Vibratory tables for paving tiles with your own hands. Drawings, instructions

Today many townspeople probably would like to have a dacha or a private house on the territory of which there is a well-groomed lawn and attractive paths. If there is no possibility to allocate an impressive amount from the budget, but there is a desire to equip the exterior of the site, it is possible to make a vibrating table for the production of tiles, which will create material for the arrangement of tracks.

Vibration table description

The described design is simple, it is simply indispensable for the independent manufacture of paving slabs. This device will allow you to produce products of different shapes, whereas as a material you should use a concrete mix.

Do not assume that the vibrating table can be purchased only in specialized stores. You can make this design yourself. The upper plate, which is attached to the steel base by means of a movable joint, acts as a base. Among other things, you need an engine that will drive the surface.

In the process of vibration plates from molds, which are filled with concrete, bubbles come out. This is the only way to ensure the proper quality of the product. When manufacturing vibrating tables for paving tiles with their own hands, it is necessary to ensure an ideal evenness of the table top. It should be smooth, and the engine used is to ensure uniform vibration.

Preparation of tools and materials

For the work will need a steel pipe in the amount of 4 pieces, a metal sheet, which will form the basis of the countertop, as well as a metal spring - it will become a mobile connection. The master needs a corner with dimensions of 50 x 50 mm, which can be replaced by a profile profile. Take care of the presence of an engine that will have the right power. When the vibrating tables for paving tiles are manufactured by their own hands, specialists prepare a welding machine, a drill, and also a Bulgarian. To install the engine will need bolts in the amount of 4 pieces.

Manufacturing technology

Despite the fact that the vibrating table is an uncomplicated construction, in the course of carrying out the work the technology described below should be guided.

The base on which the table top will be fixed should be made from a corner or a channel. The dimensions of the vibrating table can be completely different depending on the desire of the master. We will take the standard dimensions, which are limited to 700 x 700 mm. If you decide to use other dimensions, then remember that they must match the power of the engine used.

When the vibrating tables for paving tiles are made by hand, the masters use pipes that act as legs. They should be welded to the base. In order to ensure maximum stability, the steel plates must be welded to the legs and reinforced with concrete. If this stage is excluded, the table will move from place to place while using it, while the stability of the structure will be in doubt.

The height of the table should be chosen individually, but it is important to ensure the convenience of working with the structure. Among other things, the engine should be at a certain distance from the surface of the earth. If you are making shakers for paving tiles with your own hands, then in each corner from the central part you should weld the springs. Those parts that are borrowed from a moped are ideal for carrying out these works. Preliminary they need to be cut in half.

Work Tips

A sheet of metal should be placed on the spring from above. Use material that has a thickness of eight millimeters or more. Bolts are needed for fixing to the engine sheet. If you follow these recommendations, you will be able to make a table that will help produce up to 60 square meters of products within a day.

Engine Selection

Before you make a vibrating table yourself, you need to think about what kind of engine will be used. It is quite suitable for this one that is borrowed from a washing machine. Despite the fact that it works properly, it has a significant shortcoming, which is short-lived. Such a motor can withstand only about thirty work cycles. After that, the axle is wedged or the bearing jammed. That is why there is an opinion, expressed by domestic masters, that such engines can not last long in conditions of high loads, which turn out to be a vibrating table.

As an alternative solution it is possible to use a vibrator of the brand ИВ-99 Е for 220 volts. It is sold in stores of the corresponding goods for 6000 rubles. Such a design copes quite well with the tasks assigned to it.

Among other things, it is important to prepare a drawing of the vibrating table, it will help to complete the work correctly.

If you draw up a similar circuit, then it should specify the location of the AC potentiometer, which will regulate the strength of vibration. In the process of changing the voltage level, it will be possible to adjust the oscillation frequency for a certain type of solution used. However, many craftsmen, thinking about how to make a vibrating table with their own hands, decide to save using only the engine.

Secrets of the work

It is important to make such a table, which will not only be strong, but also sufficiently resistant to vibration. Only in this way will the structure be able to withstand the loads exerted. The motor must be installed in a specific location. Sometimes it can only be determined by experience. The worktop will consist of a rectangular frame and a steel sheet. It is sometimes equipped with an additional frame on which the source of vibration is strengthened. Springs for the vibrating table will provide a limited mobility of the table top, so their choice should be approached seriously.

Conclusion

In addition to the springs, it is permissible to use hinges made of a strong bundle. The rope will do. Four such joints, located at the corners of the base, will allow to center the above located platform. When choosing a vibration motor for a vibrating table, you should consider that it should not provide an excessively strong displacement of the table top relative to its original position. Otherwise, it will not be possible to rule out the pouring of the solution, which was distributed according to the forms. That is why it is recommended to pre-examine the factory models.