HomelinessTools and equipment

How to connect a socket for the Internet and phone?

In today's world, a house is rarely found, to which wires from the telephone network or the Internet are not connected. To use these communications was convenient, you may need to connect them through a special outlet. In addition to the special shape of the connector, it has certain qualities and an internal device.

Connect this outlet is not difficult. Therefore, all actions can be performed independently. How to connect an outlet for the Internet, will help understand the instruction and recommendations of experts.

Accurately carrying out the sequence of actions, and also following the safety rules, you can make a connection qualitatively and quickly.

general characteristics

Before you consider how to connect an outlet for the Internet, you should say a few words about the features of its device. The main difference is the presence of a twisted pair of wires. There are only 4 of them. Accordingly, the socket accepts 8 rods. They twist, interrupting electrical noise.

This allows you to achieve high quality communication, as well as a good data transmission speed (up to 1000 Mbps). The connector, which is used by different manufacturers in similar outlets, is called RJ-45. It is present in the overwhelming majority of submitted products.

This input is applicable for connecting a wire from the Internet or a landline phone. The connection is made according to a specific instruction.

Preparatory work

Before starting work it is necessary to prepare all improvised tools and materials. In the wall with a perforator with a round bit drilled a place to install the jar.

Considering the question of how to connect a socket for the Internet and phone Schneider, Legrand, you should know the general principle of this process. At the preparation stage, all actions will be the same.

After drilling a hole in the wall, the installation site is thoroughly cleaned of construction debris. The receptacle is installed in the recess. To fix it, an asbestos mixture is used.

Next, you need to pay attention to the outlet itself. It will need to be dismantled. In the manufacturer's instructions, this process is described in detail. But the principle for all outlets is approximately the same.

Disassembly of sockets

When studying the question of how to connect an outlet for the Internet, you should familiarize yourself with the principle of disassembly. There are mixed varieties of presented products. There are also connectors designed exclusively for connecting the cable from the Internet. Also there are such types of sockets that allow you to connect several computers to the network. It is convenient for offices, industrial premises. In this case, all the wires will be located in their places, will not be confused under their feet.

Disassembly of any sockets is identical. The product turns to itself with the back side. There is a special lock (a lock ring). It is turned clockwise. In this case, the control mechanism is separated from the terminals. Then the process of connecting the wires takes place.

Wires and contacts

When considering how to connect a socket for the Internet Legrand, Schneider and other manufacturers, you need to understand their scheme. There are terminals at the back of the product. They are marked with special colors. Each of them clearly corresponds to the color of the conductor.

Before connecting, the cable is not cleaned from insulation. Only the common protective tube is removed, in which the contact pairs pass. The clamping mechanism of the terminals is arranged so that it correctly cuts the sheath of the core. So contacts come directly to the material of the conductor.

When cleaning insulation, there is a high probability that the core will be damaged. There are 2 basic circuits for connecting wires. They are called A and B. The choice depends on how the service provider brings the network to the consumer. Therefore before installation it is necessary to consult with the provider about the scheme of their conductors.

Socket connection

Considering the question of how to connect an outlet for the Internet Schneider, Legrand, it is necessary to refer to the manufacturer's scheme. The wires are individually connected to the terminals corresponding to the color. Then they are tightened, allowing the contact pads to touch the core of the conductor.

Next, the system is checked by connecting a router or a computer to it. If everything works correctly, you can install the design in a junction box. The procedure is similar to disassembling the outlet. The retaining ring is tightened. The front panel is in place.

To strengthen the fastening of the wires in the terminals (if desired), a special tool is used. Professional installers also have an indicator in the arsenal. It allows you to determine exactly which terminal is connected to a particular wire.

Connecting the SAT3 outlet

If you need to figure out how to connect the socket for the Internet and phone, you should familiarize yourself with the simple instruction of this process. In this case there are several features. The correctors are most often produced by the French company Legrand. Its clamping mechanisms are related to the development of a new generation.

The reliability of the brand was appreciated by users of our country, as well as residents of near and far abroad. For example, you can consider how to connect an outlet for the Internet Legrand Valena.

The telephone wire consists of 2 contacts. But the terminals, for obvious reasons, more. To find the appropriate connection points, the wire must be exposed. It is better to do this with a cigarette lighter. After that, the vein is applied to the contacts until a horn appears in the tube. Then the procedure takes place according to the technology presented above.

Schneider outlets

If, for example, you want to know how to connect an outlet for the Internet to Schneider Electric Glossa or another model of this manufacturer, you need to take into account a number of their features.

The presented brand is known all over the world due to the special features of its products. Such sockets for the Internet allow you to connect several computers to the network at the same time.

When designing a future system, take this into account, taking several separate wires to the place of feeding. This system is suitable for office premises, as well as for people who have several computers at home. In this case, the need for a router disappears.

But if the owners of the house want to use portable laptops, as well as the Internet on the phone and other devices, it is better to give preference to a stationary device that distributes Wi-Fi.

Connecting a two-channel power outlet

In search of an answer to the question of how to connect an outlet for the Internet with two standalone cables, please read the manufacturer's instructions. From the junction box , two wires are immediately delivered. They remove the protective layer (about 4 cm).

All wires are distributed to separate 8 contacts. Using a thin screwdriver, without stripping the wires, they are fed into one and the other terminals. Then the clamping procedure takes place. After this, the connection is also checked for correctness. Computers include and evaluate the work of the Internet. If everything is working correctly, you can install the system in a jar.

To do this, the reverse action is disassembled. Also, the circlip is turned back. Such work will not take much time. But if you have special tools, you can perform all the actions even faster. Therefore professional assemblers necessarily have in their arsenal a full set of tools necessary in the work. For a one-time connection, it makes no sense to purchase an expensive tool. It will be enough to prepare its universal varieties.

Having become familiar with the technology of how to connect an outlet for the Internet, you can perform all the actions correctly and efficiently. Knowing the detailed instructions, even a master with minimal experience will be able to perform work qualitatively.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.