Making fishing gear for your own hands

Making fishing gear is not only a useful activity, but also an exciting hobby. In addition, fishing for homemade tackles will bring much more pleasure than those that were bought in the store. Making fishing gear for your own hands excites the desire to make something useful to deceive the cunning fish, and in this way you can save considerably.

Making a tackle on a carp

Carp is a fairly cunning fish, so you need to carefully prepare to return home with a decent catch. The most popular tackle on carp is a balalaika or postavusha. It's quite easy to make such a tackle on a carp with your own hands. At the same time, it can be applied at various depths and with a flow of different force. To make the tackle, you need a piece of foam plastic, a 0.4 mm thick fishing line, a nylon thread, a weights of about 150 g with a small hole, a hook, a carbine, a knife, an insulating tape and a piece of plastic 4 cm long.

The production of gear takes from 15 to 30 minutes. As a float protrudes polystyrene, which is equipped with a lock. To the float it is necessary to tie the fishing line, at the end of which the lead sinker is fixed. The weight of the load depends on the strength of the flow, so it is better to take with you several pieces of different sizes. The hook should be fastened on a sufficiently long leash. For such a tackle, it's best to use boiled peas as bait.

Making gear on carp

To catch carp is important to carefully select gear. For such fishing, equipment of various manufacturers and modifications is used. However, in some cases it makes sense to make a tackle on the carp for yourself. In this case, it is possible to take into account all the features of catching fish in a water body of a certain type. The most commonly used is the float tackle. However, for some types of reservoirs, you can also use the bottom. When making gear, it is very important that all its elements are strong enough, but at the same time resilient.

Weight carp can reach 4 kg, so it is very important to use a quality coil, as well as a strong fishing line. In this case, you can make such a tackle on the carp for yourself, like a rod. For this rod it is necessary to use a coil of impressive dimensions. Hooks of different sizes can be used, but they must be strong enough to withstand large fish.

Fabrication of "rubber band"

A feature of tackle "rubber band" is that the load is attached to a special shock absorber, and not directly to the line. Consequently, the elastic band can stretch, so you can remove the hooks from the water, throwing the sinker. Is made tackle "elastic" with their own hands simply. For this, we need a fishing line, hooks, a sinker and, of course, an elastic band. In addition, additional elements will be needed, for example, a bell and a carbine with a swivel. To calculate the length of the required gum, it should be taken into account that it stretches four times. The length of the leashes is about half a meter. It is best if the shortest leash is closer to the elastic band. The line should be used sufficiently strong, with a diameter of about 0.4 mm. To attach the fishing line to the rubber band, it is recommended to use a carbine. For long-distance casting, use a weights of about 1 kg.

Such tackle allows catching both peaceful and predatory fish. In addition, it is quite simple, so even a novice fisherman can use a rubber band.

Tackle "The Murderer of the Fowl"

Popular tackle "The murderer of the crucian carp" is a combination of cargo with feeders. You can make fishing tackles with your own hands, which will not yield to the quality and functionality of the factory.

It's quite easy to make such a tackle. This will require 3-5 feeders, which will also work as a load, a thick fishing line or cord, hooks and fishing line. Feeders must be fixed on a braided cord or a thick enough line. In this case, they should be located at a distance of 20 cm from each other. The last feeder should be the heaviest. If they are all of the same weight, at the end of the tackle you need to hang the sinker. Thus, the snap will not get tangled when cast.

Hooks are attached on leashes, the length of which should not exceed 6 cm. The size of the hooks is chosen depending on the type of fish. Making fishing gear for your own hands takes about half an hour and does not require special tools and expensive materials.

Advantages of self-made gear

1. Saving. Making gear with their own hands is much more profitable than buying branded equipment. In this case, you can use the available materials, which every fisherman has.
2. Functionality. You can make tackles that are ideal for a specific type of fishing in a pond that has a certain depth and strength of flow.
3. Pleasant leisure. Making fishing gear for your own hands is also an interesting pastime, which can bring more pleasure than fishing.