However, as practice shows, during the meal the birds get lost in huge flocks. This can be explained by the instinct of self-preservation: the more individuals, the safer. Usually the leader of a pack hears the cry of a congenitor and regards it as a call to a place where you can profit. To simulate such a cry, use a decoy. In Internet sources there is a lot of information on how to make goose goose mice, how to use it and take care of it, but first we will understand what they are like.

Kinds of mankov for hunting geese

When hunting for this bird, various kinds of adaptations are used, which imitate calligraphy sounds. The production of mankov on a goose can be factory and amateur, that is, it is independent. Some of the factory types of mangs are wooden. Valuable tree species are widely used for their production: rosewood, black and zebra. It is quite common to combine these breeds with cherry or walnut wood. Important is the correct finish and setting of the bait, so that the sound is as close to the natural as possible. Cheaper options are made from organic glass. Electronic versions of mangas are quite popular, but require certain skills. They are difficult to control, therefore, if used improperly, they can, on the contrary, frighten away birds. Sometimes electronic simulators give an echo, so hunting with mank can be complicated. It is best to use this kind of field. It should be noted that the use of such baits is sometimes prohibited due to a decrease in the number of individuals. In such cases, the windmill can be helped out by the goose.

Stages of self-made manga from a cartridge case

Most hunters tend to believe that each of them must make geese manicures with their own hands. There is a large number of options for independent production. So, the most popular of them are made of liners, a balloon, a tree and even from the bones of birds.

Consider how to make a goose mane from a cartridge case. This process is divided into the following stages:

• We drill a nest in which the primer-igniter is fastened. It is important that the hole obtained is smooth, without burrs. In this case, the facet can not be removed.
• We bring the resulting blank to the included grindstone at an angle of 15 degrees. We need to make sure that the hole is symmetrical. If everything is done correctly, then in the workpiece there will be a gap with uneven edges and burrs.
• We process the hole with a round nail file to get sufficiently smooth edges. The width of the obtained lumen is very small and does not exceed 1.1-1.2 cm in the widest part.

• Next, we need a piece of plastic rod. Its height should be approximately equal to the diameter. In this case, its size should exceed the inner diameter of the sleeve by 0.1-0.2 mm.
• From the obtained piece of plastic with a knife, we take a facet 2-2.5 mm wide, in order to be able to insert it into the sleeve. Then we cut off the "working chamfer", ie, cut off its part at an inclination to the axis of the cylinder in such a way as to obtain a chamfer, which in a narrow place is equal in width to the wide point of the lumen opening, and in the widest one - a couple of millimeters more.
• We put the plastic in the narrow place of the chamfer into the sleeve. Plane lumens and chamfers should be parallel.
• The last step is setting up the bait. To do this, you need a nadfil and little finger. You need to slowly move the cylinder inside the sleeve and check the sound until it reaches a uniform and clear sound with any amount of blasting power.

Homemade manoeuver from a balloon

As mentioned above, you can make geese manicure with your hands using a balloon from a siphon or pneumatic. The manufacturing process is as follows:

• First of all, you need to release gas. As an option, you can screw the screw into the rail, pre-clamping it in the vise, then, taking care of yourself with headphones and glasses, from the distance of the outstretched hand, hit with a hammer.
• We drill a narrow hole in the mouth of the balloon to a diameter of 3-4.5 mm. And we grind the opposite surface to a flat circle with a diameter of 1.2 cm.
• Make a hole in the resulting surface. Then we extend it with round nadilles by progressive and circular motions. After that, we flatten the resulting burrs.
• It remains to check the sound. With one hand, it is necessary to fix the received decoy, and with the other finger to close the narrow hole, then blow it into it. It is important that the decoy was fixed securely, and the vibrating finger that closes the reamed hole did not displace it.

Manococcus from the bones of a bird

You can make geese manicure with your own hands in another interesting and unusual way. To do this, after a successful hunt and a successful eating of black grouse or capercaillie, we take the bones from their shins. Then, using a saw for metal, cut off the heads of bones and clean their contents. For a while, we lower them into acetone for degreasing, then we attach the bone to the shape of the manga. The next step is to make a sound hole, the size of which should be approximately 2.5 mm, given that the diameter of the bone is 4 mm. It is important not to forget to remove the chamfer from its edges for thinning. After that we take a little wax and two drills with a diameter suitable for the bone. We roll it into the sausage and thrust it with the tail parts of the drills in such a way that the sound hole is closed by one third. Next, we make an air channel to the sound hole, for which the needles are good: thick and thin. It is necessary to clean the channel well to achieve the desired sound.

Peculiarities of a gnome on a goose

The use of a windmill can be fraught with some difficulties, because it is rather a musical instrument. It should be understood that the sounds that birds emit are not just screaming, but communication, so it's important to learn how to manipulate the sound that the bridgework gives out to the geese. With his own hands to make or buy it - this is the personal choice of each hunter. When manufacturing such mangs, wood, acrylic or polycarbonate is used. Wood sounds better, acrylic is the most resistant to weather conditions, and polycarbonate is the cheapest. It is best to choose a material for lure bright color, because it's easiest to find in the grass, if you drop it. Although the transparent version of the design is easy to use, because it allows you to monitor the condition of the inside. It should also be noted that for each species of geese a certain timbre of sound is needed. For the Lesser White-fronted Goose, a decoy with a sound must be used, which differs significantly from the sound produced by the gray goose manok .

How to hunt geese with bait

If collective hunting for geese is planned, then each member of the group must follow certain rules and act within the limits of the assigned roles. The main of them: observe immobility, carefully disguise and shoot only at the command of the team leader. Hunters should be at a distance of good hearing of each other. It is best for bait to use stuffed animals, to which birds react. Noticing them, the geese will either fall or turn lower. At this point, the ideal solution is to use the decoy. In the event that, after noticing the stuffed animal and reacting to the sound of the manga with a response cry, the pack does not decrease, this means that it is flying. You can shoot if the height does not exceed 60 m. When the pack is going to go down, the geese break the wing. At this point, the hunters freeze and hide their guns to themselves until the moment when the flock drops to 30 meters. Lower it is rarely obtained even from the most experienced hunters. At this point, the senior gives the command to shoot.

How to blow in the decoy correctly

To begin with, it is necessary to put the decoy to the mouth correctly. It's easy, it's enough to remember how the glass is applied to the lips. To get the right sound, air should be pushed out of the lungs with the aid of a diaphragm. To clarify, let us give an example. When you want to wipe glasses glasses or lenses, breathe just the way you need to blow into the decoy. You should practice before you go hunting. Then you need to practice doing the same thing, but only more dramatically, to feel how your abdominal muscles tense. This feeling is better remembered, because such an exhalation will be the main one when hunting the white-fronted goose. It is important to hear a sound that is somewhat similar to the cry of these birds.

Manicure care

Despite the fact that a geese manicure has been purchased or made with his own hands, caring for him requires equal care and attention. If this is neglected, then its settings can easily get lost, which will bring a lot of difficulties during its use. Experienced hunters recommend storing it in a bag made of soft material. It is necessary to monitor and for the absence of contaminants. After all, slovenliness can seriously affect the sound. With proper handling and storage, such a thing will last a very long time.