Tramp for tracks is the ideal solution for a country house or villa

In the design of the site of a country house or villa there are no small things. Each detail of the design emphasizes the chosen style, which should be one. Quite often the hosts, in addition to the main tracks that are used constantly, spread the so-called walking, and they can be done without special preparation of the base.

Today in the arsenal of landscape designers for the device of walking alleys there are many ways and materials. This can be a path made of wood or gravel. But in the event that you plan to spend it through the lawn, it is best to use a flagstone for the tracks.

The advantages of this material are obvious - durability, aesthetics, practicality. The combination of natural stone and a bright green lawn always looks very impressive.

Garden paths from the flagstone, when the stones are laid out in a chain one by one (wooden laths can also be lined), landscape designers are called step-by-step. In addition, this can be done with a stone in the form of a mosaic. In this case, the seams between the elements are at least five centimeters. This is done to ensure normal growth of the grass. Usually their width is from eighty to one hundred centimeters.

Many people are interested in the question of how to lay the flagstone on the tracks correctly, and whether it can be done independently. The main condition for creating such an alley is a perfectly flat lawn that does not have any protrushes. If your site does not meet these requirements, then first you need to put it in order.

The flagstone for the tracks should be used rather large, with a thickness of at least four centimeters.

First you need to create a path contour. To do this, you can use a rope or watering hose. Then the mosaic is laid out according to the previously listed requirements. Then, on the contour of each stone, the sod should be cut. The material is removed and this part of the lawn is removed. Just remove the ground and the depth of the stone, and the bottom of the resulting notch is covered with a thin layer of sand, on top of which is laid directly described material. It should be at a level with the ground or protrude over its surface for a maximum of one centimeter. In the event that it significantly rises above the surface or, on the contrary, it is drowned, it is removed and poured or removed excess sand.

Rockclimb for tracks is the ideal material. The rough surface will not allow you to slip on it in wet weather, its height can withstand solid loads. Especially it is necessary to allocate a granite flagstone for the tracks. It differs from other types of stone in a very dense composition and ideally flat surface.

Paths made of stone are an interesting solution to landscape design, creating harmony of all elements of the site. Plitnik is a durable road surface. Its use in the design of lawns will transform the territory radically. Such paths will create an individual, special coloring on your site, aesthetically complemented by landscape design.