Instructions for using the washing machine: highlights

Each house has washing machines. They can be automatic or semi-automatic, with drying, spinning and other functions. They also differ in their technical characteristics, dimensions, design. In the kit there is always an instruction for using the washing machine and a warranty card. It is recommended to study in detail all the information that is provided in these documents.

In short, the manual tells about the main advantages of the chosen model, safety rules, specificity, installation, preparation for washing, programs, maintenance, problems and their elimination. It is useless to retell the whole instruction, however it is worthwhile to pay attention to important aspects. After all, it is in the instruction that it is described how to wash in a washing machine so that it works without breakages for a long time.

Installation and connection

The first thing to begin with is to check the equipment. To any washing machine are attached jellied and drain hoses, fastening, wrench, transport bolts. After the device was delivered home, it is necessary to release it from the packaging. After performing uncomplicated actions, unscrew the bolts that hold the drum during transportation.

Now you need to use the washing machine. It is necessary to find the item "Installation". It talks about the most optimal place and main points, such as:

• The slope of the floor should not exceed 1 °.
• The socket is installed no further than 1.5 meters from the device.
• It is not recommended to connect other appliances to the outlet while the washing machine is in operation.
• The device is installed in such a way that the sides are about 2 cm apart, and 10 cm from the back panel to the wall.
• A small drop on the floor can be leveled with the legs.

In order to connect the washing machine to the water supply system, only new hoses should be used. The optimum pressure is 30-1000 kPa. If it exceeds the maximum, it is recommended to use a special device to reduce it.

The gasket and the filter must be installed on the water inlet hose. Drainage can be connected directly to the central drain pipe or use a special attachment for the bathtub or sink.

Control Panel

Each device is equipped with a power button. The washing machine turns off automatically. In some models there is a "Start / Pause" button. Thanks to it, the cycle of washing can be suspended without knocking down the settings.

To change the temperature mode, there is a button or a regulator (depending on the brand). Some manufacturers equip their instruments with additional functions, for example, selection of the spin level, preliminary washing, intensive rinsing, cleaning the drum, the "no folding" mode. Detailed information on their appointment contains instructions for using a washing machine of a certain brand.

Also in all modern devices on the control panel there is a mechanical controller for selecting automatic programs. As a rule, there are at least 10. After switching on the device, a mode is chosen in which the optimal temperature, spin speed, rinse duration for a certain type of fabric is already programmed.

Troubleshoot problems

The most common problems of all washing machines are leaks, problems with water supply, stopping the drum. How to solve them, the instruction on use of the washing machine will help. In it there are tips that help specialists without understanding the problem. For example, if the drum stopped during the washing process, then the balance was probably broken. In order to correct this mistake, it's enough just to straighten things up or add a couple of others.

Sometimes washing machines do not start at all. This does not always mean a serious engine failure. Most often, the reason is a weak water supply. In order to start the machine, it is enough to clean the filters.

Selection of detergents

Currently, a large number of various detergents are sold in stores. They differ not only in manufacturers, but also in designation. Some are used for manual washing, others are used for the cleaning process performed by an automatic washing machine. Powder with reduced foaming, air conditioning, water softener are poured into a special compartment. It is important to note that there are three divisions in the box:

• One of them is intended for the "Prewash" mode.
• The second is for the powder (main cycle) and the water softener.
• Third - for the air conditioner.