Fryer machine: description and technical data

Those who decided to do business in tailoring, should know what a furrier's car is. This is one of the types of special sewing equipment. This highly specialized technique is designed to work with heavy materials. It can be leather or fur. With the help of machines of this class, fur coats, collars, fur toys, slippers, and also other products made from high-density materials are sewed. At sewing facilities without this equipment, it is impossible to manage. The main advantage of this technique is a special type of stitch, allowing you to stitch the product over the edge, without having to cut the material. At the same time, a considerable tightening of the thread is observed. Despite the fact that this is purely industrial equipment, it is also used in small sewing workshops. There are also household furrier machines.

Who are furriers?

Now these are the operators of these machines. Previously, the so-called specialists who were engaged directly in dressing skins, as well as the manufacture of various fur and leather products. Furrier's craft came from antiquity. And then it was for a long time only connected with the process of dressing skins and skins.

Features and differences from ordinary sewing machines

Furling machine has a lot of differences from the usual sewing. So, one of them is the horizontal stroke of the needle, not the vertical one.

The equipment is divided into domestic and industrial. Single-strand and two-wire models are produced. Household equipment can rarely be found even in specialized stores, but online stores offer to purchase such equipment. The average price is about 35 thousand rubles. Industrial solutions designed to handle a large volume of materials, cost from 100 thousand rubles. Some specialists in the cervical case state that it is quite possible to use the zigzag type for sewing the skins of natural fur. It is in the functionality of a conventional sewing machine. But in fact, you can make such a seam only to connect small pieces of fur or leather with the base material. Zigzag stitching large materials, sewing hats and fur coats is impossible. And professionals know about this. To make fur, it is absolutely necessary to use furrier's machines. They allow you to get a special furrier's seam.

Where do they use such seams?

The thread is inserted into the needle, from which it is fed to the looper, and then it is removed. In this way, the machine produces a seam. This type of seam is used for the processing of leather products. Also, the furrier's method is popular when working with artificial fur. Its advantage is in high density. After sewing it is almost invisible from the outside.

A furrier for making this special seam requires the use of special threads. The seam has one more feature. Its extreme stitch must be fixed, otherwise everything will dissolve.

Benefits

This technique is characterized by high performance, when compared with conventional sewing analogues. Also this equipment allows to save essentially time of technological industrial processes. The presence of a high stitch makes it easy to grind sufficiently thick and thick materials. Also among the advantages should be noted the resistance to wear and reliability of industrial solutions. Machines have a smooth running thanks to the automatic lubrication system. Lubricating fluid is fed through a special pump at all times. Oil leakage is solved by the presence of special seals in bearings.

Varieties of models

Industrial equipment is characterized by the presence of a special table. The machine can operate for 8 hours or more without interruption. The device has a large weight, a serious size and is highly specialized.

Household solutions are more versatile and suitable for working with most types of fur. Such machines are very compact.

Also, models vary in numbers from one to four. The digits indicate the thickness of the fur to which this or that device is designed. So, for use in everyday life and a small sewing studio, equipment # 2 is sufficient.

Strobel 10-B

Industrial units from Strobel are designed for industrial operation. Furrier 10B from household differs by the presence of a table, as well as additional functionality. In addition, there are differences in the method of pneumatic hair styling of the bellows during operation. For use in everyday life, this model is not intended.
The machine is equipped with a special desk for work, as well as a powerful industrial motor with a high level of noise and energy consumption. Although the technique is not suitable for everyday use, it sometimes installs a household drive from a conventional sewing machine. But for this you need to rework the motor mount. The power of this drive will be enough to handle products made of sheepskin. If you set the release lever of the pressure discs, then you can abandon the table, and the machine will be mobile.

The thread from the coil, which is mounted on the rack, is fed into the thread guide through the tension regulator under the rod, and then into the clamp. Then it is carried into the wire guide and in the eye of the needle from the bottom to the top. In the process of operating the machine, the clamp engages the rod. When the needle exits the material, the rod will pull the clamp off. This reduces the thread tension. When the needle reaches the end position, the first stage of thread tightening begins. The second occurs when the needle eye extends with a looper.

Despite the apparent simplicity, the design of this model is complex. In the tuning machine is very capricious. Even professionals have certain difficulties in the process of setting it up. Conceived failures in the work occur due to the inept work of the operator. As a result, the needle bends, and the looper also stumbles. When working with different thickness materials, a machine with a certain number is used. But the materials can have different thicknesses. Then the machine starts to fail. The instructions of the furrier machine indicate all the parameters necessary for adjustment and operation. This is the permissible thickness of the skin, fur and thread, manufacturer's recommendations regarding the needles used.

"Aurora-GP202"

Furling machine "Aurora" is designed to work with the skin and medium fur. It can be used for sewing of fur of astrakhan, squirrels, foxes, beaver, moles and nutria, rabbits, wolves and so on. The machine is capable of sewing material up to 3.5 millimeters thick. It is a compact desktop model equipped with a household electric motor.
The material is advanced by cogged disks. The lubrication system is automatic and centralized. Productivity - 2800 items / min. The stitch can have a length of 1 to 3.5 millimeters. The weight of the unit is from 20 to 23.5 kilograms. Among the advantages that the Furrier of the 202-th model possesses, they are compact in size and light in weight. Also, the reviews point to low energy consumption, the ability to install on the table, the presence of a pedal for the decompression of disks.

Conclusion

Apparently, in production without such equipment can not do. But it is worth considering that this equipment is highly specialized. It is bought in the city of Moscow furrier's car in the appropriate stores, but not always this technology is available. It is best to contact the manufacturer directly or purchase the model in the online stores. There are many Chinese products on the market - it is not of high quality.