How to make a boat out of plastic bottles

Spring is the traditional time of the beginning of the fishing season. And what kind of fishing without a boat? How to make a boat from plastic bottles, you will learn from this article.

Necessary materials

In order to start making your boat, collect all the suitable material. It consists of roughly the following basic elements:

1. Plastic bottles. They need to be collected as much as possible. It's good if they are large.
2. Scissors or sharp knife.
3. Adhesive tape.
4. Thin wire.
5. Wires made of wood or plywood.

Boat by the hands: stages of work

We will tell you step by step how to make a boat yourself. Phase one involves preparing bottles for use. Wash them, clean them from stickers and the glue itself, if necessary using a solvent. Then fill the bottles with air under pressure so that they do not deform.
The bottles are placed in the freezer. After they are filled with cold air, it is necessary to screw them with covers. When the bottles are moved from the freezer to the heat, air is expanded. Thanks to this, the bottles are no longer deformed. When all the procedures are done, put the lids on the glue on the glue, and it's best if the glue is water resistant.

So, how to make a boat with your own hands? In describing the second stage, everything will become somewhat clearer. You will need to collect plastic bottles in so-called "logs". The first two bottles are fastened with bottoms: the protrusions of one connect with the depressions of the other. For their communication, a third bottle is used, the frame of which is stretched on the other two. Scotch joints connect the joints of containers. At this stage, you already understand how to make a boat. You see that it is simple and inexpensive.

To continue, you need two more bottles to cut off the neck. Each of them is put on already sealed bottles from its side. The joints are joined and sealed with adhesive tape and glue. As a result, a blank was obtained with bottoms at both ends. As in the first stage, we connect the notches and protrusions. So you can get whole "logs" from plastic bottles. Surely the question of how to make a boat by yourself, does not frighten you now.

The third stage begins with the connection of the "logs" into the floats. In one float there must be eight. "Logs" are fastened by means of an adhesive tape, a wire, it is possible to use also waterproof glue.

Now, when the work is almost complete, you can brag to your friends and tell them how to make a boat yourself. Only one step separates you from the victory. It remains to assemble the boat itself from its component parts. They are fastened with cross bars. Assembly schemes and frameworks are very different. It depends on which model of swimming equipment you are going to make. If desired, the boat can be lined with sheets of plywood, paint it, or draw something.

Now you know how to make a boat out of improvised means. It does not cost a lot. Most often make rafts or simple boats, but from plastic bottles you can make even a yacht. Show your imagination and make your boat unique, such that at the sight of which your friends and relatives will be delighted.