Stirrer for stainless steel mixers

Most often, when repairing a bathroom or kitchen, a hidden tap for mixing faucets is used. It is made using flexible hoses. But what if the design solution involves an interior in an old style, where copper or bronze faucets are used? Or is it not possible to make a hidden water supply system? In such cases, the padding for the mixer is rigid. It is worth considering this topic in more detail.

What it is?

Mixer padding is a product made in the form of a tube with a diameter of 10 mm. For such products are produced adapters, corner connectors, collet connectors. Stainless steel mixers are available in sizes ranging from 200 to 500 mm.

Types of materials

There are several options for the execution of such products:

• Brass is an alloy of zinc and copper. The color is in the range from red to yellow. Good thermal conductivity, resistance to abrasion, resistance to corrosion and high temperatures. If no protective coating is applied, it may blacken over time.
• Copper. The color is golden-red. Has a high resistance to corrosion, but over time, in damp areas can acquire a greenish tint. Excellent thermal conductive and electrically conductive properties. Resistant to chemical attack, mechanical abrasion.
• Stainless steel. It has high anti-corrosion properties and strength characteristics. Has a shiny metal surface.

As can be seen from the listed materials, the feeder for mixers has several advantages.

Advantages and disadvantages

A number of positive properties can be distinguished:

• Resistance to corrosion. This is important for wet rooms, the more so when you use the piping to form condensation.
• Smooth surface. Do not accumulate dirt, it is easy to clean.
• Resistance to chemical attack.
• Presentable view.
• Durability. In comparison with flexible, the service life is 4-5 times longer. The feed for the mixers is rigid and is used up to 20 years. Flexible 3-5 years, depending on the quality and the manufacturer.
• Hygiene. When interacting with water, it does not release harmful impurities into it.

The disadvantages include installation, but this is a controversial issue.

If the pipe size is correctly chosen, then there should not be any difficulties during installation. The price for such products is much higher than the cost of analogues. But taking into account the service life, we can say that the cost justifies itself. Mobility - in case you need to move the plumbing or household appliances, you need a thorough rework. As you can see, the dignity of the hard cabling is obvious.

Scope of application

Stainless steel mixers are used not only for domestic purposes, but also for institutions that are subject to increased sanitary requirements. This is due to the fact that the surface is smooth and conveniently washed. If we consider flexible liner, then it has an interlaced or corrugated structure, in which dirt and dust can accumulate. The use of pipes is most often done in the following areas:

• Medical institutions: hospitals, sanatoriums, polyclinics, laboratories.
• Children's institutions: schools and kindergartens.
• Sports and health centers.
• Stations, airports.

This is only a number of establishments using such a line.

Very popular is the use of such products for domestic purposes. Cranes made under the antiquity have a beautiful view, and to complement this effect, some designers use open-end liner, made in the same style as the mixers.

In the kitchen, the intensity of the use of water supply implies a greater likelihood of equipment wear, plus the room itself is an aggressive environment. Care for furniture and equipment should be as comfortable as possible. Therefore, the padding for the mixer in the kitchen of a hard view is the most optimal option.

Nuances of selection

There are a number of subtleties for the selection of stiff eyeliner:

• Exact size. Deviation in greater or lesser side will entail difficulties with installation. Therefore, before buying should make accurate measurements. Also it is necessary to pay attention to the diameter of the fittings. They must match the size of the main line and mixer.
• Manufacturer. Before buying, you should review the reviews and options.
• Material. It all depends on the design idea and the price category, as well as visual preferences.

In general, the main difficulties can arise during installation.

Installation

As with conventional water supply, there are two versions of the system - hidden and open.

For the first one, you will have to trowel the walls, or sew them in plasterboard boxes. For open piping, provide a fastening system to the wall.

Before installation, the layout of the planned wiring is done. After the pipes are held, the masters install the old mixer and collect the entire system. Then all the fittings with the winding of the foil tape or the pakli are fixed. If the liner is hidden, then seal the stitches with plaster. The time is allowed for the solution to solidify. Unscrew the old mixer and mount a new one. Turn on the water, check for leaks.

Installing a completely new system is much easier than replacing flexible hoses with rigid hoses.

Replacing the old eyeliner

In the event that the decision is made to change the flexible liner to a rigid one, you should select the pipes of the required length. If the size is non-standard, you should make a cut to the desired parameter. Then through the collet to connect. The details are worn before cutting.

There are cases when the length is less than necessary, you have to weld or buy a new one.

As a rule, the installation of rigid cabling is trusted by professionals, due to certain difficulties. An experienced master will determine how best to install with minimal risk of damage to the product.

Manufacturers

The market is replete with firms that specialize in the production of elite liners. One such manufacturer is Grohe (Germany). The "Groe" mixer feeder differs in ergonomics, reliability and durability.

The manufacturer himself recommends, for Russian operating conditions, to install a water purification filter before fitting to maintain the reliability of the water system.

There is another well-known manufacturer of this type of piping - Remer (Italy). This company has long been on the market and has a full production cycle. The quality control begins with the evaluation of raw materials and is monitored throughout the production cycle of the product. That's why the piping for copper mixers Remer has established itself as a quality product.

When buying such systems, you should pay attention to the completeness.

Branded original podvodki have a complete set, including gaskets. Counterfeits can be incomplete.

Cost and Feedback

The price of hard-wiring varies from 1200 rubles and above. This cost is due to the high cost of material, in the first place. And, accordingly, the products of well-known brands will include the price for the brand itself. But it guarantees the quality of the products.

According to reviews, the main problem of installing such systems is precisely the fit of the size. Otherwise, consumers confirm the reliability and durability of such systems.