What is and how to install a bath device?

Not so long ago, the body cooling procedure when visiting the steam room required the preparation of numerous tanks with cold water. Today, for this purpose, a special bathing device is most often used, which is presented in the form of a bucket installed on movable brackets. The capacity is automatically filled with tap water after each use.

Principle of operation

Pouring device for the bath functions due to the application of the principle characteristic of the drain tanks. The cycle includes several stages:

1. The emptied tank is filled with tap water by opening the ball valve. When the maximum level is reached, the flow is blocked by a float switch.
2. The container is tipped by the tension of the chain or rope. The float moves downwards, which leads to the next filling of the bucket or bucket.
3. If necessary to prevent emergency situations, the water tap is shut off.

Pouring device for the bath with your own hands

To make a device for dousing with cold water, you need to prepare a roomy wooden, plastic or metal bucket that is suitable for mounting the float switch. Also, reliable brackets are required that can withstand the weight of the container filled to the top with water.

Connect the bath device to the water supply with a flexible hose connection . The source of water can be not only a centralized pressure system, but also a bulky tub, a barrel, a well or a well. However, this will require the installation of a pump, which will ensure the rise of liquid through the hose.

Differences in the design will be due to several factors: the material of the container, the source of water, the nature of the walls in the room, to which the fasteners and brackets will adapt.

Features of operation

As well as the capacity for steaming brooms, a pouring device (in the bath real professionals try to buy everything) needs special care. Despite the presence of the float valve, which ensures the replenishment of the reservoir with water, the walls of the wooden bucket, taken as the basis of the device, may dry up. In turn, this leads to leakage, and eventually - to the need to replace the tank.

In order to use the bathing device for a bath for the longest possible period, it is necessary to avoid blocking the shut-off valve during bath procedures. A few hours before heating the steam room, it is recommended to fill the container with water. Thus, the wood will swell, which will lead to the elimination of gaps and cracks in the construction in a natural way. True, these recommendations do not apply to the use of devices in the form of a plastic or metal container.

Eventually

Installation of a bathing device in a bath is an excellent solution that will allow you to diversify water procedures in the presence of a swimming pool or it will become a good alternative to the latter. Among the positive effects of abrupt cooling of the body with water, we can note not only a whole lot of positive emotions, but also an increase in immunity, strengthening of the cardiovascular system.