Universal ladder "Eifel"

Folding sectional ladders are necessary not only in the professional sphere (repair, construction), but also in everyday life. Remove the fruit from the trees, wipe the dust on the cabinets, hammer nails under the picture on the wall - all the moments when you need staircase equipment, do not count. Use with heavy metal stairs or flaccid steps with wooden steps is very inconvenient, and sometimes dangerous.

It is quite another matter - folding models. Today the market has a lot of similar equipment, but not all of it is of high quality and convenient. But reliable, durable and versatile are the products of the company "Eiffel Stair Factory", which are developed and produced by specialists of this company. And this is the only company in Russia that produces products, using for this purpose fiberglass and anodized aluminum profile. What other advantages does the equipment have?

Product Features

The ladder "Eiffel" is a design that:

1. Made of high quality profile. The thickness of the profile parts depends on the height of the products - the higher this figure, the thicker, and therefore, stronger and more reliable, the profile is used.
2. Easy to use.
3. It's safe. To ensure that the structure does not slip when used, anti-skid caps are installed on its supports. In addition, the surface of the steps is corrugated, which prevents slipping.
4. Is practical. Even high models do not take up much space when stored or transported, as they can be compactly folded.
5. It differs in variety of assortment, including color solutions.
6. Does not rust, thanks to which it retains its strength and original appearance for a long time.

But most importantly - all products meet the standards and requirements, which confirms the set of certificates.

What provides stability and security?

To the aluminum stairs "Eifel" were safe, the company's specialists developed and implemented the following elements:

1. Seat belts.
2. For fastening sections, steel locks are used.
3. Supports on rivets of non-slip material.
4. Wide traverse. This is the name of the lower beam lying on the ground (semi).
5. Non-slip shoes on wide traverses ensure that the device will have a stable position on any surfaces.

Specifications

All products are either L-shaped or L-shaped. Products made of aluminum can withstand a maximum weight of up to 150 kg. The weight of the equipment depends on the working height and the number of steps. For example:

1. The ladder "Eiffel" with three steps weighs 5 kg. Its working height is 2.7 m.
2. The product with 5 steps weighs 4.8 kg. Working height - 3,1 m.
3. The seven-stage model weighs 7.6 kg. The working height of the product is 3.6 m.

Fixing of products-transformers provides fittings with a special coating. For the construction, anodized aluminum is used, which retains all its properties for a long time, does not rust and does not stain hands when it comes into contact with it.

Types of staircases

The company develops equipment in several directions, so the following products are on sale:

1. Universal. The so-called stair-transformers on the hinges. They can be used as cantilever, side-by-side or double-sided structures, serve as a stage.
2. One- and two-sided dielectric models of fiberglass. Such a ladder "Eifel" can be used in cases where it is necessary to work next to the conductive elements.
3. Household. This is a one-sided kind of products that can have from 2 to 8 steps.
4. Professional. One- and two-sided models are produced.
5. Three-section constructions of multifunctional type. Can be used as equipment with retractable consoles; Side models or two-sided.

What each product represents, the following information will help you understand.

Products for home

For performing certain types of work, the Eiffel Classic staircase-transformer is indispensable. It is made of anodized profile. There is a structure of four elements. Everyone is 3 steps. Thanks to the presence of automatic locking hinges, the design can be locked in any position. The working height is 4.4 m, and the total length is 3.58 m. The product weighs 13.3, in the package - 13.8 kg.

The advantages of the design include the following features:

1. Multifunctionality. The usual staircase can easily be converted into a model with a carry-over, a ladder, a stepladder, a platform-platform.
2. The presence of grooved steps, which are attached to the base by a strong expanded joint.
3. For the anodized rails, a reinforced profile is used.

Professional staircases

To facilitate the performance of high-altitude works on the construction site, manufacturers have produced specifically designed for this purpose. This is a three-section ladder "Eifel". The maximum height that can be climbed using this ladder design is 10.7 m. For manufacturing, aluminum was used, which is able to withstand the effects of moisture, water, building materials, including putty, solvent, paint. The product weighs 26.8 kg.

Among the most important design parameters are the following indicators:

1. Ability to work at different levels. The presence of this function allows you to install the product on stair flights.
2. Presence of safety belts.
3. For the manufacture of anti-slip plugs, composite plastic was used. Due to this the surface is resistant to abrasion and allows you to install a ladder on the surface of any material.

Universal models

Universal ladder "Eifel" - another product designed for use in the work of professional builders. There are several models of universal staircases: "Prostor", "Premier" of different modifications.

Model "Prostor" (height 7.1 m) is most often used in the work of finishers, plasterers, painters. The product is multifunctional, since it is possible to change its configuration. In the folded state, the structure has a length of 1.8 m, weight - 20.4 kg.

Benefits:

1. For the production of fittings, galvanized steel is used , which guarantees durability, strength and reliability of the structure.
2. The steps to the sidewalls are fastened with a flared connection, which is considered to be the strongest.
3. It is possible to retrofit the structure with a platform. To do this, you can use a moisture-proof plywood coated with anti-slip material.

The ladder "Eiffel Premier" is convenient for the production of painting, installation and other construction works. For convenience of use, in order to have access to overhanging structures, it is possible to transform the product from a two-way ladder into an attachment model, and very quickly. If you assemble equipment in the form of a platform, you can use it as a table.

Benefits:

1. The ability to change the working height from 1.2 to 3.9 m.
2. A reinforced profile is used to make the rails.
3. The design has 4 positions.

Transformers for professionals

Constructions-transformers are reliable professional equipment, which can be used for repair and construction works. One of these models is the Eiffel ladder-transformer. From the ladder you can make a ladder with a stalk, a ladder or a platform platform. There are models-transformers "Classic" and "Premier".

Features of the product "Premier":

1. The corrugated steps of section 28x28 mm are located close.
2. To prevent slipping, shoes are installed on the transverse traverses.
3. Secure locking is ensured by automatic locking hinges.
4. The maximum length is 4 m, weight - 13.8 kg.

The ladder "Eifel Classic" is of the same type, and differs from the previous model in the first place by the height of 6.1 m. The product weighs 16.7 kg. Transformer model "Prostor" weighs 16.1 kg, has a total length of 4.5 m, working height - 5.4 m. The rest of the indices are no different: the same materials are used for manufacturing, reliability is provided by elements with galvanic coating, the differences are Only in overall dimensions.