Winch for ATV: features of choice and installation

Quad bike - it's quite a heavy vehicle, which can sit firmly in the mud. And manually pull it out from there is unlikely to succeed. Therefore, the winch for the ATV is a very necessary and practical acquisition. There are many types of presented devices: manual, mechanical and electrical. The latter option is most common.

The winch for the ATV should have a certain tractive effort, which should be 3 times the mass of the vehicle itself. The most efficient is a device with screeds. The unit must be of good quality, all parts must be made of strong materials.

Now pay attention to the cable. For today, steel and Kevlar elements are used. The last option is often the first one needs cleaning, otherwise it will just rot. However, Kevlar is a safer material than steel, since in case of a breakdown it is less traumatic. Moreover, despite the strength, on the surface of the metal over time there are burrs, which are very easy to injure.

The ATV winch can be equipped with a wireless or wired remote control. The first option will be indispensable if you are used to driving yourself. Next, you should pay attention to the winch rope. It can be roller or steel. Another important issue is the location of the installation of the device. Most often it is mounted in front.

Installation of the winch on the ATV is made on the bumper-bump. However, in order that it does not crash ahead of time, it is better to weld to it the metal corners on which the device will be fastened. Rear winches are mounted extremely rarely, although you can use a removable version. In order for the device to work effectively, it should be equipped with a shroud strap. To switch the modes of operation of the unit, it is better to use the lever, rather than the mantle.

The ATV winch should only be used when the engine is on, and it should not be planted. The presented device will help to quickly pull your transport out of the mud. This unit is especially needed for those people who like to ride off-road. In order to pull the ATV out of the swamp, you must tie one end of the cable to another vehicle, pole or tree and turn on the winch.

As for the choice, you should pay attention to the car devices, because they are universal. The electric winch for the ATV must meet certain requirements. During the selection, consider the power of the device, its compactness and practicality, ease of use, reliability, as well as the weight of the structure. All these indicators depend on the size of your transport, the performance of its engine and the total mass. In principle, these are all the features of choosing and installing winches on your vehicle. If you want to drive on any landscapes, we advise you to purchase the presented device. Good luck!

Similar articles





Trending Now






Copyright © 2018 Theme powered by WordPress.