Homeliness, Do it yourself
What kind of net for rabbit cells is needed: dimensions. How to make a cage for rabbits from the grid with their own hands?
The content of pets requires great responsibility from the owners, no less than raising a child. In this case, it is necessary to strictly comply with the rules and regulations for the breeding of pets. The most important thing is to create the most approximate conditions to those in which animals live in nature.
Houses for rabbits
Rabbits, despite the fact that they are resistant to most diseases, are unpretentious in food and living conditions, yet they need a properly equipped house. Housing must be built taking into account the number of individuals, sex and age.
The cost of ready-made houses of imported materials can pay off soon enough, so many come to the decision of self-construction of dwellings. This is a much more advantageous option. In this case, the question arises as to how to make a cage for rabbits from the grid. Manufacturing housing for ears does not require any special skills, it is enough to follow all the advice and make calculations correctly.
What grid is needed for rabbit cells?
The main criterion for constructing a literate house for ears is the choice of material.
Best suited is a galvanized metal grid for rabbit cells, which has a number of undeniable advantages over its counterparts.
This material is famous for its durability, due to this disappears the need for periodic replacement of the walls of the house. In addition, galvanizing provides the material with resistance to rust and corrosion, which also affects the service life of the product. Thanks to the small size of the cells, the hares can not gnaw the net, which also increases the longevity.
How to choose the diameter of the grid cells?
In construction, a metal grid for rabbit cells with a cell diameter of 1.5-2 cm is best suited. There is a grid with rectangular and square cells, it is preferable to choose the second option, since then the material is better resistant and sagging is eliminated. You can use large cells to arrange the roof, for the same floor it is better to take small ones so that the paws of the pets do not fail.
Experienced rabbit breeders prefer a welded metal grid with hot galvanizing. You can distinguish this view from others with the help of sagging weld seams. It is this net for rabbit cells that will last you for many years, thanks to the thick layer of zinc, it will be pleased with the resistance to corrosion and rust.
When choosing a grid, you need to pay attention to the geometry of the cells, if the curvature is noticeable, then there is a bad bond in the welding places. Also, if the rods are thin (less than 2 mm), then the mesh does not fit.
Variants of buildings
There are many options for building a house for breeding and keeping eared. On which option to stop - to solve only the owner of the animals, but it is necessary to pay attention to the convenience of housing.
Most often, two versions of buildings are used, in which a grid is used for rabbit cells:
- Frameless cell on the supports (more suitable for keeping animals in the room);
- Wireframe.
What do you need to know in order to build a house for hares?
To make a house yourself, it is worth to acquire the necessary materials:
- Grids with cells 25 x 50 and 10 x 25 mm;
- Fastening rings;
- Tin sheets for pallets;
- Plywood for walls and walls;
- Brusks 50 x 100 mm for the frame;
- Nails / screws;
- Metal corners for the frame;
- Canopies (7 pcs.);
- Plastic edge;
- Bolts (1-2 pcs.) For doors;
- Materials for roofing, you can use slate / corrugated board;
- Tape measure;
- With a pencil;
- Hammer;
- Screwdriver / screwdriver;
- A hacksaw;
- Scissors for metal;
- Pliers;
- File.
Construction of cell walls
Before you start building a house, you need to decide how many individuals will live in it. An animal should have enough space for movement, because these are very mobile individuals.
Based on the selection of the grid size for rabbit cells, you can start cutting material for the front, back and side walls. The front and back walls should be the same in size, just like the side panels.
Further, it is necessary to cut the top and bottom of the dwelling, they must also be the same. However, the lower part of the house is cut from the material with smaller cells to protect the hares from the injuries of the legs.
Using the fixing rings, we collect the walls.
You can install a partition in the house from the plywood, so that the rabbit can entertain, moving from one zone to another.
We construct the bottom of the building. A tin pallet is needed to remove excrement. We fix the bottom of the cell, retreating one cell. Remove the twigs of the bottom cells, there will be inserted a pallet.
Next, you need to decide how many doors there are and where they will be located. In these places, make slits and process the edges using a file.
To reduce the likelihood of a rabbit injury, we set the plastic edge in the doorway.
Cut out the door a little more than the size of the opening and fix the mounting rings. We install in front of the bolt, so that the house can be tightly closed.
We set the top of the cell.
We make pallet for a house
Now you can make a pallet. Cut out the sheet from the sheet in size a little more than the bottom of the cell. If there is a partition in the cage, and if several individuals are kept there, it is better to make a pair of pallets.
The workpiece should be given the appearance of a trough, this can be achieved simply by bending the sheet. It is necessary to make sure that the pallet is placed in the place prepared for it.
Then you can proceed to the manufacture of the frame of the house. Make it yourself is not difficult. We use wooden bars. The frame needs to be sized slightly larger than the cage itself, so that the net for the rabbit's cell is unobstructed to fit into it.
We connect the frame around the perimeter of the metal corners. Of the bars attach the legs, their length should be at least a meter, so that rabbits are not threatened by predators.
Cell insulation
From the plywood we make the back and side walls to the size of the frame, they need to be attached by canopies to the upper beam. It is required that you can hide shelter in the cold.
For the purpose of warming the roof of the house you can use a plywood sheet. Having equipped the cage with additional insulation, you can be sure that rabbits do not threaten anything even in cold weather.
The last stage will be the installation of drinkers, feeders and nurseries for hay in the house. Drinking bowls and feeders are best installed outside or in any other way, but so that pets do not contaminate their contents.
If you follow the simple instructions described above, even beginners in this case will not be difficult to build cages for rabbits from the grid with their own hands. Each animal requires special care and acceptable conditions for life. Providing a warm home and fresh food for hares, you can not worry about the health of eared.
If you build a simple version of the cell yourself, then in the future you can make adjustments based on the experience gained. Over time, you can build a real rabbit farm without spending a lot of money.
Similar articles
Trending Now