Fence from polycarbonate - reviews, installation features and types

Wood and steel today are quite often replaced with other materials used to make fences. Polycarbonate is one of the most popular solutions. He wins the wood by the fact that the latter begins to break down, rot and crack in time. The same thing happens with iron: it is negatively influenced by external factors. This material rusts, deforms and loses its appearance during operation.

However, having become acquainted with the assortment of goods of the modern market of building materials, you will be able to understand that technological progress has moved far ahead. Manufacturers offer different types of synthetic polymers, which are not afraid of weather conditions and temperature changes. In this case, it is all about the same polycarbonate, which has found its application in many areas of human activity. From it, you can make entire structures and structural elements. This includes fences.

Types of fences from polycarbonate

Before starting the construction of the fence, it is necessary to find out what kinds of polycarbonate fences there are for the dacha. Among other options, it is necessary to distinguish a welded structure, in which the frame is made of profile pipes or steel corners. A polycarbonate sheet is attached to the rear surface of the structure by fixers or self-tapping screws.

Such fences look good when they are supplemented with a forged base. Another type of fence is a building made of stone or brick, which is complemented by polycarbonate canvases. Such a combination, according to experts, is one of the successful ones. As a result, it is possible to obtain an aesthetically attractive design.

Fencing can also be classified according to a variety of polycarbonate sheets, which can be cast or honeycomb. The latter variety is cheaper than a monolithic analog. And choose this fence is also because the polycarbonate has high sound insulation characteristics. This is especially true for owners of houses that live near busy roads, roads, stadiums, airfields and other structures, the functioning of which is accompanied by a strong noise. This can cause inconvenience and trouble.

Positive reviews

If you are thinking of choosing a polycarbonate fence as a fence, feedback about it will help to make sure the decision is correct. In the opinion of consumers, this material is good because it does not suffer from moisture, so the sheets do not rot and do not rust. Any structures and structures are able to withstand weather troubles, among them:

• rain;
• frost;
• snow;
• wind.

According to consumers, sheets are popular because they are not afraid of the effects of temperature, whether it is high or low. The polycarbonate fence, whose reviews it will be useful to read before purchasing this material, is also different in how it undergoes mechanical loads and shocks. The appearance of the fence during operation will not be affected.

The material is flexible. Sheets can be given any shape, this allows you to make designs of any complexity. Customers also note the low weight of the canvas, so their transportation and installation are facilitated. Polycarbonate is easy to process, it can be sawed, drilled and cut. The main thing is to find the right tool.

Regardless of what kind of material you are planning to use, the created design will not create a strong shadow, as it does when installing fences made of wood and metal. Customers choose polycarbonate also for the reason that it does not require special care. From its surface, from time to time, it will only be necessary to wash off the dirt.

Negative feedback

The polycarbonate fence, which you can read about in the article, has some drawbacks, according to consumers. Among other things, it is necessary to emphasize the need to use a reliable foundation when installing the fence, otherwise the material will be carried or carried away by the wind. In addition, according to customers, the impact resistance of the canvas has its limits. Therefore, the construction should not be thrown stones.

If you plan to use a cast material, the polycarbonate will be able to withstand even a shot from the gun. What is true for a 12 mm sheet. However, buyers emphasize that the material of this thickness is quite expensive, and this is its main drawback.

Mounting Features

Before you begin the installation of the fence, you should prepare some tools, among them it is worth highlighting:

• Hand drill;
• Sledgehammer;
• The Bulgarian;
• Screwdriver;
• building level;
• Nylon thread.

To begin with, it is necessary to mark out the territory, these works are carried out in two stages. It is important to evaluate the perimeter. The master needs to calculate the number of canvases. If the soil surface is not flat enough, and it meets the ways of the mounds and hollows, then this problem must be eliminated by pouring the soil or removing it.

The next step is to identify the places where the poles will be installed. For their installation digging pits. The depth of the bottom of the foundation should be located below the freezing level. If there was not a suitable room for storing polycarbonate on the site, then the canvas should be covered with a dense cloth that does not allow the sun to pass through. On the sheets should be laid cargo to protect them from the wind.

Construction of a fence

After reading the reviews about the polycarbonate fence and realizing that this design is suitable for you, you can proceed with installation. As soon as the first stage of preparation has been completed, it is possible to start laying the foundation.

When creating a foundation, one should rely on the depth of soil freezing. But not every developer knows these parameters. As a rule, the pit depth varies from 0.8 to 1.2 m. For most regions belonging to the European part of the continent, the depth of freezing is 700 mm. But it is better to act with a margin that will compensate for changes in the water table.

For complex ground, it is recommended to use a strip foundation, which is deepened by 1000 mm. Its width should be 300 mm. Under each support it is necessary to dig a deep hole, and at the place of mounting the column make a "nest", which will have large dimensions. They can be equal to 450 x 450 mm.

Reinforcement

Installation of a fence made of polycarbonate on a metal frame, the feedback you could read above, provides reinforcement. This will ensure the reliability of the fence during ground motions.

Use for reinforcement should be a reinforcement, the diameter of which varies from 10 to 16 mm. It is important to monitor the continuity of the framework. Elements are welded or connected to each other in sieve boxes, which are laid without missing.

Installation of metal frame

The next stage of installation of the fence for polycarbonate dacha, which you could read about above, is the installation of poles for paintings. The distance of the metal supports from each other should be 2 m. Use the level to align their position.

Supports are poured with a mixture of sand and concrete. Once the solution has dried, the guides from the pipes can be welded to the posts. The resulting construction will become the basis for polycarbonate cloths.

Installing sheets

If you decide to install a fence of polycarbonate, the cost and feedback you need to be aware of. However, those who work on their own, at the next stage, you can start fixing sheets to posts with screws. You can apply bolts or rivets. When drilling holes from the edge of the blade, 4 cm should be retracted. The drill must be designed for metal or wood. All fastenings should be located on one level.

Cost of fence

If you do not want to engage in installation work yourself, you should know the price of a fence made of polycarbonate. Comments from consumers will help to understand which team of specialists it is better to give preference to. If the height of the fence is 2.1 m, then paying for 1 running meter will have 1980 rubles. In this case it is a question of fencing on the logs. The thickness of the polycarbonate is 4 mm. If the last parameter is increased to 6 mm, then the payment for 1 running meter of fence installation will have 2200 rubles. In this case, the supports are clogged into the ground at 1300 mm.

Conclusion

Sometimes, having got acquainted with the price for a fence made of polycarbonate with the installation, consumers decide to do the work themselves. Which, in principle, is quite possible. The installation technique is not particularly complicated, the main thing is to follow the recommendations, then the fencing will last a long time and will please the owners with their appearance.