Decorative panels for interior decoration of walls: wooden, plastic, plaster (photo)

Decorative panels for interior decoration of walls (photo can be seen below) is an opportunity to repair in the shortest time and at the same time to save considerably on the materials and services of skilled workers. Thanks to a certain installation technology, additional preparation of walls, that is, puttying, leveling, etc., is absolutely not required. And the simplicity of laying allows you to set the panels qualitatively with your own hands.

The choice of design is really huge. Decorative panels for interior decoration of walls of different size and texture are produced. In this assortment it is not difficult to choose an exquisite ornament and the necessary color scheme.

For the production of panels use both natural materials and artificial ones. Such diversity allows satisfying the needs of people of any prosperity. For example, wood species are costly, MDF is a bit cheaper, and budgetary options are PVC.

Let's consider more in detail the most widespread decorative wall panels for internal furnish of walls.

Wooden panels

This type of finishing is widely represented in the building materials market. In form and size, they are divided into categories:

1. Sheet is a panel of large size (standard 122h244). They are used most often for finishing premises with an area of more than 20 square meters. M.
2. Tiled versions are usually made in the form of a square. The most popular sizes are 30x30, 90x90. They are easy enough to install, presented in a huge range of colors with different ornaments.
3. Rack. Such decorative wooden panels for interior decoration of walls are stacked in a set manner, as their width does not exceed 30 cm. The length of the rails varies from 2.5 meters or more.

When choosing this material, it is necessary to carefully check the quality of the tree: it is cut, dried, etc. It is also necessary to make sure that natural raw materials were used for the production of panels, since some manufacturers often resort to using low-grade materials to reduce the cost of products or even replace them with artificial ones.

Advantages and disadvantages of wooden panels

The tree has long been valued at a high level, so the cost of this kind of decoration is quite high. However, those who opted for this option will not regret their decision, since this material has many advantages. We list the main of them:

• Appearance. Wood has a unique pattern that brings to the interior originality and sophistication.
• Naturalness and ecological compatibility. The tree is able to regulate the humidity and create a favorable microclimate. And also it is completely harmless to humans.
• Operational properties. With high-quality processing decorative panels for interior decoration of walls have a service life of more than 15 years.
• Ease of care. In order to keep this material clean, it is enough to wipe the surface periodically with a damp cloth, while the dirt is easily laundered even without the addition of detergents.
• Quick and easy installation. The installation of panels does not require special skills.
• High level of thermal insulation. The tree has a feature: in the winter it does not let cold air into the room, and in the summer it is hot.
• Strength. This type of panels has good technical characteristics.
• Economical. During the erection of rough work is not carried out, which allows you to significantly save on building materials.
• Soundproofing. Due to the fact that the tree absorbs sounds well, it will be cozy and comfortable in a room with such decoration.

It would be very strange if such decorative panels for interior decoration of the walls had no flaws. Let's look at them:

• In rooms with high humidity it is not recommended to use them, as in time the tree will deform, become covered with fungus and rot.
• When using this type of finishing, the surface of the panels must be treated with special solutions.

Wall panels from gypsum

Gypsum is used in the form of finishing since ancient times. Earlier, fashionable curbs and rosettes. In modern interiors, the material for these elements was changed to polystyrene, but they did not completely abandon the gypsum. Now it is fashionable to use decorative gypsum panels for interior decoration of walls. Thanks to them, you can achieve elegant reliefs with clear or smooth lines. There are a lot of options for ornaments: abstraction, masonry, mountainous terrain, folds and much more. Initially, gypsum panels are sold in white, but they are easily painted with water-based paint. Thanks to the complex texture, the decoration of the walls is not only original, but also multifaceted.

Pros and cons of gypsum panels

Pluses:

1. Ecologically safe material.
2. Long service life.
3. Reconstruction is possible.
4. Wide range of design.
5. Can be repainted in different colors.
6. Do not shrink.
7. Do not require special care.
8. The shape of the panels is made to order, and there may be radial ones.
9. Do not absorb odors.
10. Do not attract dust.

Disadvantages:

1. The cost is above average.
2. Heavy weight panels.
3. Very fragile.

Plastic wall panels

Plastic is now a fairly common material. Basically, such popularity is based on price policy. However, very often the question arises about its safety. Immediately it is worth noting that polyvinyl chloride is an artificial material that has passed all the necessary checks. In its normal state, it is completely safe, only during combustion, this product releases hazardous substances. Acquiring decorative plastic panels for interior decoration of walls, it is necessary to check the quality certificate.

Advantages of plastic panels

1. High level of moisture resistance.
2. Long service life.
3. The mechanical loads are well tolerated.
4. Resistance to ultraviolet.
5. Variety of colors and textures.
6. A light weight.
7. Simple installation.
8. Easily cover the wiring.
9. They have excellent sound and heat insulation properties.
10. Easily laundered from dirt.

Cons of PVC panels

Plastic decorative panels for interior decoration of walls, like any other materials, have several drawbacks:

• When exposed to high temperatures, harmful substances can be released that have a detrimental effect on human health.
• After installation, a specific odor can be stored indoors for a long time.
• If the temperature fluctuates sharply, the surface of the panels may deform.
• Are unstable to damages, at strong impacts there are dents, cracks, scratches.