Homeliness, Bath or shower
Modern siphon for sinks
Often, the operation of many devices is hidden from view, and many notice that something starts to happen with a deviation from the norm, only in the event of the device coming out of the system. This can be said about a small gasket that serves as a sealant in mixers and does not allow water leakage when the tap is closed or on the safety valve of a water heating device, the breakdown of which is only noticed if cold water arrives from the tap where the hot water should go.
Modern siphons for the sink differ in their design solutions. So, they can be bottle, corrugated or pipe type. Each of the above species has its advantages and disadvantages.
The corrugated siphon for a sink from a pipe that can be folded must be of an appropriate diameter. Its distinctive feature is the possibility of installing a sink regardless of the location of the sewer. Such a siphon has only one connection with the sink and is located near its outlet. Bend knee to create a water seal is made with a clamp. The negative side can be attributed to poor tolerance of the minus air temperature, restrictions on the drainage of hot water and the fact that the folds of the corrugation very quickly become clogged with grease and dirt.
The installed siphon for the sink with overflow allows you not to worry about the outlet of water over the edge of the overflowed shell in the event that the outlet hole is clogged with foreign objects.
Similar articles
Trending Now