How to adjust plastic windows.

Repair is not just a change of scenery, but also a very important matter. Especially when it comes to interior decoration. It is important to combine practicality and aesthetics, which will create an atmosphere of home comfort and comfort. That's why most often use plastic windows. Now the question arises as to how to regulate the plastic windows. It usually comes up after installation or after a certain period of operation. If it concerns the first case, then it is urgent to contact the company whose services you used when installing plastic windows.

The company always guarantees the quality of its work, and therefore the regulation of metal-plastic windows is carried out by highly qualified specialists.

If we are talking about the second option, that is, there are problems after a few years, then you can carry out an independent repair of plastic windows. To do this, you can use a tool with a tool - a screwdriver and hex.

How to adjust plastic windows? Here are some useful recommendations that have already proved useful in practice.

If there is a problem of closing, when the leaf clings to the frame, then it is worth adjusting.

First, pay attention to the upper loop of the hardware. It is also the mechanism of reclining. This loop is where the leaf is attached to the plastic frame and adjusts the upper part that moves to the right or to the left with respect to the frame. In order for this mechanism to work properly, it is necessary to open the window wide and screw the adjusting screw with a hexagon. After that, the window should be closed. If necessary, the procedure can be repeated.

Secondly, how to adjust the plastic windows, if it concerns the lower hinge of the hardware?

This part is necessary in order to adjust the lower segment of the sash of the window when moving to the right or left side and up, and also downward with respect to the frame.

In order for the lower segment of the sash of the plastic window to always be normal, it is necessary to rotate the screw, which is located on the lower frame. To adjust the sash of the windows when moving up and down, it is necessary to drive the hexagon. It is located on the sash of the plastic window.

Thirdly, if you need to repair the mechanism by which the leaf is pressed against the frame of the plastic window, then pay attention to its butt. He closes the window around the perimeter. At the end of the window is a large number of mechanisms that regulate the movement of its flaps. Logical under such circumstances is the question of how to regulate the plastic windows in this case. The process is usually carried out with a screwdriver or hexagon. The choice of the tool will depend on the hardware. It is necessary to rotate the head, which, in turn, is in contact with the frame of the plastic window at the moment when it closes. The head is similar to an eccentric, but it has a shape that just helps to regulate the mechanism of pressing the frame flap against the seal.

If it happens that all the methods described above do not help, then you should think about replacing the insulating glass with a new one. Repair of plastic windows with their own hands in this case is useless.

You may also encounter such a problem: the window will be closed loosely. Despite the fact that the handle is turned to the stop, the window is still not fully pressed. In this case, it is necessary to do the adjustment of the so-called response bars, which are mounted on the frame.

To do this, open the window, and also loosen the fixing screws installed on the slats, move them deep into the window for a couple of millimeters, then tighten the screws and close the window. If necessary, these operations should be repeated or nevertheless to seek help from specialists who know for sure how to regulate plastic windows so that they serve as faith and truth for many years.