Gas block: reviews and construction of houses from it

More recently, the most widely recognized and the most common building material was brick, while today the gas block comes to the forefront. Reviews of him testify that in our climate he showed himself well. He is the best in low-rise construction. Advantages, it is worth noting, he really lacks.

This building material is durable, lightweight, and also does not interfere with natural gas exchange. In addition, it does not pass moisture at all and is completely harmless to human health. Houses from the gas-block, reviews of which are mostly positive, practically do not respond to the open flame. In this structure, you will be warm in winter and cool in summer, as the pores in the composition of the material are an effective heat-insulating layer.

For builders, however, the advantages of the blocks are in their strict geometric form. They are so standardized that masonry of walls and their alignment become much easier, do not take a lot of time and effort. If we talk about the almost perfect flatness of the surface, there are practically no gaps between blocks, in which cold air and moisture from the environment can enter. Thus, the gas-block (feedback about which this is confirmed) allows you to create not only aesthetically perfect, but also comfortable for living at home.

Any more or less significant construction always begins with the foundation pouring. For aerated concrete buildings, almost any type of it is suitable, but most often a cheap tape type is used. It is necessary to dig a trench, strictly observing the proportions of your future building. Its depth can vary from 0.3 to 0.8 m.

Please note that the gas block, which is generally positive in the comments, is very sensitive to the distortions of the base, so the foundation should be made as strong as possible. So do not skimp on a normal crushed stone pillow. Required availability of quality fittings. Rubble carefully rammed, then poured with concrete.

Because of the same feature of the material, it is necessary to anchor the inner walls as tightly as possible to the supporting structures. This is done on bolted connections, dowels or a special tape. The more monolithic the design is, the better you will protect the building from the occurrence of cracks in the walls.

Plasticity and ease of processing of foam concrete can be used in their own interests, erecting interior arches. This material is easily sawed, and a small specific weight makes it possible to do without complex fasteners. In principle, the gas-block (the reviews are confirmed by this) is an ideal material for building houses with various decorative elements. Its advantage is also that such structures do not require shrinkage at all, and therefore it is possible to proceed to interior finishing almost immediately after erection of the box.

The same positive qualities are used in the case when a bath from a gas block is necessary. Reviews of such pairs say that they are not much worse than the classical version of wood in terms of their performance characteristics.