HomelinessRepairs

Lamps in the suspended ceiling: choice, installation instructions

The finishing of ceilings has long ceased to be associated with painting and the use of whitewash. Modern apartments are increasingly designed taking into account the installation of tensioning cloths, which differ aesthetic appearance and resistance to physical influences. Parallel to this, the technologies of lighting systems are being improved , which is evident in the example of LED devices. The combination of two innovative solutions makes it possible to provide a stylistically original effect. You just need to choose the appropriate design concept and build in the suspended ceiling light, taking into account the technical nuances. The market offers a variety of options for devices that differ not only in appearance, but also in the way they are installed and light is supplied.

Choice of traditional lighting fixtures

If the modern ceiling designs, despite the high cost, quickly settled down to the average citizen, then the new lighting equipment does not yet have a noticeable advantage over the classical solutions. Therefore, for stretch designs quite often use the usual chandeliers and lamps with incandescent lamps, as well as halogen and luminescent models. There are no particular obstacles to such a combination, however, some features of operation should be taken into account.

The fact is that the canvas used in the decoration is sensitive to thermal influences, for this reason, even at the stage of installation, a thermal insulating ring should be provided. This addition will protect the tensioning structure during lamp heating. However, you can do without a thermal insulator, if the power of the lamp does not exceed 20W. Such models are usually used for small rooms. For example, for a nursery, a study and a bathroom.

LED Lighting Ribbons

A worthy competition to traditional light sources is diode tapes. In this case, you can expect to receive a soft diffused lighting, which is optimal for living rooms and rest rooms. The greatest effect is achieved if such tape is provided for on a high ceiling with matte coating. But this option requires a competent performance of electrical installation works, since LED lamps for ceilings in the form of tapes represent a whole complex of light bulbs. The main task is to ensure the optimal operating mode of each light source in such a way that a sliding light effect is created. In other words, a smooth and balanced surface coverage with soft light should be obtained. The color of radiation can be any, in this respect, manufacturers do not stint on the variety of decorative solutions for LED strips.

Special lamps in the suspended ceiling

For those who want to initially insure against the risk of errors in installation, it is worth recommending special luminaires designed for installation in the ceiling with a tensioning structure. At once it is necessary to underline, that on operational properties and external execution it can be quite habitual model reminding classical devices. There are a lot of original solutions. For example, the candle-ball organically fits into the canvas, providing a pleasant and unobtrusive dispersion. A feature of such devices is the design, designed for installation in a ceiling tensioning niche. For this, the designers assign the lamps the possibility of adjusting the reflector horizontally and vertically. Also there are devices with moisture protection and steel materials in the case.

Spotlights

Firms that specialize in stretch fabrics often offer as an additional service the installation of spotlights. This solution is really very profitable for both aesthetic reasons and reliability of the construction. The device, which is heated to the ceiling, is characterized by its small size and the ability to create interesting highlights in the adjacent area. But if you install spotlights in the stretch ceiling of a spacious and high room, then the amount of radiation may not be enough. This is one of the main disadvantages of such devices. They are good as an element of decor, but as a full-fledged light source for large rooms are not suitable. The output can be a combination of point devices and a full-fledged chandelier.

Classic installation of fixtures

A feature of the installation of traditional luminaires is that the attachment point is provided with the necessary fixtures even before the installation of the tension web. A typical example is when a hole is first drilled and a hook is attached, and then the ceiling is installed. Further, in the canvas a cut is made through which the cable is carried. After that you can fix the chandelier. There are other ways of fastening. For example, a lamp-ball can provide a planned installation. In this case, you must first install a wooden bar, which will coincide with the tension cover. The rest of the work is done in the usual way. There are other approaches to installation, but all of them provide for a close interaction of the fastening system and the ceiling structure already at the level of the rough surface.

Installation of recessed luminaires

This type of installation is less troublesome, but requires accuracy and accuracy. After the tensioning sheet has cooled down and has found operational properties, you can start work. At the site of the future installation a special rack is mounted. Next, a circular profile is applied to it. On the contour of this device is cut out a piece of cloth, which is glued to the post. This will enable you to conduct the cable and make the connection. It should be noted that the installation of recessed luminaires allows the realization of a lot of decorative solutions during the installation phase. In particular, the hole formed for the wiring can be decorated with edging or framing from heat-resistant materials. Also, the profile itself can carry an aesthetic function.

What to consider in the process of operation?

Special requirements for the care of luminaires in the stretch ceiling does not exist, but it is desirable to observe general requirements. The area with fastening must be protected from dust and moisture. When performing repair work it is recommended to protect it with a casing or a special film. That chandeliers and fixtures have served longer, experts advise to use damping materials in the niche of a ceiling. However, this function is usually performed by heat or noise insulator, which is laid in the basis of the design. Thanks to these materials, vibration is reduced, which increases the working life of the luminaires.

Conclusion

The use of tension strips is aimed at performing decorative functions. Therefore, the fixtures in the suspended ceiling should be installed as a stylistically appropriate addition. The assortment of offers on the market of lighting devices is so wide that a model suitable for the shape and color can be found for any room. Do not forget the design features. For example, the possibility of adjusting the reflector, the presence of thermo-insulating materials in the case, the compact dimensions go only in plus to the light source for the tension ceiling.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.