Business, Agriculture
How and what to process a polycarbonate greenhouse in autumn
Polycarbonate is a material with very good performance characteristics. For gardeners, he came more than to his liking, and especially as a covering material for greenhouses. The structures made with it can withstand enormous loads, are unusually durable and are used nowadays everywhere. In this regard, it is quite natural to ask what to process a polycarbonate greenhouse in the autumn, many people have.
Disinfection of the construction with soap
Polycarbonate greenhouses, in contrast to covered with polyethylene, do not practically require any maintenance. They do not need to be dismantled for the winter. This material will withstand both strong winds and a high snow cover. However, of course, to carry out preventive measures that will reduce the risk of diseases of different cultures, still follows. So, what to process a polycarbonate greenhouse in the fall?
No special chemical agents should be used. It will be enough ordinary household soap. It must be scraped into a bucket of water in such a way that a solution that is not too saturated is obtained. This mixture is wiped by the walls of the structure from inside and outside. To do this, use only a soft rag. From the hard can remain scratches. If somewhere on the walls are found pieces of soaked dirt, you need to soak them with a soap solution and wait a while, wipe with a rag. Knife or other sharp objects can not be used categorically.
This is not the only way to carry out prevention. Next, we will consider how to process a greenhouse made of polycarbonate in autumn still.
Disinfection using a sulfur checker
Soil treatment in a greenhouse in autumn
Of course, as in any other, in polycarbonate construction, attention must be paid to the ground state. Its top layer is best replaced with a new one.
In any case, the autumn cultivation of the soil in the greenhouse must end with a thorough loosening. In this case, all plant residues must be removed and burned. After all these operations are performed, the construction is closed. In the winter, you can sketch snow on the ground.
Thus, the answer to the question: "What to process a polycarbonate greenhouse in the fall?" - is completely uncomplicated. Its price is 20 rubles. That's what a piece of laundry soap costs. The most important thing is to get the soil to be decontaminated inside the structure.
Similar articles
Trending Now