TechnologiesElectronics

Float Steam Trap

With the correct selection, calculation and installation of the steam trap is an energy-saving device that can save considerable money and also pay back all the costs for it.

It is an ideal way to drain condensate, where there is an automatic temperature control system, a Float Steam Trap. Ensuring maximum heat transfer and sufficient throughput just add to this device.

It is possible to remove air from the system by means of a built-in air vent. There is also a steam trap with a steam outlet to lock the supply line with steam. The principle of operation of a mechanical device is based on the fact that a difference is used when comparing the density of condensate and steam.

Varieties: float with a spherical, closed or open float or overturned bell type. The float steam trap has a valve section for discharging condensate, opens when a float associated with the valve plug floats up. Accordingly, the float floats when a condensate reaches a certain value in the body. After opening the valve, a small part of the condensate is squeezed out into the corresponding line, then the float returns to its place. This closes the valve seat hole. The principle of operation is based on regulation of level or overflow.

Advantages - no need to adjust, all significant parts are made of stainless steel with anti-corrosion coating. Also, high productivity at low loads, pressure fluctuations, stability of operation is observed. There are no omissions of steam, control and work are carried out quite simply. The setting is not required, the heat exchanger is in any case not flooded with condensate. The period of suitability, operation - 12 years, taking into account that the payback period is 2 months. The adjustment is carried out by moving the adjusting screw outside. The steam trap refers to the float mechanical steam traps. The principle of its work is the difference in the density of water and steam. Condensate is removed continuously when a certain level is reached, the ball float is connected by means of a lever with a seat and a valve.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.