Alligator (alarm) - car protection

In order to protect your car from theft, it is necessary to install protective equipment. The Alligator (alarm) can perform programmed actions. Functions and some modes can be changed during reprogramming. Alarm functions: protective, anti-theft and service, namely: silent operation mode, anti-plague mode, immobilizer, turbo timer with engine running; Additional control channels; Regulation of car interior lighting; A call from the car; Indication of time and temperature. To place and perform the installation of components of the security system is necessary, taking into account the unspoken rules. The central alarm unit is preferable to be installed in the cabin in a hidden place, preferably under the dashboard, so that the length of the connecting wires is the least. It is necessary to install the unit in such a way as to prevent even minimal liquid penetration through the wires inside the housing. To prevent movement and vibration, with the help of self-tapping screws the unit must be fixed on a flat surface, it is permissible to use double-sided scotch.

The module of the transceiver, which has the Alligator (signaling), with the antenna fastened better under the panel at a distance of 5 or more centimeters from the metal parts of the body, thereby providing the maximum range of operation of the key fobs. It should be remembered that the sensor showing the temperature of the air in the passenger compartment is in the same housing of the module, in connection with this the housing needs to be placed away from heat sources, otherwise the temperature will differ with the temperature in the showroom. Signal, when installing the alarm, it is necessary to place under the hood away from heat, moisture. In order to prevent the ingress of liquids, turn the signal bell down. Be sure to check that there is no access to the siren and wires from under the machine, that the Alligator (alarm) is properly installed. The impact sensor is rigidly fixed in the car's interior, with access to its adjustment. Additional sensors are also rigidly fixed inside the cabin with access to the adjustments of the instrument, if any. The LED indicator, which provides Alligator feedback with feedback, must be fixed on the panel. The "service" button should be installed in an accessible place that is not visible to other people.

After installing the hood and tailgate hoods, check their operability. With a closed hood or trunk between the contacts in the switch, the gap should be left at least 3 mm. The inaccuracy in the installation on the buttons of the switches of the hood or trunk can result in false alarm. It can also turn into trouble.

Route the wires as far as possible from the source of electrical interference. They should not touch the moving parts of the car. It is obligatory to make the installation of wiring connections with the Alligator alarm equipped with the vehicle battery disconnected. Instruction can help in this. The central unit with other components must be connected to the cable connectors only after the installation has been completed. The Alligator is set in accordance with the wiring diagram.