HomelinessRepairs

Than to warm a ceiling in the private house? Material selection

Many owners of private homes do not even realize that the greatest heat leakage occurs through the ceiling. This fact can be explained quite simply: the air heated in the room rises upwards and through the cracks between the slabs comes out. Thus, about fifty percent of the heat is lost. Therefore, the owners of estates should think about how to insulate the ceiling in a private house. After all, this way you can save a lot on expensive energy.

Than to warm a ceiling in the private house: a choice of a material

Mineral wool

This insulation is made of artificial fiber. As a raw material for the production of material use limestone, basalt, dolomite. The undoubted advantage of mineral wool is its durability, low hygroscopicity and the ability to withstand the flame.

Styrofoam

This material is made from a foam made from ordinary plastics. It is distinguished by its lightness and lightness. In addition, it is convenient in transportation and installation. Among the positive qualities of this building material is a good heat and sound insulation.

Penoizol

This is called liquid foam, which is characterized by a relatively low cost. If you are thinking about what to insulate the ceiling in a private house, then this is a worthy option. Penoizol perfectly fills all voids and perfectly protects the room from low temperatures. However, it is very difficult to pour a liquid foam plastic on its own, for this purpose specialists will need help.

Ecowool

This insulation is based on cellulose. It is mounted in the ceiling with the help of special equipment. The material consists of fine wood fibers obtained by processing waste paper. Ecowool is characterized by increased thermal insulation and relatively inexpensive cost. However, with a dry installation of the material, a strong dustiness of the room may occur.

Expanded clay

Frost-resistant material. Its main component is clay, which is preliminarily fired in an oven. It should be noted that to warm claydite can only be fairly solid construction, able to withstand the additional load. This material is much heavier than mineral wool and foam. After studying the characteristics of the main materials, it will be easier for you to make a choice of what to insulate the ceiling of a private house.

Technology

It seems to many that it is almost impossible to do this on your own. However, in practice, everything is not so difficult. How to insulate the ceiling in the house? First, the vapor barrier material should be laid . Typically, polyethylene film or polypropylene is used for this purpose. He will keep the heat rising up. Also suitable is a glassine or other rough film on one side. The vapor barrier material must adhere well to walls and beams. Next, a heater is attached (minvate, polystyrene, expanded clay, ecowool). Fixation of the material to the surface of the ceiling can be carried out both by gluing and mechanically (using fixing fungi). At the end, the ceiling is covered with plasterboard, plastic or other finishing material. And do not forget to make holes for the lamps. Now the question of what to insulate the ceiling in a private house, will cease to be a problem for you.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.