How to sew Roman curtains with your own hands?

Today we will try to sew Roman blinds with our own hands.

First you need to understand what Roman curtains are, what fabric they should be sewn, what will we need in the process of work and, of course, how to sew a Roman curtain? Let's start in order. Roman curtains - a kind of curtains, come to our modern life from ancient Rome. They are very simple to perform, but at the same time very original. This is what allowed them to become an original part of the most diverse interiors. Classical Roman blinds are made in the form of flat cloths, evenly applied if necessary to each other with a chain mechanism. Such curtains distinguish the clarity of the lines, created by the use of small slats. Sew Roman curtains with your own hands can be made from almost any fabric, both heavy and light. With her help, you can save on the consumption of cloth, and Roman curtains with their own hands will be indispensable in the office, in the kitchen, in the children's room. Today's trend of fashion - a combination in the design of curtains and Roman curtains. In conclusion, the Roman curtains - curtains, which are straightened on the window in the form of a flat screen, and if necessary going up in the form of folds - is an interesting option for decorating your apartment, so many mistresses are asking questions about how to make Roman blinds yourself.

In order to sew Roman curtains with your own hands, you need the ability to sew, patience and desire. And I'll try to detail the process of how to make Roman curtains by yourself.

Before sewing a Roman curtain, you need to make chalk, temples, good scissors, iron, fabric for the front side, lining cloth, for example, thin viscose or cotton, matched to the front, rings, sewing machine and overlock and clothesline .

In the beginning, as with any tailoring, you need to remove the "measurements", i.e. Determine the size. We will measure our window in width and length. It is important to make allowances for processing the fabric along the width and the bottom edge of the fabric (about 2 cm). By calculating the required length, it is important to consider the number and width of the desired folds, which depend on the depth of the alleged falld.

The next step is to cut the lining and fabric on the front side of the curtains. The edges need to be obverlozhit. Next, you need to iron the fabric, prepared on the front side of the curtains, for the width of the intended bend. Then we will decompose the facial fabric with the wrong side upwards and put the lining fabric face up on it, thus we will connect the wrong sides of the prepared cloths. After that, between the ironed bends, it is necessary to pass the adhesive tape. After completing the tape along the entire perimeter, iron the edges in order to glue the two sheets together.

On the bottom edge of the finished fabric you need to make a double bend, ironing it with an iron and pins on pins. In the upper part of the canvas you need to plan a place for the crossbar. Having lost the produced bend along the upper edge, we go down by 8 cm and, having deviated from the edges by 1 cm, we plan places for the first rings. The subsequent places of the rings are outlined along the sides of the curtains, retreating approximately 16 cm apart.

Further, on the lining fabric we plan places for the strips, placing them at a distance of 20 cm. To the lower edge, evenly we narrow narrow strips of fabric, sewing at the same time bending. Then we pin them vertically to the places for the rings on both sides of the curtains, forming at the same time the tails.

Then we will fold the fabric along the front side along the horizontal lines and attach the tapes to the canvas. In this case, the rings, attached with pins, remain on the other side, they need to be sewn by hand to the sewn strips. Then you need to remove the excessive length of the bands, cutting off the ends and attaching them to the fabric, covering it with an overlock.

Now you can fasten the upper part of the curtains over the crossbar, and at the same level with the rings on the bottom of the crossbar you need to attach the hooks.

A thin rope is fixed on the lower ring and one end is passed upwards, through the rings on one side, and the other end is fastened to the opposite lower ring and dragged up through the rings. Next, the rope must be hooked along the bar. Thus, we created a lifting mechanism for curtains. You can tie the ends of the ropes to a knot, securing them together below the hook level.

To fix the level of lowering and lifting our curtains, we will need to screw another hook, on which we will wind the ends of the ropes.