Fashion, Clothing
How to measure the shoulders for tailoring or choosing clothes?
Measuring the width of the shoulders
The main dimension related to this part of the body is the width. If you do not know how to measure the shoulders and where to start, it is first of all to learn the width of the shoulders. This is the simplest point in the measurements, since you only need to attach one end of the measuring tape to the edge of one shoulder, and then measure the distance to the edge of the other shoulder. This is called the width of the shoulders. At the same time, you need to make sure that a person does not hump, slouch or spread his shoulders too widely - they should be in a natural state so that the measurement is as accurate as possible. By the way, knowledge of the width of the shoulders can help you not only in choosing clothes in the online store or when sewing your own, but also in sports, since very often there is used the position of "feet on the width of the shoulders". And if you know how to measure the shoulders, and what their width is, then it will be much easier for you to accept this position.
Shoulder Cover
Another important parameter that you need to be able to measure is the circumference of the shoulder. It is necessary for the sleeves to turn out to fit, not too narrow or too wide. Therefore, everyone should pay special attention to this aspect, studying how to measure the shoulders. The main point in this case is the correct choice of the measuring point. In fact, shoulder coverage is not quite the right name, because the coverage of the forearm is measured, but in reality the name plays no role. And what is important is that this parameter must be measured in the widest part, that is, on the bicep. It should be noted that the hand should be in a relaxed state, freely stretched along the body. Straining muscles in the process of measurement is not necessary, since in this situation the sleeve will be much wider.
Measurement of shoulder length
Another parameter that you might need is the length of the shoulder. Given the fact that there is also a neck between one shoulder and the other, you will not be able to divide the width of your shoulders in half to get each figure separately. Therefore, a separate measure was introduced-the length of the shoulder. It is measured from the base of the neck to the end of the shoulder, and again you should do several measurements to get a more accurate figure and not make a mistake. In clothes, the length of the shoulder can differ from your anatomical indicators - it depends on how you want to sew a garment.
Single parameter
These are the three main parameters that are the keys to how to properly measure the shoulders. But there is an additional aspect that does not require a measuring tape, because it needs to be measured visually. This is the inclination of the shoulders. This parameter has only three values, but it can greatly affect the sewing process. In this case, you do not need to be a genius to understand how to measure the shoulders and their inclination. It is enough to know that the standard degree, under which they are located, is somewhere between 20 and 25. Such figures are recognized as normal, while a larger angle means sloping shoulders, and a smaller one is square. This parameter is also worth considering when choosing clothes remotely or when sewing it yourself.
Similar articles
Trending Now