Of what and how to make the slopes of the front door?

How to make the slopes of the front door? Many people face this problem after repair or after buying a new home. After installing the entrance door, the appearance of the space around it can hardly be called attractive. Bricks or concrete do not blend well with the new beautiful door. At once there is a question on how to make slopes of an entrance door? The finishing process is not particularly complicated, and you can handle it, even with a little experience of finishing work. Below, the main nuances and options for creating slopes will be disassembled.

Preparatory stage

Installation of slopes on the front door not only makes the appearance more presentable, but also increases the sound insulation. However, the basic type of work must be preceded by the preparatory stage. Before making slopes of the entrance door, it is necessary to remove irregularities and protrusions, to get rid of voids and to process the opening with a primer. It is desirable to use a good acrylic primer for external work, rather than a more superficial internal impregnation. It is recommended at the preparatory stage to dissolve all power cables and other wiring. All these manipulations are important for the reliability and quality of the installation of the slope. After the preparatory stage, you can start creating slopes. There are several options and ways. On how to make the slopes of the front door, it will be discussed below.

Plaster

You can plaster the walls and then paint them. First you need to remove irregularities and protrusions, then use plaster to level the surface in several layers. You can make it smooth or give some relief. Decorative plaster is suitable for these purposes. After the finishing coat has dried, you can start painting.

Drywall or plastic

Slopes, finished with plastic or plasterboard, look good. This is one of the most economical and fastest options. Installation takes no more than 4 hours, but it should be understood that these materials, although durable, but do not accept heavy loads. Gypsum cardboard is also not intended for use in conditions of excessive humidity. Therefore, this material is good for apartments that are in the entrances of high-rise buildings, but may not be suitable for private houses, where the entrance door goes directly to the yard or to the street. These materials are put on the glue and fastened with dowels.

Tile or decorative stone

Slopes made using tiles or decorative stones are a stylish and durable option. But it should be borne in mind that these materials will cost more than the above methods of creating slopes. However, in terms of quality, beauty and durability, this is one of the best options. These materials are fixed with glue for ceramic granite or wild stone.

Slopes of the entrance door from laminate or MDF

Finishing of slopes with wooden panels, MDF or laminate is relatively inexpensive. Laminate and MDF panels have long been very popular both with builders and with the public. These building materials are durable, easy to install and well suited to any style. Their longevity, perhaps, is somewhat less than that of tile or stone, but this is not too critical. The main disadvantage of these building materials is that they are undesirable to use in conditions of excessive humidity. This greatly reduces their service life. After completion of the installation of slopes, the final stroke is the connection of switches and lighting.