Today, the construction of a house made of aerated concrete is considered quite profitable financially, because this material is of the type of lightweight porous concrete. Such products are an excellent alternative to brick buildings. The erection is much faster, since the size of one block is much larger than the traditional brick. This material perfectly keeps the heat, but requires special protection during the work and in the operation of the structure in connection with hygroscopicity. The quality construction of a house made of aerated concrete will depend entirely on the correct technology of erection.
The work with the use of these blocks can be done by paying the delivery to the site itself. However, in some situations, when the construction of a house made of aerated concrete is carried out, the products are delivered independently. Transportation should be carried out in a polyethylene package, which has a reliable seal to protect the blocks from moisture. During construction work, the material is recommended to be stored under a canopy on a flat area. Also important is the fact that aerated concrete should be protected from mechanical influences, which can negatively affect the quality of products.
Many people want to know about the phased construction of a house made of aerated concrete, but it actually does not differ from the construction of buildings from other materials. First, an estimate is made for the construction of a new dwelling. At this stage, certain measurements of the site are made to begin work. If a standard design is assumed, then all major concerns are taken by the construction company, engaged in erection from the foundation to the roof. However, otherwise, you will have to face certain problems at each stage.
First of all, it will be necessary to choose the type of foundation that can withstand the load from the walls and roof, so that the construction of a house made of aerated concrete is not in jeopardy. Most often, a ribbon foundation is arranged, which is economically viable, if the organization of the basement is envisaged. If necessary, the plinth can be made of the same aerated concrete. The application of the blocks will greatly accelerate the work and will avoid additional warming. Before the beginning of the laying, the surface is carefully leveled with the help of a building level.
As a rule, the construction of a house made of aerated concrete is carried out using a special glue with the processing of all joints. It consists of a dry mixture, which is diluted with water to the desired density. The trowel is applied glue, and the alignment helps to make a spatula. Stacking each row is mandatory accompanied by a check of the horizontal, because any deviations can lead in the course of time to negative consequences. Of course, the cost of the binder is slightly higher in comparison with the cement mortar, but due to the lower consumption of glue it is possible to save considerable money.