Heat-resistant paint KUDO: description, characteristics, types, palette and reviews

Kudo's heat-resistant paint is widely used today. It is a silicone high-quality enamel, which is used for painting metallic products heated up to 600 ° C during operation. This includes the components of the car's exhaust system, parts of the water heating boiler and other equipment, elements of steam pipelines and pipelines. Used for internal and external works, which makes it universal. Apply this mixture is quite simple, it also applies to hard-to-reach places, because it has good opacity. Among the additional advantages can be distinguished also excellent weather resistance. But the light application is also supplemented by a small expense, because the layer is thin.

Description

The paint Kudo, which was discussed above, is distinguished by its durability and high quality. With it, you can protect surfaces that have not previously been painted. The application is also valid for old heating devices for the purpose of restoration. Areas of application are:

• Furnaces;
• Fireplaces;
• B-B-Q;
• Mangals;
• Radiators;
• Gas columns;
• Hot pipes.

In order to exclude the ingress of traces of the material, it is necessary to protect surfaces that must not be colored. Applying the mixture is not recommended for hot parts or surfaces. This recommendation is due to the fact that ignition may occur, therefore, before starting work, the elements must be cooled to ambient temperature. The application should be carried out from a distance of 25 cm. Pre-clean the surface of dirt and rust, dry, degrease, and then apply 2-3 layers, between which should be kept for 15 minutes. In this case, the temperature of the external environment should be approximately +20 ° C. Kudo's paint will be dried to the touch for 10 minutes all under the same conditions that were mentioned above. Full drying of the layer should be expected after 2 hours.

Technical specifications and palette

On sale you can find several shades of the paint article described, each of them has a certain heat resistance. For example, silvery color is able to undergo the influence of temperature up to 650 ° C, whereas black color can be up to 600 ° C. As for blue and red colors, as well as red-brown, a layer with such shades will be able to withstand temperatures up to 350 ° C. The white color of the paint described is the least heat-resistant, because it can withstand temperatures of up to 300 ° C. Each value can vary in both directions by 5 ° C.

Kudo paint should be applied to metal surfaces, the average flow rate is 2 m ² . It is to this area will take one 520-ml cylinder. There are 12 such cylinders in the box, whereas the size of the box is 270 x 205 x 207 mm. In the composition of the mixture:

• Polymethylphenylsiloxanes;
• Fillers;
• Pigments;
• Additives;
• Xylene;
• Methyl acetate;
• Butanol;
• propane;
• butane.

The paint is produced according to the technical specifications 2388-025-53934955-2010.

Usage feedback

According to buyers, Kudo paint should only be applied after vigorously shaking the bottle for 3 minutes. In order to achieve a coating that has benzo, oil, and salt resistance, it is necessary to heat the painted product. This indicates the need to heat the surface before operating to a temperature of 300 ° C. In this condition, the product should be left for 20 minutes.

Those consumers who already use this paint note that after completion of work it is necessary to turn the balloon upside down and spray until the enamel ceases to arrive. This will prevent clogging of the spray head.

Paint varieties

Kudo spray paint is presented for sale in a variety of varieties. Among others it is possible to allocate:

• Washable water paint for creativity and hobbies;
• Chalk paint ;
• Oil weapon ;
• Lacquer toning for wood;
• Paint for aluminum and zinc surfaces;
• Enamel for ceramics.

You may be interested in, for example, a tinting lacquer for wood, it is a composition for repair, construction and decorative-design works. It is possible to apply paint to baguettes, parquet, wooden plating of premises, etc. This spray can show the natural structure of the material, giving it the appearance of valuable rocks.

For reference

The coating has a high weather resistance and is able to withstand external mechanical influences. This Kudo aerosol paint protects the wood from biological damage like mold, blue, fungus, rot and insect damage.

Reviews on the removal of paint Kudo

On sale today is also a remover of Kudo paint . According to users, this is a high-quality tool for removing old paintwork. To cope with this composition will be able to remove paint even from hard-to-reach places of products that have complex surface geometry. If you compare this composition with traditional mechanical methods, then it removes coatings without damaging the surface. According to the buyers, the wash is able to affect most of the coatings by the type of alkyd, oil, nitrocellulose and acrylic mixtures. However, it should be remembered that powder coatings will not be able to do this.

Features of the use of washing

Paint Kudo, reviews about which it is quite useful to read before buying the product, can also be washed away by the above described means. Its application almost does not differ from the technology of using the enamel itself. Preliminary it is necessary to protect the surfaces from which the paint should not be removed. The external ambient temperature should be +10 ° С, only under such conditions it is possible to start work.

In hot weather, the workpieces to be coated should be covered with a polyethylene film, as evaporation of the ambient temperature increases the evaporation of the composition. To combat the most resistant coatings, it is necessary to apply the product several times, wait 5 to 15 minutes between layers, everything will depend on the ambient temperature and the thickness of the coating.

You will notice that the composition worked when the paint swelled and flaked off. This will soften the paintwork. After this, it will be easily disposed of with a rag or spatula. Before the subsequent painting, the surface must be degreased, for this purpose it is necessary to use a silicone remover from the same manufacturer. Do not allow the product to come into contact with rubber and plastic parts. If the components of the steam are to work for a long time without human control, the plastic and elastomer may collapse.