HomelinessBuilding

Treatment of wood from fungus and mold. Antiseptic for wood

Despite the development of technological progress, one of the most popular building materials today is wood. It lies at the base of houses, fences, arbors, baths, and furniture. Wood is used for finishing the exterior and interior, as well as public and residential buildings. This material has many advantages, it is environmentally friendly and affordable. However, along with the pluses there are also negative characteristics, which are expressed in fire hazard, high water absorption, and also the possibility of decay.

The need to use antiseptics

Molds and fungus are often formed on wooden surfaces, which is especially true when the products are operated at high humidity. Since ancient times, wooden structures and products have been protected by various compounds that could, if not prevent, slow down the negative processes. However, the modern development of the chemical industry has made it possible to create more reliable and multifunctional compounds by which the material acquires the ability to withstand adverse factors, it serves much longer and looks more attractive.

Methods of applying compositions to protect wood from rotting

Wood processing antiseptic is carried out only after the preparation of the surface, which must be cleaned of dirt and dust, as well as grease and oil stains. Film-forming water-repellent compositions can be applied by spraying, brushing or roller. The choice of tool will depend on the density of the tool.

The water repellent is applied to the entire surface, and omissions and large stratification should be avoided. Work should be carried out with a limited temperature range - from +5 to +30 ° C. The effectiveness of the composition, you can see only after 15, a maximum of 30 hours, before that it is recommended to protect the treated surface from the negative effects of ultraviolet, wind and moisture.

Special attention is being paid to the end part of logs and boards. Hydrophobizing agent for wood protection should be applied in several ways, each layer is dried for about 30-180 minutes. If possible, the material is best to be immersed for some time in a container with a means for deeper penetration into the structure of the wood. If you are engaged in erecting a facade of wood, then the moisture-proof composition is simply necessary.

Protection from insects, mold and fungus

Special processing of wood is required in the case when it is affected by adverse external phenomena such as temperature fluctuations, intense sunlight and precipitation. In the course of this operation, destructive processes can start, the wood begins to rot, become moldy and fungus. If some of the zones have already been struck, and their area is too vast, then there will be no possibility to save the wooden structure. That's why experts recommend that antiseptics be used for prevention, which are realized in pasty or liquid form.

Antiseptic for wood is not capable of destroying bacteria, it only prevents their further spread. If the reproduction of microorganisms is already active, then antiseptic treatment should be carried out only after using potent fungicides. Logs and logs should be protected by antiseptics, protective coating is applied even before transportation, this is especially true of the time before long-term storage. Reprocessing is carried out after installation and stripping. Above such funds, paint and varnish materials can be applied.

Ways to use antiseptics

Wood processing antiseptic is conducted at a temperature above +5 ° C, it is important to choose a dry and clear day. The solution should be applied in several layers, each subsequent applied after the absorption of the surface. However, drying should not be allowed. The number of treatment cycles depends on the degree of contamination of the material. If you want to do preventive work, then the solution can be diluted with water, using a ratio of 1: 3. The application should be started from the top of the structure, it is necessary to descend gradually, this will eliminate the formation of streaks.

Different antiseptics are absorbed by the material at different rates. If you have to deal with raw wood, the absorption will not be so intense. To process the walls of a residential building, it may take many cycles, sometimes up to six. Antiseptic for wood should be purchased after the analysis of wood. For the treatment of pine boards, which have a natural protective layer, you will need less money than to impregnate round logs. It is important to choose the right tool. For processing wood during transportation and an unfinished building, which will be left for the winter, you need two different means. But for elements such as lower rims, floor beams, as well as logs that will carry the power load, difficult-to-washable or non-washable solutions are needed, which will protect the material during the entire service life.

Description of antiseptic for wood "Senezh"

Treatment of wood from fungus and mold can be carried out with the help of a preservative antiseptic, designed for responsible structures, operated in particularly difficult conditions. The composition is difficult to wash out and can protect the material not only from mold and fungus, but also from putrefaction, insects, and also blue. Surface after treatment may be affected by atmospheric and soil moisture, the material is able to contact the ground, as well as organic waste. The use of wood after such processing is allowed in a tropical humid climate.

The composition can be applied to previously treated or new beams, ceilings, beams, top and bottom crowns, poles, fences, fences, etc. However, this mixture is not recommended for surfaces that were previously coated with varnish, linseed oil, paint or other film-forming materials, Having water-repellent characteristics.

Key benefits of using antiseptic "Senezh"

If you are processing wood from fungus and mold by the composition "Senezh", then you should familiarize yourself with some of the advantages of this mixture, among them there should be a long period of biosecurity, difficult to wash out, high efficiency, and also the ability to penetrate into moist wood. After applying the mixture, the strength of the material does not deteriorate, it retains the texture, does not lose the ability to breathe. With the help of this tool you can stop the already begun biological defeat.

Features of the antiseptic "Neomid 430"

"Neomid 430" is an indelible preservative antiseptic, which is able to provide increased protection of material from different breeds. Operate products can even in wet conditions, contact with moisture and soil. Use the mixture for outdoor and indoor use. It excellently protects the material from damage by wood-destroying fungi, algae and mosses.

Such treatment of wood from fungus and mold can be carried out before the subsequent application of paint and varnish materials. The composition chemically binds well to the wood, which increases the preservative properties. And for effective protection after treatment with antiseptic, there is no need to apply paint and varnish materials. The product is absolutely environmentally safe, does not contain chromium and arsenic compounds.

Characteristics of antiseptic Tikkurila Vinha

If you need to carry out outdoor work on wood protection, then you can choose an antiseptic brand "Vinha", which forms a protective water-repellent film. The product is able to preserve the structure of the wood, it perfectly protects not only from mold, but also from moisture. The coating is resistant to mechanical and weathering. "Vinha" is able to fight with mold and blue. Such treatment of wood from fungus and mold can be conducted on new and previously treated surfaces. This antiseptic creates a semi-matte surface, and the color you can choose from the catalog.

Features of the antiseptic "Pinotex"

This is another composition for the treatment of wood, which has the properties of deep penetration, as well as priming. This mixture is created on the basis of a new formulation that is capable of increasing the antiseptic properties of the product. It is compatible with most paints and is intended for use before painting or applying other wood preservatives. Eliminates the material from rot, blue and mold, absorbs well, has bioactive substances in the composition and penetrates deeper layers. Such antiseptic treatment of wood should be carried out on cleaned grounds when carrying out outdoor works. Here you can include:

  • Doors;
  • Facades;
  • Fencing;
  • window;
  • Wood flooring;
  • Fences.

Conclusion

If you want to choose an antiseptic for wood that will reliably protect the material not only from the fungus, but also from the bluish and mold, it is necessary to pay attention to the durability and reliability of the product. It is important to think also about whether the composition will change the color of wood, for some consumers this property is fundamental. The protective treatment of wood may require the presence of special equipment, not only for application, but also for cooking. If the solution is planned to be used indoors, then it should be environmentally friendly.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.