"Litol-24": characteristics and features

"Litol-24", the characteristics of which will be presented below, is a multi-purpose universal lubricant based on lithium. The composition is resistant to water, and is produced in accordance with GOST 21150. The mixture can be purchased in a different volume, which varies from 0.5 to 170 kg. The most common among consumers are barrels, which contain 170 kilograms, as well as drums, the capacity of which can vary from 8.5 to 45 kg.

general description

Litol-24 lubricant, the characteristics of which you should be aware of before purchasing, is the composition for all kinds of friction units of mechanisms by the type of reducers and bearings. The product is used for various devices that operate on caterpillar or wheel drive. A mixture is used in various components of industrial equipment, namely boring machines, drilling and rolling mills. In industrial order, "Lithol" can be used in the nodes of ship equipment.

Application

"Litol-24", the characteristics of which must be known to the consumer even before the purchase, is considered one of the most popular lubricants in its field. The prevalence is due to excellent performance characteristics, because the lubricant can be used for a wide temperature range: from minus 40 to plus 120 degrees. The temperature of the thermometer can reach 130 degrees, but this effect should not be long. Viscosity is a limit of 60 to 72 mm square / s, which is true at 50 degrees, the composition has a high dropping point, as well as a low volatility. "Litol-24", the characteristics of which are presented in the article, proved itself at various speeds, temperature environments and loads. The lubricant acts as a chemically stable compound.

Basic properties

"Litol-24", whose characteristics are quite impressive, is described as a homogeneous medium having a viscous texture and a light yellow or brownish hue. The smell is oil. The composition does not apply to substances that are dangerous to humans, it belongs to the fourth hazard class on the effects on the body. However, in carrying out work, individual protective equipment must be used according to state standards GOST 21150-87.

Warehousing must be carried out according to the rules of fire safety, since the substance acts as an oil synthesis product, this indicates that the product is fire hazardous. Ignition occurs at 250 degrees. The equipment in which this lubricant is used must be grounded.

Additional Properties

"Litol-24", the characteristics and application of which are described in the article, has considerable mechanical and thermal stability. The product shows water resistance even in boiling water, and when heated, hardening does not occur. "Lithol" reliably protects metal products from corrosion, and also has excellent conservation characteristics. Among the features can be identified the strength of shear and tear, as well as good sealing qualities.

Features of storage

"Litol-24", characteristics, the prices of which must be known to the consumer before purchasing the goods, can be stored for 5 years after the date of manufacture. While the cost is 980 rubles per 10 kg, the price for different manufacturers may vary. After the warranty period has been completed, the lubricant can be used for its intended purpose, but it must comply with the specifications for the described product.

What is important for the master to know before using

At a temperature that is equal to 20 degrees, the ultimate strength of the described material is from 500 to 1000 Pa. If the temperature increases to 80 degrees, then this figure is equal to the figure of 200. At 120 degrees, the evaporation is 6%, but no more. The mass fraction of water in the composition is absent, while the percentage of mechanical impurities in percent is equal to the index of 0.05.

Conclusion

When using lithol, it is important to try to observe the rules of industrial and personal hygiene, this will guarantee environmental safety, as well as preserve human health.